Thermal Shock and Ablation Behavior of Tungsten Nozzle Produced by Plasma Spray Forming and Hot Isostatic Pressing
Source abstract
Abstract
Tungsten nozzle was produced by plasma spray forming (PSF, relative density of 86 ± 2%) followed by hot isostatic pressing (HIPing, 97 ± 2%) at 2000 °C and 180 MPa for 180 min. Scanning electron microscope, x-ray diffractometer, Archimedes method, Vickers hardness, and tensile tests have been employed to study microstructure, phase composition, density, micro-hardness, and mechanical properties of the parts. Resistance of thermal shock and ablation behavior of W nozzle were investigated by hot-firing test on solid rocket motor (SRM). Comparing with PSF nozzle, less damage was observed for HIPed sample after SRM test. Linear ablation rate of nozzle made by PSF was (0.120 ± 0.048) mm/s, while that after HIPing reduced to (0.0075 ± 0.0025) mm/s. Three types of ablation mechanisms including mechanical erosion, thermophysical erosion, and thermochemical ablation took place during hot-firing test. The order of degree of ablation was nozzle throat > convergence > dilation inside W nozzle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Energetic Materials and Combustion · Advanced materials and composites · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. G.M. Song, Y. Zhou, Y.J. Wang, and T.Q. Lei, Throat Materials for Solid Rocket Motors, J. Solid Rocket Technol., 1998, 21(2), p 51-55
2. Y.G. Kuang, K.Q. Mo, G.L. Xu, and A.B. Wei, Study on Improving the Dimensional Stability of W-Cu Composites at High Temperature, Rare Met. Mater. Eng., 1997, 26(5), p 30-34
3. D. Zhang and Z.G. Chai, Failure Analysis on Throat Ring of an Engine, Fail. Anal. Preven., 1997, 2(4), p 26-30
4. K. Upadhya, J.M. Yang, and W.P. Hoffman, Advanced Materials for Ultrahigh Temperature Structural Applications Above 2000°C, Am. Ceram. Soc. Bull., 1997, 76(12), p 51-56
5. T.A. Jackson, D.R. Eklund, and A.J. Fink, High Speed Propulsion: Performance Advantage of Advanced Materials, J. Mater. Sci., 2004, 39(19), p 5905-591310.1023/B:JMSC.0000041687.37448.06 ↗
6. J.J. Park, Creep Strength of a Tungsten-Rhenium-Hafnium Carbide Alloy from 2200 to 2400K, Mater. Sci. Eng. A, 1999, 265(1–2), p 174-17810.1016/S0921-5093(98)01134-4 ↗
7. Y. Yahiro, M. Mitsuhara, K. Tokunakga, N. Yoshida, T. Hirai, K. Ezato, S. Suzuki, M. Akiba, and H. Nakashima, Characterization of Thick Plasma Spray Tungsten Coating on Ferritic/Martensitic Steel F82H for High Heat Flux Armor, J. Nucl. Mater., 2009, 386–388, p 784-78810.1016/j.jnucmat.2008.12.219 ↗
8. V. Piotter, B. Zeep, P. Norajitra, R. Ruprecht, A.V.D. Weth, and J. Hausselt, Development of a Powder Metallurgy Process for Tungsten Components, Fusion Eng. Des., 2008, 83(10–12), p 1517-152010.1016/j.fusengdes.2008.06.022 ↗
9. A. Devasenapathi, H.W. Ng, S.C.M. Yu, and A.B. Indra, Forming Near Net Shape Free-Standing Components by Plasma Spraying, Mater. Lett., 2002, 57(4), p 882-88610.1016/S0167-577X(02)00889-3 ↗
10. V.M. Hovis, Jr., Kingston, W.G. Northcutt, and O. Ridge Jr., Method of Fabricating Thin-Walled Articles of Tungsten-Nickel-Iron Alloy, U.S. Patent 4,332,617, 1 Jun 1982
11. Z.J. Wu, H.Y. Zhang, X.X. Du, and Y.H. Lu, Plasma Spraying Manufacturing Technique for Heating Objection of Tungsten Tubular, Powder Metall. Indus., 2005, 15(5), p 1-4
12. K.E. Rea, V. Viswanathan, A. Kruize, JThM De Hosson, S. O’Dell, T. McKechnie, S. Rajagopalan, R. Vaidyanathan, and S. Seal, Structure and Property Evaluation of a Vacuum Plasma Sprayed Nanostructured Tungsten-Hafnium Carbide Bulk Composite, Mater. Sci. Eng. A, 2008, 477(1–2), p 350-35710.1016/j.msea.2007.05.063 ↗
13. Y.M. Wang, X. Xiong, W.Z. Zhao, L. Xie, J.H. Yan, X.B. Min, and F. Zheng, Near-Net-Shape Tungsten Rhenium Alloy Parts Produced by Plasma Spray Forming and Hot Isostatic Pressing, Mater. Trans., 2014, 55(4), p 713-72110.2320/matertrans.M2013314 ↗
14. Y.M. Wang, X. Xiong, X.B. Min, L. Xie, and F. Zheng, Near-Net-Shape 95W-3.5Ni-1.5Fe Thin-Walled Products Produced by Plasma Forming, Mater. Sci. Eng. A, 2010, 527(21–22), p 5782-578910.1016/j.msea.2010.05.068 ↗
15. Y.M. Wang, X. Xiong, L. Xie, X. Xu, X.B. Min, and F. Zheng, Sintering Behavior of Tungsten Heavy Alloy Products Made by Plasma Spray Forming, Mater. Trans., 2011, 52(4), p 759-76710.2320/matertrans.M2010391 ↗
16. P. Pettersson, M. Johnsson, and Z. Shen, Parameters for Measuring in the Thermal Shock of Ceramic Materials with an Indentation-Quench Method, J. Eur. Ceram. Soc., 2002, 22(11), p 1883-188910.1016/S0955-2219(01)00504-0 ↗
17. R. McPherson, A Review of Microstructure and Properties of Plasma Sprayed Ceramic Coatings, Surf. Coat. Technol., 1989, 39–40, p 173-18110.1016/0257-8972(89)90052-2 ↗
18. H. Kuribayashi, K. Suganuma, Y. Miyamoto, and M. Koizumi, Effects of HIP Treatment on Plasma-Sprayed Ceramic Coating Onto Stainless Steel, Am. Ceram. Soc. Bull., 1986, 65(9), p 1306-1310
19. K.A. Khor, Y. Murakoshi, M. Takahashi, and T. Sang, Microstructure Change in Plasma Sprayed TiAl Coatings After Hot Isostatic Pressing, J. Mater. Sci. Lett., 1996, 15(20), p 1801-180410.1007/BF00275347 ↗
20. K.A. Khor, C.S. Yip, and P. Cheang, Post-Spray Hot Isostatic Pressing of Plasma Sprayed Ti-6Al-4V/Hydroxyapatite Composite Coatings, J. Mater. Process. Technol., 1997, 71(2), p 280-28710.1016/S0924-0136(97)00086-1 ↗
21. Y.M. Li, Z.Q. Zhang, and Y.X. Zhao, Principles of Solid Rocket Motor, National Defense Industry Press, Beijing, 1985
22. L.N. Peng, G.Q. He, J. Li, L. Wang, and F. Qin, Effect of Combustion Gas Mass Flow Rate on Carbon/Carbon Composite Nozzle Ablation in a Solid Rocket Motor, Carbon, 2012, 50(4), p 1554-156210.1016/j.carbon.2011.11.034 ↗
23. L. Pawlowsky, The Science and Engineering of Thermal Spray Coatings, Wiley, New York, 1995, p 43-79
24. M. Vardelle, A. Vardelle, A.C. Leger, P. Fauchais, and D. Gobin, Influence of Particle Parameters at Impact on Splat Formation and Solidification in Plasma Spraying Process, J. Therm. Spray Technol., 1995, 4(1), p 50-5810.1007/BF02648528 ↗
25. J.M. Houben and G.G. Liempd, Metallurgical Interactions of Mo and Steel During Plasma Spraying, Proceedings of the 10th International Thermal Spray Conference, German Welding Institute, Essen, Germany, 1983, p 66–71
26. R. Montanari, B. Riccardi, R. Volterri, and L. Bertamini, Characterisation of Plasma Sprayed W Coatings on a CuCrZr Alloy for Nuclear Fusion Reactor Applications, Mater. Lett., 2002, 52(1–2), p 100-10510.1016/S0167-577X(01)00375-5 ↗
27. R. McPherson and B.V. Shafer, Interlamellar Contact Within Plasma-Sprayed Coatings, Thin Solid Films, 1982, 97(3), p 201-20410.1016/0040-6090(82)90453-9 ↗
28. C.C. Berndt and R. McPherson, Fracture Mechanics Approach to the Adhesion of Flame and Plasma Sprayed Coatings, Proceedings of the 9th International Thermal Spray Conference, Nederlands Instituut voor Lastechniek, The Hague, The Netherlands, 1980, p 310–316
29. Y.J. Wang, Y. Zhou, G.M. Song, and T.Q. Lei, Thermal Shock and Ablation Behavior of ZrCp/W Composite by the Motor Test, J. Solid Rocket Technol., 2003, 26(3), p 62-65
30. S. Gordon and B.J. McBride, Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications. I: Analysis, NASA Lewis Research Center, NASA Reference Publication 1311-P1, Cleveland, OH, 1994, p 25-32
31. S. Gordon and B.J. McBride, Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications. II: User’s Manual and Program Description, NASA Lewis Research Center, NASA Reference Publication 1311-P2, Cleveland, OH, 1996, p 65-72
32. G.M. Song, Y.J. Wang, and Y. Zhou, Elevated Temperature Ablation Resistance and Thermophysical Properties of Tungsten Matrix Composites Reinforced with ZrC Particles, J. Mater. Sci., 2001, 36(19), p 4625-463110.1023/A:1017989913219 ↗
33. G.M. Song, Y. Zhou, and Y.J. Wang, Effect of Carbide Particles on the Ablation Properties of Tungsten Composites, Mater. Charact., 2003, 50(4/5), p 293-30310.1016/S1044-5803(03)00123-2 ↗
34. D.J. Lee, M.A. Umer, H.J. Ryu, and S.H. Hong, Elevated Temperature Ablation Resistance of HfC Particle-Reinforced Tungsten Composites, Int. J. Refract. Met. Hard Mater., 2014, 43, p 89-9310.1016/j.ijrmhm.2013.11.009 ↗
35. Erja Turunen, Tommi Varis, Tom E. Gustafsson, Jari Keskinen, Teppo Falt, and Simo-Pekka Hannula, Parameter Optimization of HVOF Sprayed Nanostructured Alumina and Alumina-Nickel Composite Coatings, Surf. Coat. Technol., 2006, 200(16/17), p 4987-499410.1016/j.surfcoat.2005.05.018 ↗
36. S.F. Peng, Tungsten Metallurgy, Metallurgy Industry Press, Beijing, 1981