Effects of Substrate Roughness on Splat Formation for Ni-Cr Particles Plasma Sprayed onto Aluminum Substrates
Source abstract
Abstract
Roughening of the substrate, for instance by grit-blasting or etching, is often used before plasma spraying in order to provide a high degree of roughness that promotes mechanical interlocking of the sprayed coating and consequently improved adhesion. This study investigates the morphology and microstructure of NiCr splats formed on such rough Al substrates, where roughness was generated by a number of methods including grinding and etching. Cross sections of the splats and the splat-substrate interface were examined using a range of electron microscopy techniques. Localized substrate melting and chemical mixing with the splat material was observed, forming very particular structures. The formation of various oxides phases and voids was also noted and found to increase, along with the degree of the substrate melting, with increasing substrate roughness. The structures observed were related to the spray conditions and substrate morphology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. M. Dorfman, Thermal Spray Basics, Adv. Mater. Process., 2002, 160(7), p 47-50
2. R.F. Bunshah, Handbook of Hard Coatings. Deposition Technologies, Properties and Applications, Noyes Publications, William Andrew Publishing, Norwich, NY, 2001
3. M. Dorfman, Thermal Spray Processes, Adv. Mater. Process., 2002, 160(8), p 47-49
4. S. Kitahara and A. Hasui, A Study of the Bonding Mechanism of Sprayed Coatings, J. Vac. Sci. Technol., 1974, 11(4), p 747-75310.1116/1.1312746 ↗
5. S. Brossard, P.R. Munroe, A.T.T. Tran, and M.M. Hyland, Study of the Microstructure of NiCr Splats Plasma Sprayed on Stainless Steel by TEM, Surf. Coat. Technol., 2009, 204(9-10), p 1608-161510.1016/j.surfcoat.2009.10.007 ↗
6. H. Zhang, X.Y. Wang, L.L. Zheng, and X.Y. Jiang, Studies of Splat Morphology and Rapid Solidification During Thermal Spraying, Int. J. Heat Mass Trans., 2001, 44, p 4579-459210.1016/S0017-9310(01)00109-0 ↗
7. L. Li, X.Y. Wang, G. Wei, A. Vaidya, H. Zhang, and S. Sampath, Substrate Melting During Thermal Splat Quenching, Thin Solid Films, 2004, 468, p 113-11910.1016/j.tsf.2004.05.073 ↗
8. S. Brossard, P.R. Munroe, A.T.T. Tran, and M.M. Hyland, Examination of the Splat Microstructure, Splat-Substrate Interface and the Effects of Substrate Heating on the Splat Formation for Ni-Cr Particles Plasma Sprayed onto Aluminum Substrates, Submitted to J. Therm. Spray Technol., 2010. doi: 10.1007/s11666-010-9511-210.1007/s11666-010-9511-2 ↗
9. V. Pershin, M. Lufitha, S. Chandra, and J. Mostaghimi, Effect of Substrate Temperature on Adhesion Strength of Plasma-Sprayed Nickel Coatings, J. Therm. Spray Technol., 2003, 12(3), p 370-37610.1361/105996303770348249 ↗
10. S. Brossard, P.R. Munroe, and M.M. Hyland, Study of the Splat Formation for HVOF Sprayed NiCr on Stainless Steel Substrates and the Effects of Heating and Boiling Pre-treatments, J. Therm. Spray Technol., in publication, 2010. doi: 10.1007/s11666-010-9502-310.1007/s11666-010-9502-3 ↗
11. S. Brossard, P.R. Munroe, A.T.T. Tran, and M.M. Hyland, Study of the Effects of Surface Chemistry on Splat Formation for Plasma Sprayed NiCr onto Stainless Steel Substrates, Surf. Coat. Technol., 2009, 204(9-10), p 1599-160710.1016/j.surfcoat.2009.10.008 ↗
12. H.-D. Steffens, B. Wielage, and J. Drozak, Interface Phenomena and Bonding Mechanism of Thermally-Sprayed Metal and Ceramic Composites, Surf. Coat. Technol., 1991, 45, p 299-30810.1016/0257-8972(91)90236-P ↗
13. T. Chraska and A.H. King, Effect of Different Substrate Conditions Upon Interface with Plasma Sprayed Zirconie—A TEM Study, Surf. Coat. Technol., 2002, 157, p 238-24610.1016/S0257-8972(02)00181-0 ↗
14. P. Fauchais, M. Fukumoto, A. Vardelle, and M. Vardelle, Knowledge Concerning Splat Formation: An Invited Review, J. Therm. Spray Technol., 2004, 13(3), p 337-36010.1361/10599630419670 ↗
15. Z.G. Feng, M. Domaszewski, G. Montavon, and C. Coddet, Finite Element Analysis of Effect of Substrate Surface Roughness on Liquid Droplet Impact and Flattening Process, J. Therm. Spray Technol., 2002, 11(1), p 62-6810.1361/105996302770348989 ↗
16. C. Moreau, P. Gougeon, and M. Lamontagne, Influence of Substrate Preparation on the Flattening and Cooling of Plasma-Sprayed Particles, J. Therm. Spray Technol., 1995, 4(1), p 25-3310.1007/BF02648525 ↗
17. J. Cedelle, M. Vardelle, B. Pateyron, and P. Fauchais, Investigation of Plasma Sprayed Coatings Formation by Visualization of Droplet Impact and Splashing on a Smooth Substrate, Trans. Plasm. Sci., 2005, 33(2), p 414-41510.1109/TPS.2005.845121 ↗
18. M. Raessi, J. Mostaghimi, and M. Bussmann, Effect of Surface Roughness on Splat Shapes in the Plasma Coating Process, Thin Solid Films, 2006, 506-507, p 133-13510.1016/j.tsf.2005.08.140 ↗
19. L. Bianchi, A.C. Leger, M. Vardelle, A. Vardelle, and P. Fauchais, Splat Formation and Cooling of Plasma-Sprayed Zirconia, Thin Solid Films, 1997, 305, p 35-4710.1016/S0040-6090(97)80005-3 ↗
20. H. Liu, E.J. Lavernia, and R.H. Rangel, Modeling of Molten Droplet Impingement on Non-Flat Surface, Acta Met. Mater., 1995, 43(5), p 2053-207210.1016/0956-7151(94)00386-V ↗
21. M. Ivosevic, V. Gupta, J.A. Baldoni, R.A. Cairncross, T.E. Twardowski, and R. Knight, Effect of Substrate Roughness on Splatting Behavior of HVOF Sprayed Polymer Particles: Modelling and Experiments, J. Therm. Spray Technol., 2006, 15(4), p 725-73010.1361/105996306X146839 ↗
22. N. Ferguen, P. Fauchais, A. Vardelle, and D. Gobin, Numerical Investigation of Impact and Solidification of YSZ Droplets Plasma-Sprayed onto a Substrate: Effect of Thermal Properties and Roughness, 32nd International Conference on Advanced Ceramics and Composites, H.-T. Lin and D. Zhu, Ed., January 27-February 1 (Daytona Beach, Florida, USA), The American Ceramic Society, p 159-17010.1002/9780470456323.ch14 ↗
23. M. Qu and A. Gouldstone, On the role of bubbles in metallic splat nanopores and adhesion, J. Therm. Spray Technol., 2008, 17(4), p 486-49410.1007/s11666-008-9198-9 ↗
24. M. Xue, S. Chandra, and J. Mostaghimi, Investigation of Splat Curling Up in Thermal Spray Coatings, J. Therm. Spray Technol., 2006, 15(4), p 531-53610.1361/105996306X147315 ↗
25. M. Xue, S. Chandra, J. Mostaghimi, and H.R. Salimijazi, Formation of Pores in Thermal Spray Coatings Due to Incomplete Filling of Crevices in Patterned Surfaces, Plasma. Chem. Plasma Process., 2007, 27(5), p 647-65710.1007/s11090-007-9097-8 ↗
26. H.B. Parizi, L. Rosenzweig, J. Mostaghimi, S. Chandra, T. Coyle, H. Salimi, L. Pershin, A. McDonald, and C. Moreau, Numerical Simulation of Droplet Impact on Patterned Surfaces, J. Therm. Spray Technol., 2007, 16(5-6), p 713-72110.1007/s11666-007-9122-8 ↗
27. D.E. Wroblewski, R. Khare, and M. Gevelber, Solidification Modeling Plasma Sprayed TBC: Analysis of Remelt and Multiple Length Scales of Rough Substrates, J. Therm. Spray Technol., 2002, 11(2), p 266-27510.1361/105996302770348934 ↗
28. S.N. Basu, G. Ye, R. Khare, B. McCandless, M. Gevelber, and D.E. Wroblewski, Dependence of Splat Remelt and Stress Evolution on Surface Roughness Length Scales in Plasma Sprayed Thermal Barrier Coatings, Int. J. Refract. Met. Hard Mater., 2009, 27, p 479-48410.1016/j.ijrmhm.2008.11.012 ↗
29. MatWeb, Material Property Data, 2008, 11/11/2008; Available from: http://www.matweb.com/
30. P.R. Munroe, The Application of Focused Ion Beam Microscopy in the Material Sciences, Mater. Charact., 2009, 60, p 2-1310.1016/j.matchar.2008.11.014 ↗
31. S. Brossard, A.T.T. Tran, P.R. Munroe, and M.M. Hyland, Study of the Splat Formation for Plasma Sprayed NiCr on an Al5052 Substrate as a Function of Substrate Condition, Surf. Coat. Technol., 2010. doi: 10.1016/j.surfcoat.2010.02.01310.1016/j.surfcoat.2010.02.013 ↗
32. C.S. Giggins and F.S. Pettit, Oxidation of Ni-Cr-Al Alloys Between 1000 and 1200 °C, J. Electrochem. Soc., 1971, 118(11), p 1782-179010.1149/1.2407837 ↗
33. M. Fukumoto, M. Shiiba, H. Kaji, and T. Yasui, Three-Dimensional Transition Map of Flattening Behavior in the Thermal Spray Process, Pure Appl. Chem., 2005, 77(2), p 429-44210.1351/pac200577020429 ↗
34. X.Y. Jiang, Y. Wan, H. Herman, and S. Sampath, Role of Condensate and Adsorbates on Substrate Surface on Fragmentation of Impinging Molten Droplets During Thermal Spray, Thin Solid Films, 2001, 385, p 132-14110.1016/S0040-6090(01)00769-6 ↗
35. C.-L. Li and J.-L. Li, Evaporated-Gas-Induced Splashing Model for Splat Formation During Plasma Spraying, Surf. Coat. Technol., 2004, 184, p 13-2310.1016/j.surfcoat.2003.10.048 ↗
36. A.T.T. Tran and M.M. Hyland, The Role of Substrate Surface Chemistry on Splat Formation During Plasma Spray Deposition by Experiments and Simulations, J. Therm. Spray Technol., 2010, 19(1-2), p 11-2310.1007/s11666-009-9414-2 ↗
37. S. Goutier, M. Vardelle, J.C. Labbe, and P. Fauchais, Alumina Splat Investigation: Visualization of Impact And Splat/Substrate Interface for Millimetre Sized Drops, J. Therm. Spray Technol., 2010, 19(1-2), p 49-5510.1007/s11666-009-9432-0 ↗
38. H. Beck and H.-J. Güntherodt, Glassy Metals, Springer-Verlag, Berlin, 198310.1007/3-540-12787-9 ↗
39. S. Brossard, A.T.T. Tran, P.R. Munroe, and M.M. Hyland, Study of the Splat Formation for Plasma Sprayed NiCr on Aluminum Substrate as a Function of Substrate Condition, Surf. Coat. Technol., 2010, 204(16-17), p 2647-265610.1016/j.surfcoat.2010.02.013 ↗