Microstructural and Tribo-mechanical Properties of Arc-Sprayed CoCr-Based Coatings
Source abstract
Abstract
Abstract Due to their superior wear and oxidation resistance, Stellite™ coatings are widely used in industrial applications, where the coatings are exposed to high temperature. Common processes for applying Stellite™ coatings include the high-velocity oxy-fuel spraying, laser cladding, and plasma transferred arc welding. Although Stellite™ welding consumables or similar welding consumables in the form of cored wires (CoCr base without industrial property rights) are commercially available, there are hardly any studies on arc-sprayed Stellite™ coatings available in the literature. In this study, the microstructural characteristics of arc-sprayed deposits were investigated, which were produced using a CoCr-based cored wire with addition of 4.5 wt.% tungsten. The produced deposits were examined in its as-sprayed state as well as after exposed to elevated temperatures. The microstructure was scrutinized by means of electron microscopy, energy-dispersive x-ray spectroscopy, as well as x-ray diffraction analyses using synchrotron radiation. Tribo-mechanical tests were conducted in order to assess the performance of the arc-sprayed coating. The findings were discussed and compared to those obtained from conventional CoCr-based coatings. It was found that the arc-sprayed CoCr-based coating is predominantly composed of Co-rich, Cr-rich lamellae or lamellae comprising a Co(Cr)-rich solid solution interspersed with various oxides between the individual lamellae. Solid solution hardening serves as dominant strengthening mechanism, while precipitation hardening effects are hardly evident. With regard to the oxidation behaviour, the as-sprayed coating mainly contains CoCr2O4as well as traces of Co3O4. For heating above 550 °C, coating surface additionally consists of Fe2O3and Co3O4. In dry sliding experiments, the arc-sprayed CoCr-based coating shows a decreased wear resistance compared to CoCr-based coatings processed by HVOF and PTA, whereas the coefficient of friction (COF) sliding against alumina was similar to the COF observed for the HVOF-sprayed CoCr-based coating, but lower than the COF obtained for the CoCr-based hardfacing alloy deposited by PTA.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. H.E. Exner, Physical and Chemical Nature of Cemented Carbides, Int. Met. Revi., 1979, 24(1), p 149-173.
2. P.D. Wood, H.E. Evans, and C.B. Ponton, Investigation into the Wear Behaviour of Stellite 6 During Rotation as an Unlubricated Bearing at 600°C, Tribol. Int., 2011, 44(12), p 1589-1597.10.1016/j.triboint.2011.02.011 ↗
3. M.M. Ferozhkhan, M. Duraiselvam and K.G. kumar, and R. Ravibharath, Plasma Transferred Arc Welding of Stellite 6 Alloy on Stainless Steel for Wear Resistance, Procedia Technology, 2016, 25, p 1305-1311.10.1016/j.protcy.2016.08.226 ↗
4. G.R. Mirshekari, S. Daee, S.F. Bonabi, M.R. Tavakoli, A. Shafyei, and M. Safaei, Effect of Interlayers on the Microstructure and Wear Resistance of Stellite 6 Coatings Deposited on AISI 420 Stainless Steel by GTAW Technique, Surf. Interfaces, 2017, 9, p 79-92.10.1016/j.surfin.2017.08.005 ↗
5. J.-C. Shin, J.-M. Doh, J.-K. Yoon, D.-Y. Lee, and J.-S. Kim, Effect of Molybdenum on the Microstructure and Wear Resistance of Cobalt-Base Stellite Hardfacing Alloys, Surf. Coat. Technol., 2003, 166(2-3), p 117-126.10.1016/S0257-8972(02)00853-8 ↗
6. P. Sassatelli, G. Bolelli, M. Lassinantti Gualtieri, E. Heinonen, M. Honkanen, L. Lusvarghi, T. Manfredini, R. Rigon, and M. Vippola, Properties of HVOF-Sprayed Stellite-6 Coatings, Surf. Coat. Technol., 2018, 338, p 45-62.10.1016/j.surfcoat.2018.01.078 ↗
7. T.S. Sidhu, S. Prakash, and R.D. Agrawal, Studies of the Metallurgical and Mechanical Properties of High Velocity Oxy-Fuel Sprayed Stellite-6 Coatings on Ni- and Fe-Based Superalloys, Surf. Coat. Technol., 2006, 201(1-2), p 273-281.10.1016/j.surfcoat.2005.11.108 ↗
8. A. Kusmoko, D. Dunne, and H. Li, A Comparative Study for Wear Resistant of Stellite 6 Coatings on Nickel Alloy Substrate Produced By Laser Cladding, HVOF and Plasma Spray. Tech. IJSER, 2014, 4, p 32-36.
9. N. Jegadeeswaran, K. Udaya Bhat, and M.R. Ramesh, Oxidation Studies on As-Received and HVOF Sprayed Stellite-6 Coating on Turbine Alloys at 800 °C, IJSER, 2013, 4, p 214-220.
10. Š Houdková, Z. Pala, E. Smazalová, M. Vostřák, and Z. Česánek, Microstructure and Sliding Wear Properties of HVOF Sprayed, Laser Remelted and Laser Clad Stellite 6 Coatings, Surf. Coat. Technol., 2017, 318, p 129-141.10.1016/j.surfcoat.2016.09.012 ↗
11. R. Singh, D. Kumar, S.K. Mishra, and S.K. Tiwari, Laser Cladding of Stellite 6 on Stainless Steel to Enhance Solid Particle Erosion and Cavitation Resistance, Surf. Coat. Technol., 2014, 251, p 87-97.10.1016/j.surfcoat.2014.04.008 ↗
12. M.S. Sawant and N.K. Jain, Evaluation of Stellite Coatings by µ-PTA Powder, Laser, and PTA Deposition Processes, Mater. Manuf. Processes, 2018, 33(10), p 1043-1050.10.1080/10426914.2017.1364764 ↗
13. H. Kashani, A. Amadeh, and H.M. Ghasemi, Room and High Temperature Wear Behaviors of Nickel and Cobalt Base Weld Overlay Coatings on Hot Forging Dies, Wear, 2007, 262(7-8), p 800-806.10.1016/j.wear.2006.08.028 ↗
14. H. Zhang, Y. Gong, X. Chen, A. McDonald, and H. Li, A Comparative Study of Cavitation Erosion Resistance of Several HVOF-Sprayed Coatings in Deionized Water and Artificial Seawater, J. Therm. Spray Technol., 2019, 28(5), p 1060-1071.10.1007/s11666-019-00869-x ↗
15. A. Kumar, J. Boy, R. Zatorski, and L.D. Stephenson, Thermal Spray and Weld Repair Alloys for the Repair of Cavitation Damage in Turbines and Pumps: A Technical Note, J. Therm. Spray Technol., 2005, 14(2), p 177-182.10.1361/10599630523737 ↗
16. H.S. Sidhu, B.S. Sidhu, and S. Prakash, Hot Corrosion Behavior of HVOF Sprayed Coatings on ASTM SA213-T11 Steel, J. Therm. Spray Technol., 2007, 16(3), p 349-354.10.1007/s11666-007-9029-4 ↗
17. A.S. Kang, J.S. Grewal, and G.S. Cheema, Effect of Thermal Spray Coatings on Wear Behavior of High Tensile Steel Applicable for Tiller Blades, Mater. Today: Proc., 2017, 4(2), p 95-103.10.2320/matertrans.M2016224 ↗
18. DHE Persson, On the Mechanisms Behind the Tribological Performance of Stellites, Uppsala University, doctoral thesis, 2005
19. T.W. Scharf, S.V. Prasad, P.G. Kotula, J.R. Michael, and C.V. Robino, Elevated Temperature Tribology of Cobalt and Tantalum-Based Alloys, Wear, 2015, 330–331, p 199-208.10.1016/j.wear.2014.12.051 ↗
20. D.H.E. Persson, S. Jacobson, and S. Hogmark, The Influence of Phase Transformations and Oxidation on the Galling Resistance and Low Friction Behaviour of a Laser Processed Co-Based Alloy, Wear, 2003, 254(11), p 1134-1140.10.1016/S0043-1648(03)00325-9 ↗
21. Y. Birol, High Temperature Sliding Wear Behaviour of Inconel 617 and Stellite 6 alloys, Wear, 2010, 269(9-10), p 664-671.10.1016/j.wear.2010.07.005 ↗
22. A. Motallebzadeh, E. Atar, and H. Cimenoglu, Raman Spectroscopy Characterization of Hypo-Eutectic CoCrWC Alloy Tribolayers, Ind. Lubr. Tribol., 2016, 68(4), p 515-520.10.1108/ILT-11-2015-0168 ↗
23. L. da Conceição and A.S.C.M. D’Oliveira, The Effect of Oxidation on the Tribolayer and Sliding Wear of a Co-Based Coating, Surf. Coat. Technol., 2016, 288, p 69-78.10.1016/j.surfcoat.2016.01.013 ↗
24. DURUM Verschleißschutz, Produkte, Fülldrähte. https://durmat.com/produkte/fuelldraehte/#kobalt-basis.
25. Deloro, Product Information, Hardfacing Alloys. https://www.deloro.com/productinformation/.
26. R. Varavallo, M.D. Manfrinato, L.S. Rossino, O. Maluf, and F. Camargo, Adhesion of Thermally Sprayed Metallic Coating, 18Th International Federation For Heat Treatment and Surface Engineering: International Federation for Heat Treatment and Surface Engineering congress, held in Rio de Janeiro, Brazil, July 26 - 30, 2010, L.d.C.F. Canale, Ed., ASTM Internat, 2012, p 559-573.10.1520/STP49457T ↗
27. B. Wielage, H. Pokhmurska, M. Student, V. Gvozdeckii, T. Stupnyckyj, and V. Pokhmurskii, Iron-Based Coatings Arc-Sprayed with Cored Wires for Applications at Elevated Temperatures, Surf. Coat. Technol., 2013, 220, p 27–35.10.1016/j.surfcoat.2012.12.013 ↗
28. Amir Hossein Pourmousa Abkenar, Wire-arc spraying system: Particle production, transport, and deposition, Library and Archives Canada = Bibliothèque et Archives Canada, 2007.
29. H.J. Fahrenwaldt and V. Schuler, Praxiswissen Schweißtechnik, Springer, 2012 (in ger).10.1007/978-3-8348-8199-1 ↗
30. A. Pourmousa, J. Mostaghimi, A. Abedini, and S. Chandra, Particle Size Distribution in a Wire-Arc Spraying System, J. Therm. Spray. Tech., 2005, 14(4), p 502-510.10.1361/105996305X76522 ↗
31. M.P. Planche, H. Liao, and C. Coddet, Relationships between In-Flight Particle Characteristics and Coating Microstructure with a Twin Wire Arc Spray Process and Different Working Conditions, Surf. Coat. Technol., 2004, 182(2-3), p 215-226.10.1016/S0257-8972(03)00873-9 ↗
32. A.P. Newbery, P.S. Grant, and R.A. Neiser, The Velocity and Temperature of Steel Droplets during Electric Arc Spraying, Surf. Coat. Technol., 2005, 195(1), p 91-101.10.1016/j.surfcoat.2004.12.035 ↗
33. H.L. Liao, Y.L. Zhu, R. Bolot, C. Coddet, and S.N. Ma, Size Distribution of Particles from Individual Wires and the Effects of Nozzle Geometry in Twin Wire Arc Spraying, Surf. Coat. Technol., 2005, 200(7), p 2123-2130.10.1016/j.surfcoat.2004.12.025 ↗
34. N.A. Hussary and J.V.R. Heberlein, Effect of System Parameters on Metal Breakup and Particle Formation in the Wire Arc Spray Process, J. Therm. Spray. Tech., 2007, 16(1), p 140-152.10.1007/s11666-006-9006-3 ↗
35. M. Kelkar and J. Heberlein, Wire-Arc Spray Modeling, Plasma Chem. Plasma Process., 2002, 22(1), p 1-25.10.1023/A:1012924714157 ↗
36. N.A. Hussary and J.V.R. Heberlein, Atomization and Particle-Jet Interactions in the Wire-Arc Spraying Process, J Therm Spray Tech, 2001, 10(4), p 604-610.10.1361/105996301770349123 ↗
37. JJ Fang, ZX Li, M Qian, CL Ren, and YW Shi, Effects of Powder Size in Cored Wire on Arc-Sprayed Metal-Ceramic Coatings, Global Coating Solutions: Proceedings of the 2007 International Thermal Spray Conference, May 14-16, 2007, Beijing, People's Republic of China, B.R. Marple, Ed., ASM International, 2007, p 365-370.10.31399/asm.cp.itsc2007p0365 ↗
38. V. Boronenkov and Y. Korobov, Fundamentals of Arc Spraying, Springer International Publishing, 2016.10.1007/978-3-319-22306-3 ↗
39. G. Jandin, H. Liao, Z.Q. Feng, and C. Coddet, Correlations between Operating Conditions, Microstructure and Mechanical Properties of Twin Wire Arc Sprayed Steel Coatings, Mater. Sci. Eng., A, 2003, 349(1-2), p 298-305.10.1016/S0921-5093(02)00767-0 ↗
40. I. Gedzevicius and A.V. Valiulis, Analysis of Wire Arc Spraying Process Variables on Coatings Properties, J. Mater. Process. Technol., 2006, 175(1-3), p 206-211.10.1016/j.jmatprotec.2005.04.019 ↗
41. P. Niranatlumpong and H. Koiprasert, Phase Transformation of NiCrBSi–WC and NiBSi–WC Arc Sprayed Coatings, Surf. Coat. Technol., 2011, 206(2-3), p 440-445.10.1016/j.surfcoat.2011.07.057 ↗
42. W. Tillmann and M. Abdulgader, Wire Composition: Its Effect on Metal Disintegration and Particle Formation in Twin-Wire Arc-Spraying Process, J Therm Spray Tech, 2013, 22(2-3), p 352-362.10.1007/s11666-012-9870-y ↗
43. A.P. Newbery and P.S. Grant, Oxidation During Electric Arc Spray Forming of Steel, J. Mater. Process. Technol., 2006, 178(1-3), p 259-269.10.1016/j.jmatprotec.2006.03.176 ↗
44. G. Derringer and R. Suich, Simultaneous Optimization of Several Response Variables, J. Qual. Technol., 1980, 12, p 214-219.10.1080/00224065.1980.11980968 ↗
45. W. Tillmann, L. Hagen, and D. Duda, A Study on the Tribological Behavior of Arc Sprayed Vanadium doped Stellite Coatings, Thermal Spray 2017: Proceedings from the International Thermal Spray Conference, June 7-9, 2017, Düsseldorf, Germany, 2017, DVS 336, p 354-359.10.31399/asm.cp.itsc2017p0354 ↗
46. C. Krywka, M. Paulus, C. Sternemann, M. Volmer, A. Remhof, G. Nowak, A. Nefedov, B. Pöter, M. Spiegel, and M. Tolan, The New Diffractometer for Surface X-ray Diffraction at Beamline BL9 of DELTA, J. Synchrotron Radiat., 2006, 13, p 8-13.10.1107/S0909049505035685 ↗
47. W.C. Oliver and G.M. Pharr, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 1992, 7(6), p 1564-1583.10.1557/JMR.1992.1564 ↗
48. J.B. Cheng, X.B. Liang, and B.S. Xu, Devitrification of Arc-Sprayed FeBSiNb Amorphous Coatings: Effects on Wear Resistance and Mechanical Behavior, Surf. Coat. Technol., 2013, 235, p 720-726.10.1016/j.surfcoat.2013.08.054 ↗
49. F. Cai, X. Huang, and Q. Yang, Mechanical Properties, Sliding Wear and Solid Particle Erosion Behaviors of Plasma Enhanced Magnetron Sputtering CrSiCN Coating Systems, Wear, 2015, 324–325, p 27-35.10.1016/j.wear.2014.11.008 ↗
50. J. Musil, F. Kunc, H. Zeman, and H. Poláková, Relationships between hardness, Young’s modulus and Elastic Recovery in Hard Nanocomposite Coatings, Surf. Coat. Technol., 2002, 154(2-3), p 304-313.10.1016/S0257-8972(01)01714-5 ↗
51. D.K. Shetty and I.G. Wright, On Estimating Fracture Toughness of Cemented Carbides from Palmqvist Crack Sizes, Journal of Materials Science Letters, 3rd ed., Chapman & Hall, Ed., 1986, p 365-368.10.1007/BF01748108 ↗
52. K. Niihara, A 1983 Fracture Mechanics Analysis of Indentation-Induced Palmqvist Crack in Ceramics, J. mater. Sci. let., 1983, 2(5), p 221-223.10.1007/BF00725625 ↗
53. E. Cabrol, C. Boher, V. Vidal, F. Rezai-Aria, and F. Touratier, Plastic Strain of Cobalt-Based Hardfacings Under Friction Loading, Wear, 2015, 330-331, p 354-363.10.1016/j.wear.2015.01.082 ↗
54. H. Kashani, M. Sadeghi Laridjani, A. Amadeh, M. Khodagholi, and S. Ahmadzadeh, The Influence of Volumetric Dilution on the Strain Induced γ→ε Martensitic Transformation in GTAW Processed Co–Cr–Mo alloy, Mater. Sci. Eng. A, 2008, 478, p 38-42.10.1016/j.msea.2007.05.061 ↗
55. M. Yildirim and A. Keles, Effect of Aging Time on Phase Transformation, Microstructure and Hardness of Co-Cr-Mo Alloys, Selcuk Univ. J. Eng. Sci. Tech., 2019, 7(1), p 146-153.
56. B.V. Cockeram, Fracture Toughness Testing and Toughening Mechanisms of Some Commercial Cobalt-Free Hardfacing Alloys, Surf. Coat. Technol., 1998, 108-109, p 377-384.10.1016/S0257-8972(98)00600-8 ↗
57. Š Houdková, E. Smazalová, and Z. Pala, Effect of Heat Treatment on the Microstructure and Properties of HVOF-Sprayed Co-Cr-W Coating, J Therm Spray Tech, 2016, 25(3), p 546-557.10.1007/s11666-015-0365-5 ↗