High-Velocity Arc Spraying of Fe-based Metallic Glasses with High Si Content
Source abstract
Abstract
Abstract Various feedstocks are available for the thermal spraying of metallic glasses, which are often alloyed with high amounts of cost-intensive elements. In previous steps, a novel, economic Fe-based metallic glass alloy with a high Si content has been developed using melt spinning. The aim of this work is to investigate the application of the alloy using the high-velocity arc spraying (HVAS) process. On this basis, four cored wires are manufactured with the aim of maximizing in situ intermixing and amorphous phase formation during the spraying process. The cross sections of the resulting coatings are analyzed by light microscopy, scanning electron microscopy and Vickers hardness testing. Phase analysis on the coatings is conducted with regards to the formation of amorphous phases using x-ray diffractometry (XRD) and differential scanning calorimetry. The XRD patterns indicate a mixture of (nano-) crystalline ferrite and amorphous phases. In particular, the coating manufactured with wire No. 1, a Fe-B-Si-C-Nb composition, exhibited good intermixing and a highly amorphous structure. This work demonstrates that glassy metallic coatings can be produced by means of HVAS using Fe-based cored wires comprising of conventional filler materials. A successful intermixing, in situ alloying and the subsequent formation of amorphous phases is achieved.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A. Inoue, High Strength Bulk Amorphous Alloys With Low Critical Cooling Rates (Overview), Mater. Trans. JIM., 1995, 36(7), p 866-875.10.2320/matertrans1989.36.866 ↗
2. A. Inoue and K. Hashimoto, Amorphous and Nanocrystalline Materials: Preparation, Properties, and Applications, Springer, 2001 Ref (in eng).10.1007/978-3-662-04426-1 ↗
3. C. Suryanarayana and A. Inoue, Iron-Based Bulk Metallic Glasses, Int. Mater. Rev., 2013, 58(3), p 131-166.10.1179/1743280412Y.0000000007 ↗
4. A. Inoue, B.L. Shen and C.T. Chang, Super-High Strength of Over 4000 Mpa for Fe-Based Bulk Glassy Alloys in [(Fe1−Xcox) 0.75B0.2Si0.05]96Nb4 System, Acta. Materialia., 2004, 52(14), p 4093-4099.10.1016/j.actamat.2004.05.022 ↗
5. M. Naka, K. Hashimoto and T. Masumoto, Corrosion Behavior of Amorphous and Crystalline Cu50ti50 and Cu50zr50 Alloys, J. Non-Cryst. Solids, 1978, 30(1), p 29-36.10.1016/0022-3093(78)90053-4 ↗
6. A. Makino, C. Chang, T. Kubota and A. Inoue, Soft Magnetic Fe-Si-B-P-C Bulk Metallic Glasses Without any Glass-Forming Metal Elements, J. Alloy. Compd., 2009, 483(1-2), p 616-619.10.1016/j.jallcom.2008.08.089 ↗
7. K. Amiya, A. Urata, N. Nishiyama and A. Inoue, Magnetic Properties of (Fe, Co)-B-Si-Nb Bulk Glassy Alloys With High Glass-Forming Ability, J. Appl. Phys., 2005, 97(10), p 10F913.10.1063/1.1859211 ↗
8. B. Cantor, Ed., Rapidly Quenched Metals: Proceedings of the Third International Conference on Rapidly Quenched Metals, organized jointly by the Materials Science Group of the University of Sussex … held at the University of Sussex, Brighton, on 3 - 7 July 1978, Metals Society, 1978 Ref (in eng).
9. K. Zhu, W. Jiang, J. Wu and B. Zhang, Effect of Mo on Properties of the Industrial Fe-B-Alloy-Derived Fe-Based Bulk Metallic Glasses, Int J Miner Metall Mater, 2017, 24(8), p 926-930.10.1007/s12613-017-1479-1 ↗
10. K. Bobzin, M. Öte and T. Königstein, Investigation of Amorphous/Nanocrystalline Iron-Based Thermal Barrier Coatings, J Therm Spray Tech, 2017, 26(3), p 388-397.10.1007/s11666-016-0520-7 ↗
11. C. Suryanarayana and A. Inoue, Bulk Metallic Glasses, CRC Press Taylor & Francis Group, 2018.
12. W. Guo, J. Zhang, Y. Wu, S. Hong and Y. Qin, Fabrication and Characterization of Fe-Based Amorphous Coatings Prepared by High-Velocity Arc Spraying, Mater. Des., 2015, 78, p 118-124.10.1016/j.matdes.2015.04.027 ↗
13. B. Huang, R.J. Perez, P.J. Crawford, A.A. Sharif, S.R. Nutt and E.J. Lavernia, Mechanically Induced Crystallization of Metglas Fe78b13si9 During Cryogenic High Energy Ball Milling, Nanostruct. Mater., 1995, 5(5), p 545-553.10.1016/0965-9773(95)00261-C ↗
14. K. Amiya, A. Urata, N. Nishiyama and A. Inoue, Fe-B-Si-Nb Bulk Metallic Glasses With High Strength Above 4000Mpa and Distinct Plastic Elongation, Mater. Trans. JIM., 2004, 45, p 1214-1218.10.2320/matertrans.45.1214 ↗
15. K. Bobzin, M. Öte, T.F. Linke and T. Königstein, Process Development for Innovative Iron Alloy Metallic Glass Coatings, Adv. Eng. Mater., 2016, 18(10), p 1833-1840.10.1002/adem.201600177 ↗
16. Deutsches Institut für Normung, Prüfbescheinigungen, 1st ed., Deutsches Institut für Normung, Berlin. Accessed November 19, 2021 Ref (in ger).
17. J.B. Cheng, X.B. Liang, Z.H. Wang and B.S. Xu, Microstructure and Mechanical Properties of Febsinb Metallic Glass Coatings by Twin Wire Arc Spraying, J. Therm. Spray Tech., 2013, 22(4), p 471-477.10.1007/s11666-013-9892-0 ↗
18. Deutscher Verband für Schweissen und verwandte Verfahren e.V., Dvs Merkblatt Dvs 0941-5, 0941-5, Deutscher Verband für Schweissen und verwandte Verfahren e.V., 2012. Accessed December 07, 2021.
19. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.-Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona, Fiji: an Open-Source Platform For Biological-Image Analysis, Nat Methods, 2012, 9(7), p 676-682 Ref (in eng).10.1038/nmeth.2019 ↗
20. E04 Committee, Test Methods For Determining Area Percentage Porosity in Thermal Sprayed Coatings, 2014th ed., E 2109 - 01, E04 Committee, West Conshohocken, PA. Accessed May 04, 2022.
21. DIN Deutsches Institut für Normung e. V., Metallische Werkstoffe – Härteprüfung Nach Vickers, 6507-1, DIN Deutsches Institut für Normung e. V., Berlin, 2018. Accessed May 04, 2022.
22. P. Fauchais, M. Fukumoto, A. Vardelle and M. Vardelle, Knowledge Concerning Splat Formation: an Invited Review, J. Therm. Spray Technol., 2004, 13(3), p 337-360.10.1361/10599630419670 ↗
23. A. Inoue, T. Iwadachi, T. Minemura and T. Masumoto, Nonequilibrium Phases in Fe-X-C (X=Cr, Mo or W) Ternary Alloys Quenched Rapidly from Melts, Trans. JIM, 1981, 22(3), p 197-209.10.2320/matertrans1960.22.197 ↗
24. Y. Kong and J.N. Hay, The Enthalpy of Fusion and Degree of Crystallinity of Polymers As Measured By Dsc, Eur. Polymer J., 2003, 39(8), p 1721-1727.10.1016/S0014-3057(03)00054-5 ↗