journal article·2007-12

Quality Considerations for the Evaluation of Thermal Spray Coatings

Jan Wigren, Kristina Täng

Publisher page

Abstract

Revealing the true structural and mechanical properties is of utmost importance for the optimized use of thermal sprayed coatings. Only the true properties can be expected to correlate to the spray parameters. During the recent decade, the gas turbine industry has experienced a focus on the laboratory procedures being the weakest link in a frozen and robust process. This article will show several results indicating that the laboratory procedures are more essential to the evaluation results than the spray parameters themselves. With new and robust laboratory techniques, the true properties of thermal spray coatings are revealed, causing a major problem with respect to the quality standards developed 30-40 years ago. In many cases, these old specifications need updates, which is a difficult task from a cost, time, and quality perspective for OEM’s. Coatings that have been successfully used for almost half a century no longer conform to the specification they were optimized to, because of these new appropriate laboratory techniques and procedures. What is actually meant when stating the following? (1) The coating has 5% porosity; (2) No cracks are allowed; (3) Tensile bond is 50 Mpa; (4) Hardness is 1000 HV; and (5) Coating thickness is 100 μm. This article also initiates a discussion on the measurement inaccuracies, for testing of thermally sprayed coatings, with respect to the commonly used general international standards (such as QS9000, ISO17025, AS9003, and ISO10012), as well as with respect to recommendations from the Six Sigma methodology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Tribology and Wear Analysis · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. J. Wigren and K. Täng, Some Considerations for the Routine Testing of Thermal Sprayed Coatings, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Ed. (Singapore), ASM International, May 28-30, 2001, 1381 p10.31399/asm.cp.itsc2001p1221 ↗
2. Quality System Requirements, QS9000, 3rd ed., 1998
3. Measurement Systems Analysis, 3rd ed., published in March 2002 as part of QS9000
4. General Requirements for the Competence of Testing and Calibration Laboratories, ISO17025, 2nd ed., 2005
5. Inspection and Test Quality System, AS9003, 2001
6. Measurement Management Systems – Requirements for Measurement Processes and Measuring Equipment – ISO10012: 2003
7. Volvo Operational Management System, Internal requirements
8. J.P. Sauer, T. Leonhardt, and A.R. Geary, The Effect of Mounting Technique on the Microstructure of Thermal Barrier Coatings, Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, Ed. (Indianapolis, IN), ASM International, Sept 15-18, 1997, p 959-96410.31399/asm.cp.itsc1997p0959 ↗
9. J. Wigren and L. Pejryd, Thermal Barrier Coatings – Why, How, Where and Where to, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed. (Nice, France), ASM International, May 25-29, 1998, p 1531-154210.31399/asm.cp.itsc1998p1531 ↗
10. M. Ruckert, J. Wigren, and K.W. Couch, How to Define the True Structure of 88/12 WC/Co and How to Find the Correct Preparation Method, presented at NTSC’ 88 (Cincinatti) during workshop, 1988
11. J. Wigren, L. Pejryd, P. Gougeon, and C. Moreau, Effect of In-Flight Particle Properties on the Properties of Plasma Sprayed NiCrAlY & NiCoCrAlY, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed. (Nice, France), ASM International, May 25-29, 1998, p 785-79010.31399/asm.cp.itsc1998p0785 ↗
12. A.-C. Leger, J. Wigren, M.-O. Hansson, Development of a Process Window for a NiCoCrAlY Plasma Sprayed Coating, Surf. Coat. Technol. 1998, 108-109: 86-9210.1016/S0257-8972(98)00615-X ↗
13. P. Brännvall, Smearing of HVOF-Sprayed WC/Co Coating Using SiC-Paper for Metallographic Preparation, Internal Report Volvo Aero Corporation. Volvo LR 9940-443, 1998
14. Standard Test Method for Adhesion or Cohesive Strength of Thermal Spray Coatings, ASTM C633-2001
15. C. Berndt, Tensile Adhesion Testing Methodology for Thermally Sprayed Coatings, J. Mater. Eng. 1990, 12: 151-15810.1007/BF02834068 ↗
16. D.J. Greving, J.R. Shadley, and E.F. Rybicki, Effects of Coating Thickness and Residual Stresses on Bond Strength of C633-79 Thermal Spray Coating Test Specimens, Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, Ed. (Boston, MA), ASM International, June 20-24, 1994, p 639-64510.1007/BF02658982 ↗
17. K. Evans, Tensile Bond Strength Variance of Thermally Sprayed Coating with Respect to Adhesive Type, Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, Ed. (Cincinnati, OH), ASM International, Oct 7-11, 1996, p 803-81110.31399/asm.cp.itsc1996p0803 ↗
18. Standard Test Method for Microindentation Hardness of Materials, ASTM E-384 Rev A, 2005
19. Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials, ASTM E-18, 2005