journal article·2021-10

Simulation of Supersonic High-Pressure Gas Atomizer for Metal Powder Production

Shuai Zhang, Sina Alavi, Arash Kashani, Yushan Ma, Yinxiao Zhan, Wanxiang Dai, Wenju Li, Javad Mostaghimi

Publisher page

Abstract

A comprehensive study was performed on the atomization of molten stainless steel in a high-pressure gas atomizer (HPGA). Computer simulations were carried out using ANSYS-FLUENT to model the supersonic, turbulent flow of the atomization gas. Particle tracking and solidification were also included in the model to determine the fate of molten particles within the atomizer. Experiments were performed to investigate the effect of varying gas pressure and nozzle diameter on particle size distribution, melt flow rate, and pressure gradients on the surface of the nozzle. It is shown that increasing the atomization pressure leads to a finer powder size distribution, but a lower powder throughput. The results and conclusions provided in this work provide a valuable insight into how various operating parameters can affect the performance of HPGAs for metal powder synthesis. The findings can be used to improve the design of these systems in terms of efficiency, throughput, and product quality.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Rocket and propulsion systems research · Advanced Combustion Engine Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. X.-G. Li and U. Fritsching, Process Modeling Pressure-Swirl-Gas-Atomization for Metal Powder Production, J. Mater. Process. Technol., 2017, 239, p 1–17.10.1016/j.jmatprotec.2016.08.009 ↗
2. D. Firmansyah, R. Kaiser, R. Zahaf, Z. Coker, T. Choi and D. Lee, Numerical Simulation of Supersonic Gas Atomization of Liquid Metal Droplets, Jpn. J. Appl. Phys., 2014, 53, p 05HA09.10.7567/JJAP.53.05HA09 ↗
3. G. Antipas, Gas Atomization of Aluminum Melts: Comparison of Analytical Models, Metals, 2012, 2(2), p 202–210.10.3390/met2020202 ↗
4. J. Ting and I.E. Anderson, A Computational Fluid Dynamics (CFD) Investigation of the Wake Closure Phenomenon, Mater. Sci. Eng., 2004, 379, p 264–276.10.1016/j.msea.2004.02.065 ↗
5. N. Zeoli, H. Tabbara and S. Gu, Three-Dimensional Simulation of Primary Break-up in a Close-Coupled Atomizer, Appl. Phys. A Mater. Sci. Process., 2012, 108, p 783–792.10.1007/s00339-012-6966-7 ↗
6. N. Zeoli and S. Gu, Numerical Modeling of Droplet Break-up for Gas Atomization, Comput. Mater. Sci., 2006, 38, p 282–292.10.1016/j.commatsci.2006.02.012 ↗
7. Cooper, K. P., Anderson, I. E., Ridder, S. D., and Biancaniello, Proc. Proceedings of TMS Annual Meeting in Nashville.
8. S.P. Mates and G.S. Settles, A Study of Liquid Metal Atomization using Close-Coupled Nozzles, Part 1: Gas Dynamic Behavior, Atom. Sprays, 2005, 15(1), p 19–40.10.1615/AtomizSpr.v15.i1.20 ↗
9. I.E. Anderson and R.L. Terpstra, Progress Toward Gas Atomization Processing with Increased Uniformity and Control, Mater. Sci. Eng. A, 2002, 326(1), p 101–109.10.1016/S0921-5093(01)01427-7 ↗
10. W. Zhao, F. Cao, Z. Ning, G. Zhang, Z. Li and J. Sun, A Computational Fluid Dynamics (CFD) Investigation of the Flow Field and the Primary Atomization of the Close Coupled Atomizer, Comput. Chem. Eng., 2012, 40, p 58–66.10.1016/j.compchemeng.2012.02.014 ↗
11. Figliola, R. S., and Anderson, I. E., Characterization of High Pressure Gas Atomization Flow Fields. In: Proceedings Computational & Numerical Techniques in Powder Metallurgy.
12. J. Mi, R. Figliola and I. Anderson, A Numerical Simulation of Gas Flow Field Effects on High Pressure Gas Atomization due to Operating Pressure Variation, Mater. Sci. Eng. A, 1996, 208(1), p 20–29.10.1016/0921-5093(95)10046-6 ↗
13. Fluent, A., 2019, Fluent 19.0 user’s guide. Ansys Fluent Inc.
14. D.C. Wilcox, Turbulence Modeling for CFD, DCW Industries, Inc., La Canada, 1998.
15. H.S. Couto and D. Bastos-Netto, Generalized Liquid Film Atomization Theory, J. Thermal Sci., 2000, 9, p 265–270.10.1007/s11630-000-0061-7 ↗
16. Liu, H., Numerical modelling of gas atomization in spray forming process. In: Proceedings of TMS Annual Meetings
17. A. Unal, Effect of Processing Variables on Particle Size in Gas Atomization of Rapidly Solidified Aluminum Powders, Mater. Sci. Technol., 1987, 3, p 1029–1039.10.1179/mst.1987.3.12.1029 ↗
18. J. Gretzinger and W.R. Marshal, Characteristics of Pneumatic Atomization, A.I.Ch.E J., 1961, 7(2), p 312–318.10.1002/aic.690070229 ↗
19. M. Stefan, U. Fritsching and K. Bauckhage, Jet Break Up of Liquid Metal in Twin Fluid Atomization, Mater. Sci. Eng., 2002, A326, p 122–133.
20. R. Kaiser, C. Li, S. Yang and D. Lee, A Numerical Simulation Study of the Path-Resolved Breakup Behaviors of Molten Metal in High-Pressure Gas Atomization: With Emphasis on the Role of Shock Waves in the Gas/Molten Metal Interaction, Adv. Powder Technol., 2018, 29, p 623–630.10.1016/j.apt.2017.12.003 ↗
21. Liu, A. B., Maher, D., and Reitz, R. D., 1993, Modeling the effects of drop drag and breakup on fuel sprays. SAE Technical Paper.10.4271/930072 ↗
22. J.C. Beale and R.D. Reitz, Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model, Atom. Sprays, 1999, 9, p 623–650.10.1615/AtomizSpr.v9.i6.40 ↗
23. Patterson, M. A., and Reitz, R. D., 1998, Modeling the Effect of Fuel Spray Characteristics on Diesel Engine Combustion and Emission. SAE Techincal Paper.10.4271/980131 ↗
24. A. Farrokhpanah, T.W. Coyle and J. Mostaghimi, Numerical Study of Suspension Plasma Spraying, J. Therm. Spray Technol., 2017, 26(1–2), p 12–36.10.1007/s11666-016-0502-9 ↗
25. T.L. Bergman, F.P. Incropera, D.P. DeWitt and A.S. Lavine, Fundamentals of Heat and Mass Transfer, Wiley, London, 2011.
26. B.J.S. Peter Pichler, J.W. Sowards and G. Pottlacher, Measurements of Thermophysical Properties of Solid and Liquid NIST SRM 316L Stainless Steel, J. Mater. Sci., 2020, 55, p 4081–4093.10.1007/s10853-019-04261-6 ↗
27. R.H. Bogaard, P.D. Desai, H.H. Li and C.Y. Ho, Thermophysical Properties of Stainless Steels, Thermochim. Acta, 1993, 218, p 373–393.10.1016/0040-6031(93)80437-F ↗
28. C.S. Kim, Thermophysical Properties of Stainless Steels, Argonne National Laboratory, Illinois, USA, 1975.10.2172/4152287 ↗
29. T. Matsumoto, T. Misono, H. Fujii and K. Nogi, Surface Tension of Molten Stainless Steels under Plasma Conditions, J. Mater. Sci., 2005, 40, p 2197–2200.10.1007/s10853-005-1932-9 ↗
30. K.C. Mills and R.F. Broof, Measurements of Thermophysical Properties in High Temperature Melts, Mater. Sci. Eng., A, 1994, 178, p 77–81.10.1016/0921-5093(94)90522-3 ↗
31. B.J. Keene, K.C. Mills and R.F. Brooks, Surface Properties of Liquid Metals and Their Effects on Weldability, Mater. Sci. Technol., 1985, 1, p 559–567.10.1179/mst.1985.1.7.559 ↗
32. Z. Li, K. Mukai, M. Zeze and K. Mills, Determination of the Surface Tension of Liquid Stainless Steel, J. Mater. Sci., 2005, 40(9), p 2191–2195.10.1007/s10853-005-1931-x ↗
33. H. Lu and Q. Jiang, Surface Tension and its Temperature Coefficient for Liquid Metals, J. Phys. Chem. B, 2005, 109(32), p 15463–15468.10.1021/jp0516341 ↗
34. R. Unal, Improvements to Close Coupled Gas Atomisation Nozzle for Fine Powder Production, Powder Metall., 2007, 7(1), p 66–71.10.1179/174329007X164899 ↗
35. G. Wolf and H.W. Bergmann, Investigations on Melt Atomization with Gas and Liquefied Cryogenic Gas, Mater. Sci. Eng. A, 2002, 326(1), p 134–143.10.1016/S0921-5093(01)01433-2 ↗
36. J. Gretzinger and W. Marshall Jr., Characteristics of Pneumatic Atomization, AIChE J., 1961, 7(2), p 312–318.10.1002/aic.690070229 ↗
37. N. Ashgriz, Handbook of Atomization and Sprays: Theory and Applications, Springer, Berlin, 2011.10.1007/978-1-4419-7264-4 ↗
38. C.T. Crowe, Multiphase Flow Handbook, Taylor and Francis, London, 2006.
39. H. Henein, V. Uhlenwinkle and U. Fritsching, Metal Sprays and Spray Deposition, Springer, Berlin, 2017.10.1007/978-3-319-52689-8 ↗
40. O.D. Neikov, S.S. Naboychenko and N.A. Yefimov, Handbook of Non-Ferrous Metal Powders: Technologies and Applications, Elsevier, London, 2019.
41. U. Fritsching, Spray Simulation: Modeling and Numerical Simulation of Sprayforming Metals, Cambridge University Press, Cambridge, 2004.10.1017/CBO9780511536649 ↗