Microstructure and Properties of Multi-Element Ceramic-Reinforced 316L Stainless Steel Composite Coatings by Laser Directed Energy Deposition
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. M. Li, L. Huang, Y. Zhou, and G. Zhang, Effect of TiC Content on Microstructure and Properties of CrMnFeCoNi High-Entropy Alloy, J. Mater. Eng. Perform., 2024, 33(10), p 4987–4999.10.1007/s11665-023-08307-4 ↗
2. M. Kaseem, S. Fatimah, N. Nashrah, and Y.G. Ko, Recent Progress in Surface Modification of Metals Coated by Plasma Electrolytic Oxidation: Principle, Structure, and Performance, Prog. Mater. Sci., 2021 https://doi.org/10.1016/j.pmatsci.2020.10073510.1016/j.pmatsci.2020.100735 ↗
3. Q. Zhang, B. Han, M. Li, Z. Chen, C. Hu, and C. Jia, Comparison of CoCrFeNi Coatings Prepared Via High-Speed Laser Cladding and Normal Laser Cladding on Microstructure and Properties, Intermetallics, 2023 https://doi.org/10.1016/j.intermet.2022.10779510.1016/j.intermet.2022.107795 ↗
4. Y.-X. Zhou, J. Zhang, Z.-G. Xing, H.-D. Wang, and Z.-L. Lv, Microstructure and Properties of NiCrBSi Coating by Plasma Cladding on Gray Cast Iron, Surf. Coat. Technol., 2019, 361, p 270–279.10.1016/j.surfcoat.2018.12.055 ↗
5. W. Zhang, S. Li, X. Zhang, and X. Chen, Research and Development on Cold-Sprayed MAX Phase Coatings, Coatings, 2023 https://doi.org/10.3390/coatings1305086910.3390/coatings13050869 ↗
6. F. Yin, S. Hu, R. Xu, X. Han, D. Qian, W. Wei, L. Hua, and K. Zhao, Strain Rate Sensitivity of the Ultrastrong Gradient Nanocrystalline 316L Stainless Steel and its Rate-Dependent Modeling at Nanoscale, Int. J. Plast., 2020 https://doi.org/10.1016/j.ijplas.2020.10269610.1016/j.ijplas.2020.102696 ↗
7. N. Muhammad, D. Whitehead, A. Boor, and L. Li, Comparison of Dry and Wet Fibre Laser Profile Cutting of Thin 316L Stainless Steel Tubes for Medical Device Applications, J. Mater. Process. Technol., 2010, 210(15), p 2261–2267.10.1016/j.jmatprotec.2010.08.015 ↗
8. X. Zhou, R. Li, F. Liu, B. Wang, L. Wei, L. Tian, M. Yang, X. Song, and C. Tan, Microstructure Evolution and Corrosion Behavior Improvement of Oscillation Laser Welded 2205/316L Dissimilar Joints used in Offshore Platform, Ocean Eng., 2024 https://doi.org/10.1016/j.oceaneng.2024.11883310.1016/j.oceaneng.2024.118833 ↗
9. Q. Lu, C. Zhang, W. Wang, S. Jiang, L. Aucott, T. Yasmeen, and J. Jiang, Reveal the Viscoplastic Behaviour and Microstructure Evolution of Stainless Steel 316L, Materials, 2022 https://doi.org/10.3390/ma1520706410.3390/ma15207064 ↗
10. Y. Chabak, B. Efremenko, I. Petryshynets, V. Efremenko, A.G. Lekatou, V. Zurnadzhy, I. Bogomol, V. Fedun, K. Koval, and T. Pastukhova, Structural and Tribological Assessment of Biomedical 316 Stainless Steel Subjected to Pulsed-Plasma Surface Modification: Comparison of LPBF 3d Printing and Conventional Fabrication, Materials, 2021, 14(24), p 7671.10.3390/ma14247671 ↗
11. B. Wang, B. Yao, and Z. Han, Annealing Effect on Wear Resistance of Nanostructured 316L Stainless Steel Subjected to Dynamic Plastic Deformation, J. Mater. Sci. Technol., 2012, 28(10), p 871–877.10.1016/S1005-0302(12)60145-5 ↗
12. A.K. Bisht, R.O. Vaishya, R.S. Walia, and G. Singh, Nitrides Ceramic Coatings for Tribological Applications: A Journey from Binary to High-Entropy Compositions, Ceram. Int., 2024, 50(6), p 8553–8585.10.1016/j.ceramint.2023.12.245 ↗
13. H. Gopalan, A. Marshal, M. Hans, D. Primetzhofer, N. Cautaerts, B. Breitbach, B. Völker, C. Kirchlechner, J.M. Schneider, and G. Dehm, On the Interplay Between Microstructure, Residual Stress And Fracture Toughness of (Hf-Nb-Ta-Zr) C Multi-Metal Carbide Hard Coatings, Mater. Des., 2022, 1(224), 111323.10.1016/j.matdes.2022.111323 ↗
14. D. Wu, J. Shi, F. Niu, G. Ma, C. Zhou, and B. Zhang, Direct Additive Manufacturing of Melt Growth Al2O3-ZrO2 Functionally Graded Ceramics by Laser Directed Energy Deposition, J. Eur. Ceram. Soc., 2022, 42(6), p 2957–2973.10.1016/j.jeurceramsoc.2022.01.034 ↗
15. W. Yang, K. Zhang, D. Zeng, J. Liu, F. Li, and W. Liu, Microstructure Evolution and Wear Behavior of Stellite12 Coating Prepared by Laser-Directed Energy Deposition on H13 Steel, Mater. Today Commun., 2024 https://doi.org/10.1016/j.mtcomm.2024.11096010.1016/j.mtcomm.2024.110960 ↗
16. J. Li, and Z. Liu, Optimization Design and Interface Characteristics Research of High Damping NiTi - Nickel-Aluminum Bronze Functional Gradient Composite Coating Additively Manufactured by High-Speed Laser-Directed Energy Deposition, Surf. Coat. Technol., 2024 https://doi.org/10.1016/j.surfcoat.2024.13128010.1016/j.surfcoat.2024.131280 ↗
17. Y. Li, D. Zhang, H. Wang, and W. Cong, Fabrication of a TiC-Ti Matrix Composite Coating Using Ultrasonic Vibration-Assisted Laser Directed Energy Deposition: The Effects of Ultrasonic Vibration and TiC Content, Metals, 2021 https://doi.org/10.3390/met1105069310.3390/met11050693 ↗
18. Z. Chen, Z. Zhang, Y. Yang, G. Xiao, M. Yi, T. Zhou, and C. Xu, Influence of Interlayer Dwell Time on Microstructure and Mechanical Properties Additively Manufactured 316l Stainless Steel by Laser Directed Energy Deposition, J. Mater. Res. Technol.-Jmr&T, 2025, 34, p 1304–1312.10.1016/j.jmrt.2024.12.120 ↗
19. Y.T. Pei, and T.C. Zuo, Gradient Microstructure in Laser Clad TiC-Reinforced Ni-Alloy Composite Coating, Mater. Sci. Eng. A, 1998, 241(1–2), p 259–263.10.1016/S0921-5093(97)00501-7 ↗
20. J. Nurminen, J. Naekki, and P. Vuoristo, Microstructure and Properties of Hard and Wear Resistant MMC Coatings Deposited by Laser Cladding, Int. J. Refract. Met. Hard Mater., 2009, 27(2), p 472–478.10.1016/j.ijrmhm.2008.10.008 ↗
21. Y. Gao, Y. Liu, L. Wang, X. Yang, T. Zeng, L. Sun, and R. Wang, Microstructure Evolution and Wear Resistance of Laser Cladded 316L Stainless Steel Reinforced with In-Situ VC-Cr7C3, Surf. Coat. Technol., 2022, 15(435), 128264.10.1016/j.surfcoat.2022.128264 ↗
22. H. Li, Y. Hu, R. Di, R. Yuan, C. Shi, and J. Lei, Effects of WC Particles on Microstructure and Mechanical Properties of 316L Steel Obtained by Laser Melting Deposition, Ceram. Int., 2022, 48(14), p 20388–20399.10.1016/j.ceramint.2022.03.324 ↗
23. M.I. Naher, and S.H. Naqib, Possible Applications of Mo2C in the Orthorhombic and Hexagonal Phases Explored via ab-initio Investigations of Elastic, Bonding, Optoelectronic and Thermophysical Properties, Results Phys., 2022 https://doi.org/10.1016/j.rinp.2022.10550510.1016/j.rinp.2022.105505 ↗
24. W. Zhu, Y. Ge, and D. Kong, Microstructure and Tribological Performance of Laser-Cladded Mo2C-Reinforced NiMo Coatings Under Grease-Lubrication Condition, J. Therm. Spray Technol., 2022, 31(8), p 2635–2646.10.1007/s11666-022-01464-3 ↗
25. X.-C. Deng, X. Lan, Y.-L. Wang, and G.-H. Zhang, Effect of Mo2C on the Microstructure and Properties of (W, Mo)C-10Co Cemented Carbides, Int. J. Refract. Met. Hard Mater., 2023 https://doi.org/10.1016/j.ijrmhm.2023.10610310.1016/j.ijrmhm.2023.106103 ↗
26. R. Li, H. Wang, B. He, Z. Li, Y. Zhu, D. Zheng, X. Tian, and S. Zhang, Effect of α Texture on the Anisotropy of Yield Strength in Ti-6Al-2Zr-1Mo-1V Alloy Fabricated by Laser Directed Energy Deposition Technique, Mater. Sci. Eng. A, 2021 https://doi.org/10.1016/j.msea.2021.14177110.1016/j.msea.2021.141771 ↗
27. Z.-B. Li, G.-H. Zhang, and K.-C. Chou, Simultaneous Enhancements of Strength and Hardness for Fine-Grained W-NiFeCoCrMn Composites, Mater Charact, 2023 https://doi.org/10.1016/j.matchar.2023.11293310.1016/j.matchar.2023.112933 ↗
28. Y. Zhang, G. Zhu, B. Gao, L. Wang, Z. Li, L. Hu, Z. Shi, and Q. Yin, Effect of High-Current Pulsed Electron Beam on Properties of Graphene-Modified Aluminum Titanium Carbide Composites, Materials, 2022 https://doi.org/10.3390/ma1522787910.3390/ma15227879 ↗
29. M. Qi, B. Chen, C. Xia, Y. Liu, S. Liu, H. Zhong, X. Zou, T. Yang, and Q. Li, Microstructure, Mechanical Properties and Biocompatibility of Novel Ti-20Zr-xMo Alloys, J. Alloys Compd., 2021 https://doi.org/10.1016/j.jallcom.2021.16147810.1016/j.jallcom.2021.161478 ↗
30. X. Yang, X. Xu, T. Liu, G. Qin, and R. Chen, Strength and Ductility Dual-Enhancement of Ni36Co30Fe11Cr11Al6Ti5Nb1 High Entropy alloy by Directional Solidification, Vacuum, 2024 https://doi.org/10.1016/j.vacuum.2023.11283510.1016/j.vacuum.2023.112835 ↗
31. L. Chen, Y. Zhao, X. Chen, T. Yu, and P. Xu, Repair of Spline Shaft by Laser-Cladding Coarse TiC Reinforced Ni-based Coating: Process, Microstructure and Properties, Ceram. Int., 2021, 47(21), p 30113–30128.10.1016/j.ceramint.2021.07.189 ↗
32. J. Yu, and H. Ho, Microstructure and Mechanical Properties of (Ti, Nb)C Ceramic-Reinforced 316L Stainless Steel Coating by Laser Cladding, Appl. Sci., 2022 https://doi.org/10.3390/app1213668410.3390/app12136684 ↗
33. C. Zeng, W. Tian, W.H. Liao, and L. Hua, Microstructure and Porosity Evaluation in Laser-Cladding Deposited Ni-Based Coatings, Surf. Coat. Technol., 2016, 294, p 122–130.10.1016/j.surfcoat.2016.03.083 ↗
34. G. Huang, D. Gu, D. Dai, L. Yuan, R. Wang, and K. Xiong, Microstructure Evolution and Underlying Thermal Behavior of High-Content TiC Reinforced Titanium Matrix Composites Fabricated by Laser Directed Energy Deposition, J. Mater. Res. Technol. -Jmr&T, 2023, 23, p 3007–3022.10.1016/j.jmrt.2023.01.226 ↗
35. M. Li, C. Li, B. Li, Y. Zhou, L. Huang, A. Cai, C. Cui, S. Gao, G. Zhang, and B. Yang, Comparison of Fe30Co20Cr20Ni20Mo3 .5 High Entropy Alloy Coatings Prepared using Plasma Cladding, High-Speed Laser Cladding, and Deep Laser Cladding, Coatings, 2023, 13(11), p 1819.10.3390/coatings13111819 ↗
36. J. Yu, and H. Ho, Microstructure and Mechanical Properties of (Ti, Nb)C Ceramic-Reinforced 316L Stainless Steel Coating by Laser Cladding, Appl. Sci., 2022, 12(13), 6684.10.3390/app12136684 ↗
37. S. Li, T.J.S. Yamaguchi,, and Technology, C., High-Temperature Oxidation Performance of Laser-Cladded Amorphous TiNiSiCrCoAl High-Entropy Alloy Coating on Ti-6Al-4V Surface, Surf. Coat. Technol., 2022, 433, 128123.10.1016/j.surfcoat.2022.128123 ↗
38. C. Lu, R. Zhang, M. Xiao, X. Wei, Y. Yin, Y. Qu, H. Li, P. Liu, X. Qiu, and T. Guo, A Comprehensive Characterization of Virgin and Recycled 316L Powders during Laser Powder Bed Fusion, J. Mater. Res. Technol., 2022, 18, p 2292–2309.10.1016/j.jmrt.2022.03.125 ↗
39. G. Xian, J. Xiong, H. Fan, F. Jiang, H. Zhao, L. Xian, and Z.J.A.S.S. Qin, Mechanical and Wear Properties of TiN Films on Differently Pretreated TiCN-Based Cermets, Appl. Surf. Sci., 2021, 570, 151180.10.1016/j.apsusc.2021.151180 ↗
40. I. Shanenkov, D. Nikitin, A. Ivashutenko, I. Rahmatullin, Y. Shanenkova, A. Nassyrbayev, W. Han, A.J.S. Sivkov and C. Technology, Hardening the Surface of Metals with WC1-x Coatings Deposited by High-Speed Plasma Spraying, Surf. Coat. Technol., 2020, 389, 125639.10.1016/j.surfcoat.2020.125639 ↗
41. X. Ren, W. Sun, S. Tian, C. Zhu, M. Qin, Y. Yang, and W.J.M.C. Wu, Tribological and Electrochemical Behaviors of FeCoNiCrMox HEA Coatings Prepared by Internal Laser Cladding on 316L Steel Tube, Mater Charact, 2024, 211, 113906.10.1016/j.matchar.2024.113906 ↗
42. B. Han, S. Zhang, T. Zhang, Y. Chen, X. Qin, M. Li, C. Hu, M. Wei, and X.J.I. Xue, Hardness Enhancement Mechanism of AlxCoCrFeNiSi high-Entropy Alloy Coatings Prepared by Laser Cladding, Intermetallics, 2023, 158, 107909.10.1016/j.intermet.2023.107909 ↗
43. C.Y. Cui, H.H. Xu, J. Yang, X.G. Cui, and J.Z. Lu, Effects of Al Variations on the Microstructure and Mechanical Properties of Laser-Cladding AlxNbMo0. 5Ti1. 5Ta0. 5Cr0. 5 Refractory High-Entropy Alloy Coatings, J. Alloys Compd., 2025, 1010, 177445.10.1016/j.jallcom.2024.177445 ↗
44. H. Yang, B. Li, W. Chen, J. Lu, L. Xu, X. Ye, and D. Fang, Effect of Nb Element on Microstructure and Mechanical Properties of (Co30Cr25Fe40Ni5) 100–x Nb x High-Entropy Alloys, J. Mater. Eng. Perf., 2024, 34, p 14444–14455.10.1007/s11665-024-10222-1 ↗
45. J. Yan, M. Li, K. Li, J. Qiu, and Y. Guo, Effects of Cr Content on Microstructure and Mechanical Properties of WMoNbTiCr High-Entropy Alloys, J. Mater. Eng. Perform., 2020, 29(4), p 2125–2133.10.1007/s11665-020-04744-7 ↗
46. W.M. Tucho, P. Cuvillier, A. Sjolyst-Kvemeland, and V. Hansen, Microstructure and Hardness Studies of Inconel 718 manufactuRed by Selective Laser Melting Before and After Solution Heat Treatment, Mater. Sci. Eng. a-Struct. Mater. Prop. Microstruct. Proc., 2017, 689, p 220–232.10.1016/j.msea.2017.02.062 ↗
47. K. Majchrowicz, Z. Pakiela, J. Kaminski, M. Plocinska, T. Kurzynowski, and E. Chlebus, The Effect of Rhenium Addition on Microstructure and Corrosion Resistance of Inconel 718 Processed by Selective Laser Melting, Metall. Mater. Trans. a-Phys. Metall. Mater. Sci., 2018, 49A(12), p 6479–6489.10.1007/s11661-018-4926-3 ↗
48. H.Q. Sun, Y.N. Shi, and M.X. Zhang, Wear Behaviour of AZ91D Magnesium Alloy with a Nanocrystalline Surface Layer, Surf. Coat. Technol., 2008, 202(13), p 2859–2864.10.1016/j.surfcoat.2007.10.025 ↗
49. H. Lan, and Q. Liu, Design of [Al-(FeCoNi) 12] AlxCr3-x HEAs Based on Cluster-Plus-Glue-Atom Model and its Coating Fabricated by Laser Cladding, Intermetallics, 2020, 126, 106941.10.1016/j.intermet.2020.106941 ↗
50. S. Wang, X. Cui, G. Jin, Y. Liu, X. Wen, W. Zheng, and S. Wan, Study on Microstructure and Wear Resistance of Laser Cladding TiAlZrVNiX High Entropy Alloy Coating Based on Laves Phase Modulation, Surf. Coat. Technol., 2024 https://doi.org/10.1016/j.surfcoat.2024.13119710.1016/j.surfcoat.2024.131197 ↗
51. P. Zhang, S. Jiang, Y. Guo, Y. Sui, X. Ding, Z. Yao, Q. Zhang, and J. Yao, Microstructures and Wear Resistance of Mo Coating Fabricated by In Situ Laser-Assisted Plasma Spraying, J. Therm. Spray Technol., 2024, 33(1), p 233–245.10.1007/s11666-023-01683-2 ↗
52. H.R. Ezatpour, M.T. Parizi, G.R. Ebrahimi, M. Gupta, J. Li, and W. Guo, Effect of Hybrid Carbonaceous Reinforcement on Structure, Mechanical and Wear Properties of Spark Plasma Sintered CrCoFeMnNi HEA/GNP+ CNT Composite, J. Alloys and Comps., 2022, 992, 166110.10.1016/j.jallcom.2022.166110 ↗
53. W. Zhou, and D. Kong, Influence of Al2O3 Mass Fractions on Microstructure, Oxidation Resistance and Friction-Wear Behaviors of CoCrAlYTaSi Coatings, Surf. Coat. Technol., 2019, 379, 125058.10.1016/j.surfcoat.2019.125058 ↗
54. Y. Li, H. Yan, B. Zhang, P. Zhang, H. Shi, and Q. Lu, Investigating the Influence of TiN on Microstructural, Mechanical, and Tribological Properties in Selective Laser Melting of Inconel 718-Based Composites, Mater. Today Commun., 2024 https://doi.org/10.1016/j.mtcomm.2024.11007510.1016/j.mtcomm.2024.110075 ↗
55. H. Wu, Z.Y. Wang, M.S. Wang, R. Wang, S. Zhang, C.H. Zhang, C.L. Wu, H.T. Chen, and J. Chen, Microstructure Evolution, Corrosion and Corrosive Wear Properties of NbC-Reinforced FeNiCoCr-Based High Entropy Alloys Coatings Fabricated by Laser Cladding, Eng. Fail. Anal., 2025 https://doi.org/10.1016/j.engfailanal.2025.10935210.1016/j.engfailanal.2025.109352 ↗
56. I. Sulima, R. Kowalik, and P. Hyjek, The Corrosion and Mechanical Properties of Spark Plasma Sintered Composites Reinforced with Titanium Diboride, J. Alloy. Compd., 2016, 688, p 1195–1205.10.1016/j.jallcom.2016.07.132 ↗
57. J. Wang, Y. Chen, Y. Zhang, Y. Zhang, J. Li, J. Liu, Y. Liu, and W. Li, Microstructure Evolution and Acid Corrosion Behavior of CoCrFeNiCu1− xMox High-Entropy Alloy Coatings Fabricated by Coaxial Direct Laser Deposition, Corros. Sci., 2022, 198, 110108.10.1016/j.corsci.2022.110108 ↗
58. W. Cui, Y. Li, F. Li, X. Qi, X. Sun, Z. Pan, and J. Niu, Wear and Corrosion Properties of In-Situ TiC-TiB2 Modified Ni-Based Composite Coatings with Different B/C Ratios Prepared by Laser Cladding, Ceram. Int., 2024, 50(1), p 2424–2435.10.1016/j.ceramint.2023.11.027 ↗