journal article·2021-08

Processing of Fe-Based Alloys by Detonation Spraying and Spark Plasma Sintering

Ivanna D. Kuchumova, Igor S. Batraev, Arina V. Ukhina, Tatiana A. Borisenko, Uliana E. Bulanova, Vladimir Yu. Ulianitsky, Dina V. Dudina, Vladislav S. Shikalov, Vladimir F. Kosarev, Ivan A. Bataev, Guilherme Yuuki Koga, Alberto Moreira Jorge

Publisher page

Abstract

This work deals with iron-based amorphous alloys in the form of coatings and sintered materials. It compares the structure and properties of Fe-Cr-Nb-B alloys (Fe66Cr10Nb5B19 and Fe62Cr10Nb12B16) produced by detonation spraying and spark plasma sintering. The Fe66Cr10Nb5B19 alloy has a higher glass-forming ability than Fe62Cr10Nb12B16 and the gas-atomized Fe66Cr10Nb5B19 feedstock powder was mainly amorphous, while the Fe62Cr10Nb12B16 powder with the same particle size range was fully crystalline. Detonation spraying made it possible to produce coatings with an amorphous phase as the main phase with both powders. The microhardness of the Fe66Cr10Nb5B19 coatings was lower than that of the Fe66Cr10Nb5B19 sintered alloy, at the same level of porosity (< 1%). The wear resistance of the Fe66Cr10Nb5B19 coatings was higher than that of the sintered Fe66Cr10Nb5B19 alloy. Fe66Cr10Nb5B19 and Fe62Cr10Nb12B16 coatings showed close values of microhardness and wear resistance under dry linearly reciprocating conditions. Notably, the wear resistance of the coatings was higher than that of stainless steel. This work demonstrated that detonation spraying is suitable for manufacturing amorphous phase-based alloy coatings, even for compositions with moderate glass-forming ability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. A. Inoue, Stabilization of Metallic Supercooled Liquid and Bulk Amorphous Alloys, Acta Mater., 2000, 48(1), p 279-306.10.1016/S1359-6454(99)00300-6 ↗
2. C.A. Schuh, T.C. Hufnagel and U. Ramamurty, Mechanical Behavior of Amorphous Alloys, Acta Mater., 2007, 55(12), p 4067-4109.10.1016/j.actamat.2007.01.052 ↗
3. M.F. Ashby and A.L. Greer, Metallic Glasses as Structural Materials, Scr. Mater., 2006, 54(3), p 321-326.10.1016/j.scriptamat.2005.09.051 ↗
4. A. Inoue and A. Takeuchi, Recent Development and Application Products of Bulk Glassy Alloys, Acta Mater., 2011, 59(6), p 2243-2267.10.1016/j.actamat.2010.11.027 ↗
5. S. Pang, T. Zhang, K. Asami and A. Inoue, Synthesis of Fe-Cr-Mo-C-B-P Bulk Metallic Glasses with High Corrosion Resistance, Acta Mater., 2002, 50(3), p 489-497.10.1016/S1359-6454(01)00366-4 ↗
6. X.J. Gu, S.J. Poon and G.J. Shiflet, Mechanical Properties of Iron-Based Bulk Metallic Glasses, J. Mater. Res., 2007, 22(2), p 344-351.10.1557/jmr.2007.0036 ↗
7. Y. Yan and S. Xua, Preparation, Properties and Applications of Metal Glass, MATEC Web Conf., 2018, 175, p 01011.10.1051/matecconf/201817501011 ↗
8. M. Stoica, J. Eckert, S. Roth, H.F. Zhang, J. Schultz and W.H. Wang, Mechanical Behavior of Fe65.5Cr4Mo4Ga4P12C5B5.5 Bulk Metallic Glass, Intermetallics, 2005, 13(7), p 764-769.10.1016/j.intermet.2004.12.016 ↗
9. A.L. Greer, K.L. Rutherford and I.M. Hutchings, Wear Resistance of Amorphous Alloys and Related Materials, Int. Mater. Rev., 2002, 47(2), p 87-112.10.1179/095066001225001067 ↗
10. C.A.C. Souza, D.V. Ribeiro and C.S. Kiminami, Corrosion Resistance of Fe-Cr-Based Amorphous Alloys: An Overview, J. Non Cryst. Solids, 2016, 442, p 56-66.10.1016/j.jnoncrysol.2016.04.009 ↗
11. C. Suryanarayana and A. Inoue, Iron-Based Bulk Metallic Glasses, Int. Mater. Rev., 2013, 58(3), p 131-166.10.1179/1743280412Y.0000000007 ↗
12. J. Qiao, H. Jia and P.K. Liaw, Metallic Glass Matrix Composites, Mater. Sci. Eng. R, 2016, 100, p 1-69.10.1016/j.mser.2015.12.001 ↗
13. X.J. Gu, S.J. Poon, G.J. Shiflet and M. Widom, Ductility Improvement of Amorphous Steels: Roles of shear Modulus and Electronic Structure, Acta Mater., 2008, 56(1), p 88-94.10.1016/j.actamat.2007.09.011 ↗
14. T. Paul, A. Singh and S.P. Harimkar, Densification and Crystallization in Fe-Based Bulk Amorphous Alloy Spark Plasma Sintered in the Supercooled Liquid Region, Adv. Eng. Mater., 2017, 19(8), p 1700224.10.1002/adem.201700224 ↗
15. T. Paul and S.P. Harimkar, Prediction of Heating Rate Controlled Viscous Flow Activation Energy During Spark Plasma Sintering of Amorphous Alloy Powders, J. Phys. D Appl. Phys., 2017, 50, p 27LT01.10.1088/1361-6463/aa77e2 ↗
16. D.A. Santana, C.S. Kiminami, F.G. Coury and G.L. Liberato, Consolidation of Fe-Based Metallic Glass Powders by Hot Pressing, Mater. Res., 2019, 22(2), p e20180581.10.1590/1980-5373-mr-2018-0581 ↗
17. S.P. Harimkar, S.R. Paital, A. Singh, R. Aalund and N.B. Dahotre, Microstructure and Properties of Spark Plasma Sintered Fe-Cr-Mo-Y-B-C Bulk Metallic Glass, J. Non-Cryst. Solids, 2009, 355(43-44), p 2179-2182.10.1016/j.jnoncrysol.2009.07.007 ↗
18. X. Wu and Y. Hong, Fe-Based Thick Amorphous-Alloy Coating by Laser Cladding, Surf. Coat. Technol., 2001, 141(2-3), p 141-144.10.1016/S0257-8972(01)01263-4 ↗
19. Y. Guo, G.Y. Koga, A. Moreira Jorge Jr, S. Savoie, R. Schulz, C.S. Kiminami, C. Bolfarini and W.J. Botta, Microstructural Investigation of Fe-Cr-Nb-B Amorphous/Nanocrystalline Coating Produced by HVOF, Mater. Des., 2016, 111, p 608-615.10.1016/j.matdes.2016.09.027 ↗
20. C. Zhang, K.C. Chan, Y. Wu and L. Liu, Pitting Initiation in Fe-Based Amorphous Coatings, Acta Mater., 2012, 60(10), p 4152-4159.10.1016/j.actamat.2012.04.005 ↗
21. Y. Yang, C. Zhang, Y. Peng, Y. Yu and L. Liu, Effects of Crystallization on the Corrosion Resistance of Fe-Based Amorphous Coatings, Corros. Sci., 2012, 59, p 10-19.10.1016/j.corsci.2012.02.003 ↗
22. G.Y. Koga, R. Schulz, S. Savoie, A.R.C. Nascimento, Y. Drolet, C. Bolfarini, C.S. Kiminami and W.J. Botta, Microstructure and Wear Behavior of Fe-Based Amorphous HVOF Coatings Produced from Commercial Precursors, Surf. Coat. Technol., 2016, 309, p 938-944.10.1016/j.surfcoat.2016.10.057 ↗
23. G.Y. Koga, A.M. Jorge Junior, V. Roche, R.P. Nogueira, R. Schulz, S. Savoie, A.K. Melle, C. Loable, C. Bolfarini, C.S. Kiminami and W.J. Botta, Production and Corrosion Resistance Of thermally Sprayed Fe-Based Amorphous Coatings from Mechanically Milled Feedstock Powders, Metall. Mater. Trans. A, 2018, 49, p 4860-4870.10.1007/s11661-018-4785-y ↗
24. Y. Zhou, G. Ma, H. Wang, G.L. Li, S. Chen, H. Wang and M. Liu, Fabrication and Characterization of Supersonic Plasma Sprayed Fe-Based Amorphous Metallic Coatings, Mater. Des., 2016, 110, p 332-339.10.1016/j.matdes.2016.08.003 ↗
25. L. Xie, Y. Wang, X. Xiong and Z. Chen, Comparison of Microstructure and Tribological Properties of Plasma, High velocity Oxy-Fuel and Detonation Sprayed Coatings from an Fe-Based Powder, Mater. Trans., 2018, 59(10), p 1591-1595.10.2320/matertrans.M2018141 ↗
26. VYu. Ulianitsky, D.V. Dudina, A.A. Shtertser and I. Smurov, Computer-Controlled Detonation Spraying: Flexible Control of the Coating Chemistry and Microstructure, Metals, 2019, 9, p 1244.10.3390/met9121244 ↗
27. I.D. Kuchumova, I.S. Batraev, V. Yu Ulianitsky, A.A. Shtertser, K.B. Gerasimov, A.V. Ukhina, N.V. Bulina, I.A. Bataev, G.Y. Koga, Y. Guo, W.J. Botta, H. Kato, T. Wada, B.B. Bokhonov, D.V. Dudina and A. Moreira Jorge Jr., Formation of Metallic Glass Coatings by detonation Spraying of a Fe66Cr10Nb5B19 Powder, Metals, 2019, 9, p 846.10.3390/met9080846 ↗
28. I.D. Kuchumova, I.S. Batraev, N.Y. Cherkasova, D.K. Rybin, A.V. Ukhina, W.J. Botta, G.Y. Koga and A.M. Jorge Jr., The Influence of the O2/C2H2 Ratio on the Structure and Properties of Fe66Cr10Nb5B19 Detonation Coatings, Mater. Today Proc., 2020, 25, p 384-386.10.1016/j.matpr.2019.12.098 ↗
29. K. Yamada, H. Ohtani and M. Hasebe, Thermodynamic Analysis of the Fe-Cr-B Ternary System, High Temp. Mater. Process., 2008, 27(4), p 269-283.10.1515/HTMP.2008.27.4.269 ↗
30. D.A. Santana, G.Y. Koga, W. Wolf, I.A. Bataev, A.A. Ruktuev, C. Bolfarini, C.S. Kiminami, W.J. Botta and A.M. Jorge Jr., Wear-Resistant Boride Reinforced Steel Coatings Produced by Non-Vacuum Electron Beam Cladding, Surf. Coat. Technol., 2020, 386, p 125466.10.1016/j.surfcoat.2020.125466 ↗
31. V. Ulianitsky, A. Shtertser, S. Zlobin and I. Smurov, Computer–Controlled Detonation Spraying: From Process Fundamentals Toward Advanced Applications, J. Therm. Spray. Technol., 2011, 20, p 791-801.10.1007/s11666-011-9649-6 ↗
32. I.S. Batraev, E.S. Prokhorov and V.Y. Ul’yanitskii, Acceleration and Heating of Powder Particle by Gas Detonation Products in Channels with a Conical Passage, Comb. Expl. Shock Waves, 2014, 50, p 315-322.10.1134/S0010508214030095 ↗
33. T.P. Gavrilenko and Y.A. Nikolaev, Calculation of Detonation Gas Spraying, Comb. Expl. Shock Waves, 2007, 43, p 724-731.10.1007/s10573-007-0098-y ↗
34. G.Y. Koga, T. Ferreira, Y. Guo, D.D. Coimbrão, A.M. Jorge Jr., C.S. Kiminami, C. Bolfarini and W.J. Botta, Challenges in Optimizing the Resistance to coRrosion and Wear of Amorphous Fe-Cr-Nb-B Alloy Containing Crystalline Phases, J. Non-Cryst. Solids, 2021, 555, p 120537.10.1016/j.jnoncrysol.2020.120537 ↗
35. J.F. Archard, Wear theory and mechanisms, Wear Control Handbook. M.B. Peterson, W.O. Winer Ed., ASME, New York, 1980
36. R. Holm, Electric Contacts: Theory and Applications, Springer-Verlag, Berlin Heidelberg, 1981.
37. D. Huang, R. Li, L. Huang, V. Ji and T. Zhang, Fretting Wear Behavior of Bulk Amorphous Steel, Intermetallics, 2011, 19(10), p 1385-1389.10.1016/j.intermet.2011.04.014 ↗
38. H. Kasturi, T. Paul, S. Biswas, S. Habib Alavi and S.P. Harimkar, Sliding Wear Behavior of Spark-Plasma-Sintered Fe-Based Amorphous Alloy Coatings on Cu-Ni Alloy, J. Mater. Eng. Perform., 2018, 27, p 3629-3635.10.1007/s11665-018-3470-z ↗