journal article·2004-03

Improved oxidation life of segmented plasma sprayed 8YSZ thermal barrier coatings

James L. Smialek

Publisher page

Abstract

Abstract Somewhat unconventional plasma sprayed TBC systems were produced and evaluated by interrupted or cyclic furnace oxidation life testing. Approximately 250 µm thick 8YSZ coatings were directly sprayed onto grit blasted surfaces of PWA 1484, without a bond coat, in order to take advantage of the excellent oxidation resistance of this superalloy. For nominal sulfur contents of 1 ppmw, total coating separation took place at relatively short times (200 hr at 1100oC). Reductions in the sulfur content, by melt desulfurization commercially (0.3 ppmw) or by hydrogen annealing in the lab (0.01 ppmw), improved scale adhesion and extended life appreciably, by factors of 5-10. However, edge-initiated failure persisted, producing massive delamination as one sheet of coating. To subvert this mechanism, samples surfaces of melt desulfurized PWA 1484 were EDM’ed with a grid of grooves or ribs (~250 µm wide and high), resulting in a segmented TBC surface macrostructure. Now failure only occurred as independent single segments events. For grooved samples, 1100 C segment life was extended to ~1000 hr for 5 mm wide segments, with no failure observed out to 2000 hr for segments ≤ 2.5 mm wide. Ribbed samples were even more durable, and segments ≤ 6 mm remained intact for 2000 hr. Larger segments failed by buckling at times inversely related to the segment width and decreased by oxidative effects at higher temperatures. This critical buckling size was consistent with that predicted for elastic buckling of a TBC plate subject to thermal expansion mismatch stresses. Thus, low sulfur substrates demonstrate appreciable coating lives without a bond coat, while rib segmenting extends life considerably.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. R.A. Miller and J.K. Doychak: “Plasma Sprayed Ceramic Thermal Barrier Coating for NiAl-based Intermetallic Alloys,” US Patent 5,302,465, April 12, 1994.
2. J.C. Schaeffer, W.H. Murphy, W.B. Connor, B.A. Nagaraj, and H.B. Vakil: “Thermal Barrier Coating System Having No Bond Coat,” US Patent 5,538,796, July 23, 1996.
3. A.M. Freborg, B.L. Ferguson, W.J. Brindley, and G.J. Petrus: “Modeling Oxidation Induced Stresses in Thermal Barrier Coatings,” Mater. Sci. Eng., 1998, A245, pp. 182–90.10.1016/S0921-5093(97)00849-6 ↗
4. M.Y. He, A.G. Evans, and J.W. Hutchinson: “The Ratcheting of Compressed Thermally Grown Thin Films on Ductile Substrates,” Acta Mater., 2000, 48, pp. 2593–601.10.1016/S1359-6454(00)00053-7 ↗
5. G.H. Meier, F.S. Pettit, and J.L. Smialek: “The Effects of Reactive Element Additions and Sulfur Removal on the Adherence of Alumina to Ni- and Fe-Base Alloys,” Werkstoffe Korrosion, 1995, 46, pp. 232–40.10.1002/maco.19950460407 ↗
6. J.L. Smialek: “Maintaining Adhesion of Protective Al2O3 Scales,” JOM, 2000, 52(1), pp. 22–26.10.1007/s11837-000-0110-4 ↗
7. J.L. Smialek: “Advances in the Oxidation Resistance of High-Temperature Turbine Materials,” Surf. Interface Anal., 2001, 31, pp. 582–92.10.1002/sia.1085 ↗
8. J.L. Smialek: “Toward Optimum Scale and TBC Adhesion on Single Crystal Superalloys” in High Temperature Corrosion and Materials Chemistry, 98–9, E.J. Opila, P.Y. Hou, D. Shores, M. McNallan, and R. Oltra, ed., The Electrochemical Society, Pennington, NJ, 1998, pp. 211–20.
9. J.L. Smialek and B.A. Pint: “Optimizing Scale Adhesion for Single Crystal Superalloys,” Mater. Sci. Forum, 2001, 369–372, pp. 459–66.10.4028/www.scientific.net/MSF.369-372.459 ↗
10. J.L. Smialek and G.N. Morscher: “Delayed Alumina Scale Spallation on Rene’N5: Moisture Effects and Acoustic Emission,” Mater. Sci. Eng. A. 2002, 332(1–2), pp. 11–24.10.1016/S0921-5093(01)01712-9 ↗
11. J.A. Haynes, B.A. Pint, K.L. Moore, I.G. Wright, and J.L. Smialek: “Superalloy Substrate Influences on the Oxidation Behavior of Aluminide Bond Coatings” in John Stringer Symposium on High Temperature Corrosion, P.F. Tortorelli, I.G. Wright, and P.Y. Hou, ed., ASM International, Materials Park, OH, 2002, in press.
12. I.G. Wright, B.A. Pint, W.Y. Lee, K.B. Alexander, and K. Prüßner: “Some Effects of Metallic Substrate Composition on Degradation of Thermal Barrier Coatings” in High Temperature Surface Engineering, Book 693, J. Nicholls and D. Rickerby, ed., Institute of Materials, London, UK, 2000, pp. 95–113.
13. W.Y. Lee, Y. Zhang, I.G. Wright, B.A. Pint, and P.K. Liaw: “Effect of Sulfur Impurity on the Scale Adhesion Behavior of a Desulfurized Ni-based Superalloy Aluminized by Chemical Vapor Deposition,” Metall. Trans., 29A, pp. 833–41 (1998).10.1007/s11661-998-0274-z ↗
14. B.A. Pint, I.G. Wright, W.Y. Lee, Y. Zhang, K. Prüßner, and K.B. Alexander: “Substrate and Bond Coat Compositions: Factors Affecting Alumina Scale Adhesion,” Mater. Sci. Eng., 1998, A245, pp. 201–11.10.1016/S0921-5093(97)00851-4 ↗
15. J.L. Smialek: “Scale Adhesion, Sulfur Content, and TBC Failure on Single Crystal Superalloys,” Ceram. Eng. Sci. Proc., 2002, 23(4), pp. 485–95.10.1002/9780470294758.ch54 ↗
16. J.L. Smialek, “Segmented Thermal Barrier Coating,” U.S. Patent 6,316,078, Nov. 13, 2001.
17. X. Peng and D.R. Clarke: “Piezospectroscopic Analysis of Interface Debonding in Thermal Barrier Coatings,” J. Am. Ceram. Soc., 2000, 83(5), pp. 1165–70.10.1111/j.1151-2916.2000.tb01349.x ↗
18. V. Sergo and D.R. Clarke: “Observation of Subcritical Spall Propagation of a Thermal Barrier Coating,” J. Am. Ceram. Soc., 1998, 81(12), pp. 3237–42.10.1111/j.1151-2916.1998.tb02761.x ↗
19. R. Janakiraman, G.H. Meier, and F.S. Pettit: “The Effect of Water Vapor on the Oxidation of Alloys that Develop Alumina Scales for Protection” in Cyclic Oxidation of High Temperature Materials, M. Schutze and W.J. Quadakkers, ed., European Federation of Corrosion, Institute of Materials, London, UK, 1999, pp. 38–62.
20. J.K. Tien and J.M. Davidson: “Oxide Spallation Mechanisms” in Stress Effects and the Oxidation of Metals, J.V. Cathcart, ed., AIME, New York, 1975, pp. 200–19.
21. D. Zhu, L.J. Ghosn, and R.A. Miller: “Effect of Layer-Graded Bond Coats on Edge Stress Concentration and Oxidation Behavior of Thermal Barrier Coatings” in High Temperature Materials Chemistry, 98–9, P.Y. Hou, M.J. McNallan, R. Oltra, E.J. Opila, ed., Electrochemical Society, Pennington, NJ, 1998, pp. 170–89 (also NASA TM 1998-208505, Washington, DC, 1998).
22. K. Kokini, A. Banerjee, and T.A. Taylor: “Thermal Fracture of Interfaces in Precracked Thermal Barrier Coatings,” Mater. Sci. Eng., 2002, A323, pp. 70–82.10.1016/S0921-5093(01)01361-2 ↗
23. H.E. Evans, G.P. Mitchell, R.C. Lobb, and D.R.J. Owen: “A Numerical Analysis of Oxide Spallation,” Proc. R. Soc. London, 1993, 440A, pp. 1–22.10.1098/rspa.1993.0001 ↗
24. M.D. Thouless: “Combined Spalling and Cracking of Films,” J. Am. Ceram. Soc., 1993, 76, pp. 2936–38.10.1111/j.1151-2916.1993.tb04044.x ↗