High-Resolution Synchrotron µXRD and µXRF for Local Phase and Elemental Analysis in Suspension Plasma Sprayed Environmental Barrier Coatings
Source abstract
Abstract
Abstract Suspension plasma spraying (SPS) enables the fabrication of environmental barrier coatings (EBCs) with complex multilayer architectures; however, degradation in such systems often initiates locally at buried interfaces, making it difficult to resolve using conventional laboratory-scale characterization techniques. In this work, the applicability of synchrotron-based micro-x-ray diffraction (µXRD), combined with micro-x-ray fluorescence (µXRF), is evaluated for the characterization of SPS-deposited ytterbium disilicate (YbDS) EBCs. An as-sprayed YbDS coating was investigated as a baseline case to examine differences between conventional XRD and spatially resolved µXRD, while an annealed and CMAS-exposed YbDS coating was studied as a service-relevant case to probe localized phase evolution. The samples were selected from previously optimized SPS process conditions and are not intended for direct comparison. Laboratory-scale XRD provided global phase information, whereas µXRD enabled layer-specific phase identification and resolved localized interfacial features. In the as-sprayed condition, µXRD confirmed phase-pure YbDS, resolved the crystallinity of individual coating layers, and verified the absence of unintended interfacial reaction phases that are not accessible by conventional XRD. In the annealed + CMAS-exposed coating, µXRD and µXRF revealed the formation of a calcium–ytterbium–silicate oxyapatite phase confined to the YbDS/Si interface, highlighting the localized nature of CMAS-induced degradation. These results demonstrate that synchrotron microanalysis provides valuable complementary insight for probing localized phase evolution in thermally sprayed EBC systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. D.R. Clarke and C.G. Levi, Materials Design for the Next Generation Thermal Barrier Coatings, Annu. Rev. Mater. Res., 2003, 33, p 383–417. https://doi.org/10.1146/annurev.matsci.33.011403.11371810.1146/annurev.matsci.33.011403.113718 ↗
2. V.L. Wiesner, D. Scales, N.S. Johnson, B.J. Harder, A. Garg, and N.P. Bansal, Calcium–Magnesium Aluminosilicate (CMAS) Interactions with Ytterbium Silicate Environmental Barrier Coating Material at Elevated Temperatures, Ceram. Int., 2020, 46, p 16733–16742. https://doi.org/10.1016/j.ceramint.2020.03.24910.1016/j.ceramint.2020.03.249 ↗
3. A. Lynam, A.R. Romero, B. Zhang, S. Lokachari, F. Xu, G.J. Brewster, G. Pattinson, and T. Hussain, Abradable Ytterbium Disilicate Environmental Barrier Coatings: A Story of CMAS and Combined CMAS-Erosion Performance, Surf. Coat. Technol., 2024 https://doi.org/10.1016/j.surfcoat.2024.13150210.1016/j.surfcoat.2024.131502 ↗
4. D. Tejero-Martin, C. Bennett, and T. Hussain, A Review on Environmental Barrier Coatings: History, Current State of the Art and Future Developments, n.d.
5. E.J. Opila, Oxidation and Volatilization of Silica Formers in Water Vapor, J. Am. Ceram. Soc., 2003, 86, p 1238–1248. https://doi.org/10.1111/j.1151-2916.2003.tb03459.x10.1111/j.1151-2916.2003.tb03459.x ↗
6. A. Nieto, R. Agrawal, L. Bravo, C. Hofmeister-Mock, M. Pepi, and A. Ghoshal, Calcia–Magnesia–Alumina–Silicate (CMAS) Attack Mechanisms and Roadmap Towards Sandphobic Thermal and Environmental Barrier Coatings, Int. Mater. Rev., 2021, 66, p 451–492. https://doi.org/10.1080/09506608.2020.182441410.1080/09506608.2020.1824414 ↗
7. 4.4.2-2a Coatings for Superalloy Components, 1998. www.asminternational.org
8. S.R. Choi, R.C. Robinson, K.N. Lee, R.T. Bhatt, and R.A. Miller, Advanced Environmental Barrier Coatings Development for Si-Based Ceramics, 2005. http://www.sti.nasa.gov
9. G. Cao, Y.H. Wang, Z.Y. Ding, Z.G. Liu, J.H. Ouyang, Y.M. Wang, and Y.J. Wang, CMAS Hot Corrosion Behavior of Rare-Earth Silicates for Environmental Barrier Coatings Applications: A Comprehensive Review, Heat Treat. Surf. Eng., 2021, 3, p 9–28. https://doi.org/10.1080/25787616.2021.201938910.1080/25787616.2021.2019389 ↗
10. R. Vaßen, E. Bakan, D. Sebold, and Y.J. Sohn, Correlation of Process Conditions, Porosity Levels and Crystallinity in Atmospherically Plasma Sprayed Yb2Si2O7 Environmental Barrier Coatings, J. Compos. Sci., 2021 https://doi.org/10.3390/jcs508019810.3390/jcs5080198 ↗
11. K. Knipe, A. Manero, S.F. Siddiqui, S. Sofronsky, P. Fouquet, S. Raghavan, C. Meid, J. Wischek, M. Bartsch, J. Okasinski, J. Almer, and A. Karlsson, Synchrotron XRD measurements of thermal barrier coatings subjected to loads representing operational conditions of rotating gas turbine blades, in: 52nd Aerospace Sciences Meeting, American Institute of Aeronautics and Astronautics Inc., 2014: pp. 1–5. https://doi.org/10.2514/6.2014-1157.10.2514/6.2014-1157 ↗
12. F. Briki, J. Vérine, J. Doucet, P. Bénas, B. Fayard, M. Delpech, G. Grateau, and M. Ris-Kautt, Synchrotron x-ray Mcrodiffraction Reveals Intrinsic Structural Features of Amyloid Deposits in Situ, Biophys. J., 2011, 101, p 486–493. https://doi.org/10.1016/j.bpj.2011.05.05510.1016/j.bpj.2011.05.055 ↗
13. P. Chakrabarti, A. Wildeis, M. Hartmann, R. Brandt, R. Döhrmann, G. Fevola, C. Ossig, M.E. Stuckelberger, J. Garrevoet, K.V. Falch, V. Galbierz, G. Falkenberg, and P. Modregger, X-ray Diffraction with Micrometre Spatial Resolution for Highly Absorbing Samples, J. Synchrotron Radiat., 2022, 29, p 1407–1413. https://doi.org/10.1107/S160057752200802510.1107/S1600577522008025 ↗
14. E.B. Owusu, A. Rincón Romero, A. Lynam, B. Zhang, O. Gavalda-Diaz, and T. Hussain, Suspension Plasma Sprayed Ytterbium Disilicate Coatings: Phase Stability and Microstructural Evolution in Extreme Environments, J. Eur. Ceram. Soc., 2024 https://doi.org/10.1016/j.jeurceramsoc.2024.11677910.1016/j.jeurceramsoc.2024.116779 ↗
15. E. Bakan, D. Zhou, D.E. Mack, D. Koch, and R. Vaßen, Plasma Sprayed Duplex Ytterbium Disilicate/Monosilicate EBCs and the Transformation from Ytterbia to Ytterbium Monosilicate During Burner Rig Testing, Corros. Sci., 2024 https://doi.org/10.1016/j.corsci.2024.11217410.1016/j.corsci.2024.112174 ↗
16. S. Lokachari, K. Leng, A. Rincon Romero, N. Curry, G. Brewster, A. Norton, and T. Hussain, Processing-Microstructure-Properties of Columns in Thermal Barrier Coatings: A Study of Thermo-Chemico-Mechanical Durability, ACS Appl. Mater. Interfaces, 2024, 16, p 10646–10660. https://doi.org/10.1021/acsami.3c1668110.1021/acsami.3c16681 ↗
17. R. Vaßen, E. Bakan, C. Gatzen, S. Kim, D.E. Mack, and O. Guillon, Environmental Barrier Coatings Made by Different Thermal Spray Technologies, Coatings, 2019 https://doi.org/10.3390/coatings912078410.3390/coatings9120784 ↗
18. E. Bakan, D. Marcano, D. Zhou, Y.J. Sohn, G. Mauer, and R. Vaßen, Yb2Si2O7 Environmental Barrier Coatings Deposited by Various Thermal Spray Techniques: A Preliminary Comparative Study, J. Therm. Spray Technol., 2017, 26, p 1011–1024. https://doi.org/10.1007/s11666-017-0574-110.1007/s11666-017-0574-1 ↗
19. R. Vaen, H. Kaner, G. Mauer, and D. Stöver,Suspension Plasma Spraying: Process Characteristics and Applications, J. Therm. Spray Technol., 2010, 19, p 219–225. https://doi.org/10.1007/s11666-009-9451-x10.1007/s11666-009-9451-x ↗
20. R. Mcpherson, A review of microstructure and properties of plasma sprayed ceramic coatings, 198910.1016/0257-8972(89)90052-2 ↗
21. A. Hasani, S. Joshi, A. Salminen, S. Goel, J. Reuteler, M.G. Makowska, and A. Ganvir, Localized Phase and Elemental Mapping in Solid-State Lithium Battery LTO Anode Thin-Film Produced by a Novel Suspension Plasma Spray Approach, J. Therm. Spray Technol., 2025, 34, p 1589–1597. https://doi.org/10.1007/s11666-025-02003-610.1007/s11666-025-02003-6 ↗
22. G. Ashiotis, A. Deschildre, Z. Nawaz, J.P. Wright, D. Karkoulis, F.E. Picca, and J. Kieffer, The Fast Azimuthal Integration Python Library: PyFAI, J. Appl. Crystallogr., 2015, 48, p 510–519. https://doi.org/10.1107/S160057671500430610.1107/S1600576715004306 ↗
23. V.A. Solé, E. Papillon, M. Cotte, P. Walter, and J. Susini, A A Multiplatform Code for the Analysis of Energy-Dispersive X-ray Fluorescence Spectra, Spectrochim. Acta B At. Spectrosc., 2007, 62, p 63–68. https://doi.org/10.1016/j.sab.2006.12.00210.1016/j.sab.2006.12.002 ↗
24. D. Tejero-Martin, M. Bai, A. Rincon Romero, R.G. Wellman, and T. Hussain, Steam Degradation of Ytterbium Disilicate Environmental Barrier Coatings: Effect of Composition, Microstructure and Temperature, J. Therm. Spray Technol., 2023, 32, p 29–45. https://doi.org/10.1007/s11666-022-01473-210.1007/s11666-022-01473-2 ↗
25. B.T. Richards, H. Zhao, and H.N.G. Wadley, Structure, Composition, and Defect Control during Plasma Spray Deposition of Ytterbium Silicate Coatings, J. Mater. Sci., 2015, 50, p 7939–7957. https://doi.org/10.1007/s10853-015-9358-510.1007/s10853-015-9358-5 ↗
26. B.T. Richards, K.A. Young, F. De Francqueville, S. Sehr, M.R. Begley, and H.N.G. Wadley, Response of Ytterbium Disilicate-Silicon Environmental Barrier Coatings to Thermal Cycling in Water Vapor, Acta Mater., 2016, 106, p 1–14. https://doi.org/10.1016/j.actamat.2015.12.05310.1016/j.actamat.2015.12.053 ↗
27. E. Garcia, O. Sotelo-Mazon, C.A. Poblano-Salas, G. Trapaga, and S. Sampath, Characterization of Yb2Si2O7–Yb2SiO5 Composite Environmental Barrier Coatings Resultant from in Situ Plasma Spray Processing, Ceram. Int., 2020, 46, p 21328–21335. https://doi.org/10.1016/j.ceramint.2020.05.22810.1016/j.ceramint.2020.05.228 ↗
28. D. Tejero-Martin, A.R. Romero, R.G. Wellman, and T. Hussain, Interaction of CMAS on Thermal Sprayed Ytterbium Disilicate Environmental Barrier Coatings: A Story of Porosity, Ceram. Int., 2022, 48, p 8286–8296. https://doi.org/10.1016/j.ceramint.2021.12.03310.1016/j.ceramint.2021.12.033 ↗
29. J.L. Stokes, M.J. Presby, R.I. Webster, J. Setlock, and B.J. Harder, Thermochemical/thermomechanical synergies in high-temperature solid particle erosion of cmas-exposed ebcs, n.d
30. J.L. Stokes, B.J. Harder, V.L. Wiesner, and D.E. Wolfe, Mechanisms of Apatite Formation in Reactions of Yb 2-2x Gd 2x Si 2 O 7 With CMAS, 2024. http://www.sti.nasa.gov