journal article·2024-10Open access

Influence of Binding Energies on Required Process Conditions in Aerosol Deposition

Bahman Daneshian, Frank Gärtner, Hamid Assadi, Daniel Höche, Thomas Klassen, Wolfgang E. Weber

Abstract

Abstract With the high interest in aerosol deposition in order to form high-quality coatings by solid-state impact, there is an increasing demand for developing general guidelines to estimate needed particle velocities and thus process parameter sets for successful deposition of ceramic materials. By using modeling approaches, rather different material properties in first instance can be expressed in terms of binding energies. Needed velocities for possible bonding can then derived by impact simulations and compared to experimental results from the literature. In order to study the role of binding energy on the impact behavior of ceramic particles in aerosol deposition, a molecular dynamics study is presented. Single-particle impacts are simulated for a range of binding energies, particle sizes and impact velocities. The results show that increasing the binding energy from 0.22 to 0.96 eV results in up to three times higher characteristic velocities corresponding to the threshold of bonding or grain size-dependent fragmentation of the particles. However, regardless of the binding energy, exceeding the characteristic velocities results in a similar deformation and fragmentation pattern. This allows for a general representation of the impact behavior as a function of normalized impact velocity for different ceramic materials. Apart from dealing with prerequisites for bonding of different materials by aerosol deposition, this study could also be generally relevant to the high-velocity deformation behavior of ceramics with different grain sizes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Particle Dynamics in Fluid Flows · nanoparticles nucleation surface interactions · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. J. Akedo, Aerosol Deposition Method for Fabrication of Nano Crystal Ceramic Layer, Mater. Sci. Forum, 2004, 449–452, p 43-48. https://doi.org/10.4028/www.scientific.net/MSF.449-452.4310.4028/www.scientific.net/MSF.449-452.43 ↗
2. J. Akedo, Aerosol Deposition of Ceramic Thick Films at Room Temperature: Densification Mechanism of Ceramic Layers, J. Am. Ceram. Soc., 2006, 89, p 1834-1839. https://doi.org/10.1111/j.1551-2916.2006.01030.x10.1111/j.1551-2916.2006.01030.x ↗
3. J. Akedo, Room Temperature Impact Consolidation (RTIC) of Fine Ceramic Powder by Aerosol Deposition Method and Applications to Microdevices, J. Therm. Spray Technol., 2008, 17, p 181-198. https://doi.org/10.1007/s11666-008-9163-710.1007/s11666-008-9163-7 ↗
4. R. Moos, An Overview of the Aerosol Deposition Method: Process Fundamentals and New Trends in Materials Applications, J. Ceram. Sci. Technol., 2015, 6(3), p 147-182. https://doi.org/10.4416/JCST2015-0001810.4416/JCST2015-00018 ↗
5. H. Kwon, Y. Kim, H. Park, and C. Lee, Impact Behavior for Successful Particle–Particle Bonding in Vacuum Kinetic Spraying, J. Therm. Spray Technol., 2020, 30, p 542-557. https://doi.org/10.1007/s11666-020-01078-710.1007/s11666-020-01078-7 ↗
6. A. Elsenberg, T. Emmler, M. Schieda, F. Gärtner, and T. Klassen, Tuning Aerosol Deposition of BiVO4 Films for effective sunlight Harvesting, J. Therm. Spray Technol., 2023, 32, p 352-362. https://doi.org/10.1007/s11666-023-01550-010.1007/s11666-023-01550-0 ↗
7. B. Daneshian and H. Assadi, Impact Behavior of intrinsically Brittle Nanoparticles: A Molecular Dynamics Perspective, J. Therm. Spray Technol., 2013, 23, p 541-550. https://doi.org/10.1007/s11666-013-0019-410.1007/s11666-013-0019-4 ↗
8. B. Daneshian, F. Gaertner, H. Assadi, D. Hoeche, W. Weber, and T. Klassen, Size Effects of Brittle Particles in Aerosol Deposition—Molecular Dynamics Simulation, J. Therm. Spray Technol., 2021, 30, p 503-522. https://doi.org/10.1007/s11666-020-01149-910.1007/s11666-020-01149-9 ↗
9. B. Daneshian, F. Gaertner, W. Weber, T. Klassen, H. Assadi, and D. Hoeche, Molecular dynamics simulations of titanium dioxide as a model system for size effects in aerosol deposition, in Proceedings of the International Thermal Spray Conference (ITSC 2021), May 24–28, 2021(virtual), ASM Thermal Spray Society, 2021, p 354-359. https://doi.org/10.31399/asm.cp.itsc2021p035410.31399/asm.cp.itsc2021p0354 ↗
10. B. Daneshian, F. Gärtner, H. Assadi, M.V. Vidaller, D. Höche, and T. Klassen, Features of Ceramic Nanoparticle Deformation in Aerosol Deposition Explored by Molecular Dynamics Simulation, Surf. Coat. Technol., 2022, 429, p 127886. https://doi.org/10.1016/j.surfcoat.2021.12788610.1016/j.surfcoat.2021.127886 ↗
11. H. Park, H. Kwon, Y. Kim, and C. Lee, Computational Research on Factors Affecting Particle Velocity in a Vacuum Kinetic Spray Process, J. Therm. Spray Technol., 2019, 28, p 1945-1958. https://doi.org/10.1007/s11666-019-00941-610.1007/s11666-019-00941-6 ↗
12. J. Henon, M.A. Piechowiak, O. Durand-Panteix, G. Etchegoyen, O. Masson, C. Dublanche-Tixier, P. Marchet, B. Lucas and F. Rossignol, Dense and Highly Textured Coatings Obtained by Aerosol Deposition Method from Ti3SiC2 Powder: Comparison to a Dense Material Sintered by Spark Plasma Sintering, J. Eur. Ceram. Soc., 2015, 35, p 1179-1189. https://doi.org/10.1016/j.jeurceramsoc.2014.10.01210.1016/j.jeurceramsoc.2014.10.012 ↗
13. C.W. Kim, J.H. Choi, H.J. Kim, D.W. Lee, C.Y. Hyun, and S.M. Nam, Effects of Interlayer Roughness on Deposition Rate and Morphology of Aerosol-Deposited Al2O3 Thick Films, Ceram. Int., 2012, 38, p 5621-5627. https://doi.org/10.1016/j.jeurceramsoc.2014.10.01210.1016/j.jeurceramsoc.2014.10.012 ↗
14. D.W. Davies, A.H. Moyers, M.D. Gammage, J.W. Keto, M.F. Becker and D. Kovar, Deformation and Film Formation Mechanisms During High Velocity Impact of Silicon Carbide Nanoparticles, J. Aerosol Sci., 2022, 163, p 105997. https://doi.org/10.1016/j.jaerosci.2022.10599710.1016/j.jaerosci.2022.105997 ↗
15. A.H. Moyers, M.F. Becker, and D. Kovar, A Strain Density Function to Analyze Particle Size Effects During High Velocity Impacts of Yttria, J. Am. Ceram. Soc., 2024, 107, p 3925-3944. https://doi.org/10.1111/jace.1970810.1111/jace.19708 ↗
16. A.P. Thompson, H.M. Aktulga, R. Berger, D.S. Bolintineanu, W.M. Brown, P.S. Crozier, P.J. in ‘t Veld, A. Kohlmeyer, S.G. Moore, T.D. Nguyen, R. Shan, M.J. Stevens, J. Tranchida, C. Trott, and S.J. Plimpton, LAMMPS—A Flexible Simulation Tool for Particle-Based Materials Modeling at the Atomic, Meso, and Continuum Scales, Comput. Phys. Commun., 2022, 271, p 108171. https://doi.org/10.1016/j.cpc.2021.10817110.1016/j.cpc.2021.108171 ↗
17. T.A. Beu, Introduction to Molecular Dynamics Simulations, CRC Press, Boca Raton, 2023.
18. S. Nosé, A molecular Dynamics Method for Simulations in the Canonical Ensemble, Mol. Phys., 1984, 52, p 255-268. https://doi.org/10.1080/0026897840010120110.1080/00268978400101201 ↗
19. A. Stukowski, Visualization and Analysis of Atomistic Simulation Data with OVITO–the Open Visualization Tool, Model. Simul. Mater. Sci. Eng., 2009, 18, p 015012. https://doi.org/10.1088/0965-0393/18/1/01501210.1088/0965-0393/18/1/015012 ↗
20. J. Exner, M. Schubert, D. Hanft, J. Kita, and R. Moos, How to Treat Powders for the Room Temperature Aerosol Deposition Method to Avoid Porous, Low Strength Ceramic Films, J. Eur. Ceram. Soc., 2019, 39, p 592-600. https://doi.org/10.1016/j.jeurceramsoc.2018.08.00810.1016/j.jeurceramsoc.2018.08.008 ↗
21. S. Kuroyanagi, K. Shinoda, A. Yumoto, and J. Akedo, Size-dependent Quasi Brittle-Ductile Transition of Single Crystalline Alpha-Alumina Particles During Microcompression Tests, Acta Mater., 2020, 195, p 588-596. https://doi.org/10.1016/j.actamat.2020.05.06510.1016/j.actamat.2020.05.065 ↗
22. F. Shimizu, S. Ogata, and J. Li, Theory of Shear Banding in Metallic Glasses and Molecular Dynamics Calculations, Mater. Trans., 2007, 48, p 2923-2927. https://doi.org/10.2320/matertrans.MJ20076910.2320/matertrans.MJ200769 ↗
23. B. Daneshian, F. Gärtner, W.E. Weber, H. Assadi, and T. Klassen, The Impact of Binding Energies on the Necessary Conditions in Aerosol Deposition, Proc. Appl. Math. Mech., 2023, 23(3), p 1-7. https://doi.org/10.1002/pamm.20230027510.1002/pamm.202300275 ↗
24. H. Assadi, H. Kreye, F. Gärtner, and T. Klassen, Cold Spraying—A materials perspective, Acta Mater., 2016, 116, p 382-407. https://doi.org/10.1016/j.actamat.2016.06.03410.1016/j.actamat.2016.06.034 ↗
25. W. Benz and E. Asphaug, Simulations of Brittle Solids Using Smooth Particle Hydrodynamics, Comput. Phys. Commun., 1995, 87, p 253-265. https://doi.org/10.1016/0010-4655(94)00176-310.1016/0010-4655(94)00176-3 ↗