journal article·2024-03

Modeling the Formation of Thermal Spray Coatings on Substrates with Arbitrary Shapes

Behrouz Haghighi, Mohammad Passandideh-Fard, Javad Mostaghimi

Journal of Thermal Spray Technology· Volume 33· Issue 2-3
Publisher page

Abstract

Abstract The formation of Nickel coatings on stainless steel substrates and YSZ (Yttria-Stabilized Zirconia) on NiCrAlY in the Atmospheric Plasma Spray (APS) process is investigated. Coating formation over a substrate with an arbitrary shape (an inclined step in this paper) is considered. The topography of the coatings, as well as their microstructure, e.g., porosity, average thickness, and average roughness, are evaluated. An algorithm, which is based on the Monte-Carlo stochastic model, is employed. The significant difference between the coating temperature and that of the substrate leads to the formation of residual thermal stresses. These stresses are analyzed using Object Oriented Finite-element software (OOF) developed by the National Institute of Standards and Technology (NIST). An image of the cross-section of the coating is imported into the code, which utilizes an adaptive meshing technique and Finite- Element Method to calculate residual thermal stresses. The maximum stress in the coatings occurs at the interface between the coating and the substrate. The coatings' topography and microstructure are compared with those of the experiments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A. Feuerstein et al., Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review, J. Therm. Spray Technol., 2008, 17(2), p 199-213.10.1007/s11666-007-9148-y ↗
2. G. Barbezat, Advanced Thermal Spray Technology and Coating for Lightweight Engine Blocks for the Automotive Industry, Surf. Coat. Technol., 2005, 200(5), p 1990-1993.10.1016/j.surfcoat.2005.08.017 ↗
3. B. Jahani, F. Azarmi, and A. Brooks, Development of Antibacterial Surfaces Via Thermal Spray Coating Techniques, Biomed. Sci. Instrum., 2018, 54, p 116-122.
4. D. Jia et al., Splat Formation Mechanism of Droplet-Filled Cold-Textured Groove During Plasma Spraying, Appl. Therm. Eng., 2020, 173, 115239.10.1016/j.applthermaleng.2020.115239 ↗
5. P. Xu et al., Superhydrophobic Ceramic Coatings with Lotus Leaf-like Hierarchical Surface Structures Deposited via Suspension Plasma Spray Process, Surf. Interf., 2023, 38, 102780.10.1016/j.surfin.2023.102780 ↗
6. J. Mostaghimi et al., Thermal Spray Copper Alloy Coatings as Potent Biocidal and Virucidal Surfaces, J. Therm. Spray Technol., 2021, 30(1), p 25-39.10.1007/s11666-021-01161-7 ↗
7. L. Pershin, et al. Copper-Embedded Facemasks for the Destruction of Covid-19 and Other Pathogens. in International Thermal Spray Conference (ITSC). 2022. Vienna, Austria.10.31399/asm.cp.itsc2022p0489 ↗
8. M. Pasandideh-Fard et al., Deposition of tin Droplets on a Steel Plate: Simulations and Experiments, Int. J. Heat Mass Transf., 1998, 41(19), p 2929-2945.10.1016/S0017-9310(98)00023-4 ↗
9. M. Bussmann, J. Mostaghimi, and S. Chandra, On a Three-Dimensional Volume Tracking Model of Droplet Impact, Phys. Fluids, 1999, 11(6), p 1406-1417.10.1063/1.870005 ↗
10. M. Pasandideh-Fard, S. Chandra, and J. Mostaghimi, A Three-Dimensional Model of Droplet Impact and Solidification, Int. J. Heat Mass Transf., 2002, 45(11), p 2229-2242.10.1016/S0017-9310(01)00336-2 ↗
11. R. Ghafouri-Azar et al., A Stochastic Model to Simulate the Formation of a Thermal Spray Coating, J. Therm. Spray Technol., 2003, 12(1), p 53-69.10.1361/105996303770348500 ↗
12. M. Xue, S. Chandra, and J. Mostaghimi, Investigation of Splat Curling up in Thermal Spray Coatings, J. Therm. Spray Technol., 2006, 15(4), p 531-536.10.1361/105996306X147315 ↗
13. M. Xue et al., Formation of Pores in Thermal Spray Coatings Due to Incomplete Filling of Crevices in Patterned Surfaces, Plasma Chem. Plasma Process., 2007, 27(5), p 647-657.10.1007/s11090-007-9097-8 ↗
14. M. Xue et al., A Stochastic Coating Model to Predict the Microstructure of Plasma Sprayed Zirconia Coatings, Modell. Simul. Mater. Sci. Eng., 2008, 16(6), 065006.10.1088/0965-0393/16/6/065006 ↗
15. H.B. Parizi et al., Analysis of the Microstructure of Thermal Spray Coatings: A Modeling Approach, J. Therm. Spray Technol., 2010, 19(4), p 736-744.10.1007/s11666-010-9494-z ↗
16. Mahendru, P., M. Tembely, and A. Dolatabadi, Artificial Intelligence Models for Analyzing Thermally Sprayed Functional Coatings. J. Therm. Spray Technol. 2023.10.1007/s11666-023-01554-w ↗
17. J. García et al., In-situ High Temperature Stress Analysis of Ti(C, N) Coatings on Functionally Graded Cemented Carbides by Energy Dispersive Synchrotron X-ray Diffraction, Int. J. Refract Metal Hard Mater., 2016, 56, p 27-34.10.1016/j.ijrmhm.2015.12.001 ↗
18. X.C. Zhang et al., An Analytical Model for Predicting Thermal Residual Stresses in Multilayer Coating Systems, Thin Solid Films, 2005, 488(1-2), p 274-282.10.1016/j.tsf.2005.04.027 ↗
19. S. Langer, E. Fuller, and W. Carter, OOF: An Image-Based Finite-Element Analysis of Material Microstructures, Comput. Sci. Eng., 2001, 3, p 15-23.10.1109/5992.919261 ↗
20. C.-H. Hsueh et al., Effects of Interface Roughness on Residual Stresses in Thermal Barrier Coatings, J. Am. Ceram. Soc., 1999, 82(4), p 1073-1075.10.1111/j.1151-2916.1999.tb01878.x ↗
21. R. Ghafouri-Azar, J. Mostaghimi, and S. Chandra, Modeling Development of Residual Stresses in Thermal Spray Coatings, Comput. Mater. Sci., 2006, 35(1), p 13-26.10.1016/j.commatsci.2005.02.007 ↗
22. M. Friis et al., Investigation of Particle in-Flight Characteristics During Atmospheric Plasma Spraying of Yttria-Stabilized ZrO2: Part 1 Experimental, J. Therm. Spray Technol., 2001, 10(2), p 301-310.10.1361/105996301770349394 ↗
23. S.D. Aziz and S. Chandra, Impact, Recoil and Splashing of Molten Metal Droplets, Int. J. Heat Mass Transf., 2000, 43(16), p 2841-2857.10.1016/S0017-9310(99)00350-6 ↗
24. R. Ghafouri-Azar, et al. Numerical Simulation of Offset Deposition for Sequential Tin Droplets. in International Thermal Spray Conference (ITSC). 2002. Essen, Germany.10.31399/asm.cp.itsc2002p0972 ↗
25. S. Safai and H. Herman, Microstructural Investigation of Plasma-Sprayed Aluminum Coatings, Thin Solid Films, 1977, 45(2), p 295-307.10.1016/0040-6090(77)90263-2 ↗
26. H. Fukanuma, A Porosity Formation and Flattening Model of an Impinging Molten Particle in Thermal Spray Coatings, J. Therm. Spray Technol., 1994, 3(1), p 33-44.10.1007/BF02648997 ↗
27. H.R. Salimijazi et al., Measuring Substrate Temperature Variation During Application of Plasma-Sprayed Zirconia Coatings, J. Therm. Spray Technol., 2007, 16(4), p 580-587.10.1007/s11666-007-9050-7 ↗
28. K.A. Khor and Y.W. Gu, Thermal Properties of Plasma-Sprayed Functionally Graded Thermal Barrier Coatings, Thin Solid Films, 2000, 372(1), p 104-113.10.1016/S0040-6090(00)01024-5 ↗
29. T.G. Kollie, Measurement of the Thermal-Expansion Coefficient of Nickel from 300 to 1000 K and Determination of the Power-law Constants Near the Curie Temperature, Phys. Rev. B, 1977, 16(11), p 4872-4881.10.1103/PhysRevB.16.4872 ↗
30. A. Farrokhpanah, T.W. Coyle, and J. Mostaghimi, Numerical Study of Suspension Plasma Spraying, J. Therm. Spray Technol., 2016, 26(1-2), p 12-36.10.1007/s11666-016-0502-9 ↗
31. J. Mostaghimi, M. Pasandideh-Fard, and S. Chandra, Dynamics of Splat Formation in Plasma Spray Coating Process, Plasma Chem. Plasma Process., 2002, 22(1), p 59-84.10.1023/A:1012940515065 ↗
32. H. Chien, The Effects of Microstructural and Thermal Stresses on the Hardness of CVD Deposited α‐Al2O3 and TiCxN(1‐x) Coatings, in Materials Science and Engineering. 2011, Carnegie Mellon University: Pittsburgh, PA, USA
33. S.V. Raj et al., High Heat Flux Exposures of Coated GRCop-84 Substrates, Mater. Sci. Eng. A, 2007, 457(1-2), p 300-312.10.1016/j.msea.2006.12.133 ↗
34. J.A. Ruud et al., A New Method for Tensile Testing of Thin Films, J. Mater. Res., 1993, 8(1), p 112-117.10.1557/JMR.1993.0112 ↗
35. P. Pathak, et al. Contribution in Optimization of Honeycomb Abradable Seals Structure. in International Thermal Spray Conference (ITSC). 2021.10.31399/asm.cp.itsc2021p0031 ↗