journal article·2025-04

Influence of Deposition Process and Binder Content on the Tribological Behavior of Chromium Carbide-Based Coatings: A Comparison Between APS and HVAF Processes

Oluwadamilola Ogunmola, Amit Roy, Fadhel Ben Ettouil, Alejandra I. Encalada, Richard R. Chromik, Ali Dolatabadi, Christian Moreau, Pantcho Stoyanov

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Tribology and Wear Analysis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. E.A. Baskharone, Introduction to Gas-Turbine Engines, Principles of Turbomachinery in Air-Breathing Engines:. E.A. Baskharone Ed., Cambridge University Press, 2012, p 1–8. https://doi.org/10.1017/CBO9780511616846.00210.1017/CBO9780511616846.002 ↗
2. R.E. Chupp, R.C. Hendricks, S.B. Lattime and B.M. Steinetz, Sealing in Turbomachinery, J. Propuls. Power, 2006, 22, p 313–349. https://doi.org/10.2514/1.1777810.2514/1.17778 ↗
3. P. Stoyanov, K.M. Harrington and A. Frye, Insights into the Tribological Characteristic of Cu-Based Coatings Under Extreme Contact Conditions, Jom, 2020, 72(6), p 2191–2197. https://doi.org/10.1007/s11837-020-04087-710.1007/s11837-020-04087-7 ↗
4. K. Holmberg, A. Matthews and H. Ronkainen, Coatings Tribology–Contact Mechanisms and Surface Design, Tribol. Int.. Int., 1998, 31(1–3), p 107–120. https://doi.org/10.1016/S0301-679X(98)00013-910.1016/S0301-679X(98)00013-9 ↗
5. A. Roy, V.N.V. Munagala, P. Patel, N. Sharifi, S.A. Alidokht, M. Makowiec, R.R. Chromik, C. Moreau and P. Stoyanov, Friction and Wear Behavior of Suspension Plasma Sprayed Tantalum Oxide Coatings at Elevated Temperatures, Surf. Coatings Technol., 2023, 452, p 129097. https://doi.org/10.1016/j.surfcoat.2022.12909710.1016/j.surfcoat.2022.129097 ↗
6. A.A. Pauzi, M.J. Ghazali, W.F. Hakim, W. Zamri and A. Rajabi, Wear Characteristics of Superalloy and Hardface Coatings in gas Turbine Applications–A Review, Metals, 2020, 10(9), p 1171. https://doi.org/10.3390/met1009117110.3390/met10091171 ↗
7. A. Khitab, Z.U. Abdin, I. Ahmed and T. Karim, Thermal Insulation of Buildings through Classical Materials and Nanomaterials, Recent Advances in Nano-Tailored Multi-Functional Cementitious Composites. Elsevier, 2022, p 277–303. https://doi.org/10.1016/B978-0-323-85229-6.00011-110.1016/B978-0-323-85229-6.00011-1 ↗
8. Š Houdková, Z. Česánek, E. Smazalová and F. Lukáč, “The High-Temperature Wear and Oxidation Behavior of CrC-Based HVOF Coatings, J. Therm. Spray Technol., 2018, 27(1), p 179–195. https://doi.org/10.1007/s11666-017-0637-310.1007/s11666-017-0637-3 ↗
9. M. Yang, Y. Liang, T. Huang, Q. Jin, D. Kong and P. Song, Oxidation Behaviour and Properties of Carbide Ceramic Reinforced Ni-Based Composite Coatings at 700 °C, Ceram. Int., 2024, 50(20), p 37504–37517. https://doi.org/10.1016/j.ceramint.2024.07.23410.1016/j.ceramint.2024.07.234 ↗
10. N. Vashishtha, R.K. Khatirkar and S.G. Sapate, Tribological Behaviour of HVOF Sprayed WC-12Co, WC-10Co-4Cr and Cr3C2−25NiCr Coatings, Tribol. Int.. Int., 2017, 105, p 55–68. https://doi.org/10.1016/j.triboint.2016.09.02510.1016/j.triboint.2016.09.025 ↗
11. F. Rubino, D. Merino, A.T. Silvestri, C. Munez and P. Poza, Mechanical Properties Optimization of Cr3C2-NiCr Coatings Produced by Compact Plasma Spray Process, Surf. Coatings Technol., 2023, 465, p 129570. https://doi.org/10.1016/j.surfcoat.2023.12957010.1016/j.surfcoat.2023.129570 ↗
12. S. Mahade, A. Mulone, S. Björklund, U. Klement and S.V. Joshi, Investigating Load-Dependent Wear Behavior and Degradation Mechanisms in Cr3C2-NiCr Coatings Deposited by HVAF and HVOF, J. Mater. Res. Technol., 2021, 15, p 4595–4609. https://doi.org/10.1016/j.jmrt.2021.10.08810.1016/j.jmrt.2021.10.088 ↗
13. S. Mahade, A. Mulone, S. Björklund, U. Klement and S.V. Joshi, Novel Suspension Route to Incorporate Graphene Nano-platelets in HVAF-Sprayed Cr3C2-NiCr Coatings for Superior Wear Performance, J. Mater. Res. Technol., 2021, 13, p 498–512. https://doi.org/10.1016/j.jmrt.2021.04.09610.1016/j.jmrt.2021.04.096 ↗
14. S. Matthews, B. James and M. Hyland, The Effect of Heat Treatment on the Oxidation Mechanism of Blended Powder Cr3C2-NiCr Coatings, J. Therm. Spray Technol., 2010, 19(1), p 119–127. https://doi.org/10.1007/s11666-009-9381-710.1007/s11666-009-9381-7 ↗
15. R.J. Alroy, M. Kamaraj and G. Sivakumar, Influence of Processing Condition and Post-Spray Heat Treatment on the Tribological Performance of High Velocity Air-Fuel Sprayed Cr3C2-25NiCr Coatings, Surf. and Coat. Technol., 2023, 463, p 129498. https://doi.org/10.1016/j.surfcoat.2023.12949810.1016/j.surfcoat.2023.129498 ↗
16. V. Matikainen, G. Bolelli, H. Koivuluoto, P. Sassatelli, L. Lusvarghi and P. Vuoristo, Sliding Wear Behaviour of HVOF and HVAF Sprayed Cr3C2-Based Coatings, Wear, 2017, 388–389, p 57–71. https://doi.org/10.1016/j.wear.2017.04.00110.1016/j.wear.2017.04.001 ↗
17. V. Matikainen, G. Bolelli, H. Koivuluoto, P. Sassatelli, L. Lusvarghi and P. Vuoristo, A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings: Microstructure and Carbide Retention, J. Therm. Spray Technol., 2017, 26(6), p 1239–1256. https://doi.org/10.1007/s11666-017-0578-x10.1007/s11666-017-0578-x ↗
18. G. Bolelli, L.M. Berger, T. Börner, H. Koivuluoto, V. Matikainen, L. Lusvarghi, C. Lyphout, N. Markocsan, P. Nylén, P. Sassatelli, R. Trache and P. Vuoristo, Sliding and Abrasive Wear Behaviour of HVOF- and HVAF-Sprayed Cr3C2-NiCr Hardmetal Coatings, Wear, 2016, 358–359, p 32–50. https://doi.org/10.1016/j.wear.2016.03.03410.1016/j.wear.2016.03.034 ↗
19. S. Matthews, Development of High Carbide Dissolution/Low Carbon Loss Cr3C2–NiCr Coatings by Shrouded Plasma Spraying, Surf. Coatings Technol., 2014, 258, p 886–900. https://doi.org/10.1016/j.surfcoat.2014.07.06210.1016/j.surfcoat.2014.07.062 ↗
20. E. Gariboldi, L. Rovatti, N. Lecis, L. Mondora and G.A. Mondora, Tribological and Mechanical Behaviour of Cr3C2-NiCr Thermally Sprayed Coatings After Prolonged Aging, Surf. Coatings Technol., 2016, 305, p 83–92. https://doi.org/10.1016/j.surfcoat.2016.07.08710.1016/j.surfcoat.2016.07.087 ↗
21. I.S. Batraev, V.Y. Ulianitsky, A.A. Shtertser, D.V. Dudina and A.V. Ukhina, Formation of Composite Coatings during Detonation Spraying of Cr3C2, J. of Comp. Sci., 2023 https://doi.org/10.3390/jcs702007110.3390/jcs7020071 ↗
22. M.C. Brupbacher, D. Zhang, W.M. Buchta, Y.-R. Rhim, D.C. Nagle and J.B. Spicer, Post-Treatment of Plasma-Sprayed Cr2O3 with Methane-Containing Gas for Conversion to Binder-Free Cr3C2, J. Therm. Spray Technol., 2015, 24(8), p 1513–1519. https://doi.org/10.1007/s11666-015-0348-610.1007/s11666-015-0348-6 ↗
23. A. Förg, M. Blum, A. Killinger, J.A.M. Nicolás and R. Gadow, Deposition of Chromium Oxide-Chromium Carbide Coatings via High Velocity Suspension Flame Spraying (HVSFS), Surf. Coatings Technol., 2018, 351, p 171–176. https://doi.org/10.1016/j.surfcoat.2018.07.07210.1016/j.surfcoat.2018.07.072 ↗
24. R. Umashanker, T. Bharathesh, B. Reddy and R. Saravanan, Transitional Wear of Plasma Spray Cr2O3 and Cr3C2 Coatings Deposited on Low Carbon Steel, Int. J. Emerg. Sci. Eng., 2022, 10(4), p 1–7. https://doi.org/10.35940/ijese.d2524.031042210.35940/ijese.d2524.0310422 ↗
25. S. Mahade, K. Narayan, S. Govindarajan, S. Bjorklund, N. Curry and S.V. Joshi, Exploiting Suspension Plasma Spraying to Deposit Wear-Resistant Carbide Coatings, Mater., 2019 https://doi.org/10.3390/ma1215234410.3390/ma12152344 ↗
26. N.V. Kobernik, A.S. Pankratov, R.S. Mikheev, A.G. Orlik, S.P. Sorokin, V.V. Petrova and D.V. Stroitelev, Chromium Carbides in Abrasion-Resistant Coatings, Rus. Eng. Res., 2020, 40(12), p 1013–1016. https://doi.org/10.3103/S1068798X2012008410.3103/S1068798X20120084 ↗
27. P. Fauchais, R. Etchart-Salas, V. Rat, J.F. Coudert, N. Caron and K. Wittmann-Ténèze, Parameters Controlling Liquid Plasma Spraying: Solutions, Sols, or Suspensions, J. Therm. Spray Technol., 2008, 17(1), p 31–59. https://doi.org/10.1007/s11666-007-9152-210.1007/s11666-007-9152-2 ↗
28. V. Matikainen, H. Koivuluoto and P. Vuoristo, A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings: Abrasion, Dry Particle Erosion and Cavitation Erosion Resistance, Wear, 2020, 446–447, p 203188. https://doi.org/10.1016/j.wear.2020.20318810.1016/j.wear.2020.203188 ↗
29. L. Janka, J. Norpoth, R. Trache, S. Thiele and L.-M. Berger, HVOF- and HVAF-Sprayed Cr3C2-NiCr Coatings Deposited from Feedstock Powders of Spherical Morphology: Microstructure Formation and High-Stress Abrasive Wear Resistance Up to 800 °C, J. Therm. Spray Technol., 2017, 26(7), p 1720–1731. https://doi.org/10.1007/s11666-017-0621-y10.1007/s11666-017-0621-y ↗
30. F. Arhami, F. Ben Ettouil and C. Moreau, As-Sprayed Highly Crystalline Yb2Si2O7 Environmental Barrier Coatings (EBCs) by Atmospheric Plasma Spray (APS), J. Therm. Spray Technol., 2023, 32(2–3), p 706–718. https://doi.org/10.1007/s11666-022-01526-610.1007/s11666-022-01526-6 ↗
31. Z. Tang, H. Kim, I. Yaroslavski, G. Masindo, Z. Celler, and D. Ellsworth, 2011 Novel Thermal Barrier Coatings Produced by Axial Suspension Plasma Spray. Therm. Spray 2011: ITSC Proceedings, 83713, p 571–575. https://doi.org/10.31399/asm.cp.itsc2011p057110.31399/asm.cp.itsc2011p0571 ↗
32. S. Rotich, N. Kipkirui, T.-T. Lin and S.-H. Chen, Effect of Varying Plasma Powers on High-Temperature Applications of Plasma-Sprayed Al0.5CoCrFeNi2Ti0.5 Coatings, Mater., 2022, 15(20), p 7198. https://doi.org/10.3390/ma1520719810.3390/ma15207198 ↗
33. C. Li and B. Sun, Effects of Spray Parameters on the Microstructure and Property of Al2O3 Coatings Sprayed by a Low Power Plasma Torch with a Novel Hollow Cathode, Thin Solid Films, 2004, 450(2), p 282–289. https://doi.org/10.1016/j.tsf.2003.11.16610.1016/j.tsf.2003.11.166 ↗
34. M. Lorenzo-Bañuelos, A. Díaz, D. Rodríguez, I.I. Cuesta, A. Fernández and J.M. Alegre, Influence of Atmospheric Plasma Spray Parameters (APS) on the Mechanical Properties of Ni-Al Coatings on Aluminum Alloy Substrate, Metals, 2021, 11(4), p 612. https://doi.org/10.3390/met1104061210.3390/met11040612 ↗
35. K. Torkashvand, M. Gupta, S. Björklund, F. Marra, L. Baiamonte and S. Joshi, Influence of Nozzle Configuration and Particle Size on Characteristics and Sliding Wear Behaviour of HVAF-Sprayed WC-CoCr Coatings, Surf. Coat. Technol., 2021, 423, p 127585. https://doi.org/10.1016/j.surfcoat.2021.12758510.1016/j.surfcoat.2021.127585 ↗
36. V. Matikainen, H. Koivuluoto, P. Vuoristo, J. Schubert and Š Houdková, Effect of Nozzle Geometry on the Microstructure and Properties of HVAF-Sprayed WC-10Co4Cr and Cr3C2-25NiCr Coatings, J. Therm. Spray Technol., 2018, 27(4), p 680–694. https://doi.org/10.1007/s11666-018-0717-z10.1007/s11666-018-0717-z ↗
37. ASTM, ASTM E-2109-14 Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings. 1999, 4 (Reapproved 2014), p 4–7 https://doi.org/10.1520/E2109-01R2110.1520/E2109-01R21 ↗
38. M. Asuquo, R.B. Nair, M. Fotoohinezhadkhales, A. Akbarnozari, P. Stoyanov and C. Moreau, Tribological Behavior of Atmospheric Plasma-Sprayed Cu-Ni Coatings, J. Therm. Spray Technol., 2024 https://doi.org/10.1007/s11666-024-01843-y10.1007/s11666-024-01843-y ↗
39. C. Bidmeshki, A.C. Liberati, A. Roy, A.I. Encalada, F. Ben Ettouil, S.A. Alidokht, R.R. Chromik, C. Moreau and P. Stoyanov, Microstructural, Mechanical, and Tribological Evaluation of Cu-Al-Based Coatings Deposited by APS and HVOF, J. Therm. Spray Technol., 2023, 32(8), p 2321–2335. https://doi.org/10.1007/s11666-023-01665-410.1007/s11666-023-01665-4 ↗
40. F. Otsubo, H. Era, K. Kishitake and T. Uchida, Properties of Cr3C2-NiCr Cermet Coating Sprayed by High Power Plasma and High Velocity Oxy-Fuel Processes, J. Therm. Spray Technol., 2000, 9(4), p 499–504. https://doi.org/10.1007/BF0260855310.1007/BF02608553 ↗
41. Y. Zhang, K. Chong, Q. Liu, Y. Bai, Z. Zhang, D. Wu and Y. Zou, High-Temperature Tribological Behavior of Thermally Treated Supersonic Plasma Sprayed Cr3C2-NiCr Coatings, Int. J. Refract. Met. Hard Mater., 2021, 95, p 105456. https://doi.org/10.1016/j.ijrmhm.2020.10545610.1016/j.ijrmhm.2020.105456 ↗
42. M. Mohammadtaheri, Q. Yang, Y. Li and J. Corona-Gomez, The Effect of Deposition Parameters on the Structure and Mechanical Properties of Chromium Oxide Coatings Deposited by Reactive Magnetron Sputtering, Coat, 2018 https://doi.org/10.3390/coatings803011110.3390/coatings8030111 ↗
43. A. Ranjan, A. Islam, M. Pathak, M.K. Khan and A.K. Keshri, Plasma Sprayed Copper Coatings for Improved Surface and Mechanical Properties, Vacuum, 2019, 168, p 108834. https://doi.org/10.1016/j.vacuum.2019.10883410.1016/j.vacuum.2019.108834 ↗
44. M. Mahajan, S. Rajpoot and O.P. Pandey, In-Situ Synthesis of Chromium Carbide (Cr3C2) Nanopowders by Chemical-Reduction Route, Int. J. Refract. Met. Hard Mater., 2015, 50, p 113–119. https://doi.org/10.1016/j.ijrmhm.2014.12.01010.1016/j.ijrmhm.2014.12.010 ↗
45. C. Shi, S. Liu, Q. Irfan, H.W. Gong and M. Hu, Deposition Mechanisms and Characteristics of Nano-Modified Multimodal Cr3C2–NiCr Coatings Sprayed by HVOF, Rev. Adv. Mater. Sci., 2022, 61(1), p 526–538. https://doi.org/10.1515/rams-2022-004210.1515/rams-2022-0042 ↗
46. MI. Boulos, PL. Fauchais, and JVR. Heberlein, 2021, Fundamentals of Combustion and Thermal Plasmas. In Thermal Spray Fundamentals: From Powder to Part, Springer Int. Publ. Cham, https://doi.org/10.1007/978-3-030-70672-2_310.1007/978-3-030-70672-2_3 ↗
47. D. Dzhurinskiy, A. Babu, P. Pathak, A. Elkin, S. Dautov and P. Shornikov, Microstructure and Wear Properties of Atmospheric Plasma-Sprayed Cr3C2-NiCr Composite Coatings, Surf. Coat. Technol., 2021, 428, p 127904. https://doi.org/10.1016/j.surfcoat.2021.12790410.1016/j.surfcoat.2021.127904 ↗
48. H.-B. Zhu, J. Shen, F. Gao, Y. Yu and C. Li, Microstructure and Sliding Wear Performance of Cr7C3-(Ni, Cr)3(Al, Cr) Coating Deposited from Cr7C3 In Situ Formed Atomized Powder, J. Therm. Spray Technol., 2017, 26(1), p 254–264. https://doi.org/10.1007/s11666-016-0498-110.1007/s11666-016-0498-1 ↗
49. P. Schwingenschlögl, P. Niederhofer and M. Merklein, Investigation on Basic Friction and Wear Mechanisms within Hot Stamping Considering the Influence of Tool Steel and Hardness, Wear, 2019, 426–427, p 378–389. https://doi.org/10.1016/j.wear.2018.12.01810.1016/j.wear.2018.12.018 ↗
50. Y. Liu, G. Yang, Z. Hang, H. Fu, N. Xi and H. Chen, Elevated Temperature Wear Behaviour of CeO2 Modified WC-12Co Coating, J. Rare Earths, 2019, 37(6), p 673–678. https://doi.org/10.1016/j.jre.2018.11.00710.1016/j.jre.2018.11.007 ↗
51. A.R. Govande, S. Tailor, B.R. Sunil and R. Dumpala, Effect of Inert Environment on the Sliding Wear Behaviour of the HVOF Sprayed WC-12Co Coating, Int. J. Refract. Met. Hard Mater., 2023, 111, p 106109. https://doi.org/10.1016/j.ijrmhm.2023.10610910.1016/j.ijrmhm.2023.106109 ↗
52. M. Federici, C. Menapace, A. Moscatelli, S. Gialanella and G. Straffelini, Effect of Roughness on the Wear Behavior of HVOF Coatings Dry Sliding against a Friction Material, Wear, 2016, 368, p 326–334. https://doi.org/10.1007/s42247-021-00274-710.1007/s42247-021-00274-7 ↗
53. D. Feng, M. Shen, X. Peng and X. Meng, Surface Roughness Effect on the Friction and Wear Behaviour of Acrylonitrile-Butadiene Rubber (NBR) Under Oil Lubrication, Tribol. Lett.. Lett., 2016, 65(1), p 10. https://doi.org/10.1007/s11249-016-0793-510.1007/s11249-016-0793-5 ↗
54. J.H.W. Siu and L.K.Y. Li, An Investigation of the Effect of Surface Roughness and Coating Thickness on the Friction and Wear Behaviour of a Commercial MoS2-Metal Coating on AISI 400C Steel, Wear, 2000, 237(2), p 283–287. https://doi.org/10.1016/S0043-1648(99)00349-X10.1016/S0043-1648(99)00349-X ↗
55. T.F.J. Quinn, Review of Oxidational Wear: Part I: The Origins of Oxidational Wear, Tribol. Int.. Int., 1983, 16(5), p 257–271. https://doi.org/10.1016/0301-679X(83)90086-510.1016/0301-679X(83)90086-5 ↗
56. M. Vardavoulias, The Role of Hard Second Phases in the Mild Oxidational Wear Mechanism of High-Speed Steel-Based Materials, Wear, 1994, 173(1), p 105–114. https://doi.org/10.1016/0043-1648(94)90262-310.1016/0043-1648(94)90262-3 ↗
57. M.E. Sikorski, Correlation of the Coefficient of Adhesion with Various Physical and Mechanical Properties of Metals, J. of Bas. Eng., 1963, 85(2), p 279–285. https://doi.org/10.1115/1.365657710.1115/1.3656577 ↗
58. Y. Liu, T.E. Fischer and A. Dent, Comparison of HVOF and Plasma-Sprayed Alumina/Titania Coatings—Microstructure, Mechanical Properties and Abrasion Behavior, Surf. Coat. Tech., 2003, 167(1), p 68–76. https://doi.org/10.1016/S0257-8972(02)00890-310.1016/S0257-8972(02)00890-3 ↗
59. S.W. Rukhande, W.S. Rathod and D. Bhosale, Sliding Wear Investigation of Ni-Based Coating for High-Temperature Application, Tribol. Ind., 2021, 43(2), p 247–258. https://doi.org/10.24874/ti.945.08.20.1110.24874/ti.945.08.20.11 ↗
60. Y.S. Borisov, Y.G. Tkachenko, I.N. Gorbatov, G.A. Avtonomov, D.Z. Yurchenko and V.V. Rishin, Wear Behavior of Plasma-Sprayed Chromium-Carbide-Base Coatings at Temperatures of 20–1000 °C, Sov. Powder Met. Metal Ceram., 1978, 17(10), p 801–804. https://doi.org/10.1007/BF0079637110.1007/BF00796371 ↗
61. P. Ru, Y. Yang, Y. Zhao, W. Tian, Y. Shao, Y. Wang, W. Li and Y. Ma, Effects of SiC on Microstructure and Properties of Coatings Prepared by Plasma Spraying Cr2O3-Al-SiC Powder, J. Therm. Spray Technol., 2023, 32(5), p 1350–1361. https://doi.org/10.1007/s11666-023-01568-410.1007/s11666-023-01568-4 ↗
62. Y.G. Tkachenko, A.P. Épik, A.P. Garda, I.N. Gorbatov and V.M. Litvin, Wear Resistance of Detonation-Deposited Chromium-Carbide-Base Coatings at Temperatures of 20–1000°C, Sov. Powder Met. Metal Ceram., 1978, 17(8), p 619–622. https://doi.org/10.1007/BF0079733810.1007/BF00797338 ↗
63. N. Behera, M. R. Ramesh, and M. R. Rahman, Elevated Temperature Wear and Friction Performance of WC-CoCr/Mo and WC-Co/NiCr/Mo Coated Ti-6Al-4V Alloy. Mater. Charact, 2024, 215, p 114207. https://doi.org/10.1016/j.matchar.2024.11420710.1016/j.matchar.2024.114207 ↗