Controlling the Twin Wire Arc Spray Process Using Artificial Neural Networks (ANN)
Source abstract
Abstract
Abstract One approach for controlling the twin wire arc spray (TWAS) process is to use optical properties of the particle beam like length or brightness of the beam as input parameters for a process control. The idea is that changes in the process like eroded contact nozzles or variations of current, voltage and/or atomizing gas pressure can be detected through observation of optical properties of the particle beam. It can be assumed that if these properties deviate significantly from those obtained from a beam recorded for an optimal coating process the spray particle and so the coating properties change significantly. Thus, the goal is to detect these optical deviations and compensate occurring errors by adjusting appropriate process parameters for the wire arc spray unit. One cost effective method for monitoring optical properties of the particle beam is to apply the process diagnostic system PFI (Particle Flux Imaging): PFI fits an ellipse to an image of a particle beam thereby defining easy to analyze characteristic parameters by relating optical beam properties to ellipse parameters. Using artificial neural networks (ANN) mathematical relations between ellipse and process parameters can be defined. Thus in the case of a process disturbance through the use of an ANN-based control new process parameters can be computed to compensate particle beam deviations. In this paper, it will be shown that different process parameters can lead to particle beams with the same PFI parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor Technologies Research · Laser-induced spectroscopy and plasma · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, Wiley, Chichester, UK, 1995
2. F.-W. Bach, A. Laarmann, and T. Wenz, Ed., Modern Surface Technology, Wiley, Weinheim, Germany, 2006
3. E. Lugscheider, F. Ernst, K. Seemann, T. Pfeifer, J. Dören, and J. Zierhut, Quality Control of Thermal Spray Processes Through Cost Effective Diagnostic Methods, Thermal Spray 2005: Thermal Spray Connects: Explore its Surfacing Potential Basel, E. Lugscheider, Ed., Switzerland, DVS-ASM, 2005, p 1534-1539
4. A. Jakimov, M. Hertter, and H. Abdullahi, Plasma Spray Process Control with Neural Network, Thermal Spray 2005: Thermal Spray Connects: Explore its Surfacing Potential, E. Lugscheider, Ed., DVS-ASM, Basel, Switzerland, 2005, p 673-678
5. A.-F. Kanta, G. Montavon, M.-P. Planche, and C. Coddet, Artificial Intelligence Computation to Establish Relationships Between APS Process Parameters and Alumina-Titania Coating Properties, Plasma Chem. Plasma Process., 2008, 28(2), p 249-26210.1007/s11090-007-9116-9 ↗
6. T.A. Choudhury, N. Hosseinzadeh, and C.C. Berndt, Artificial Neural Network Application for Predicting In-Flight Particle Characteristics of an Atmospheric Plasma Spray Process, Surf. Coat. Technol., 2011, 205(21-22), p 4886-489510.1016/j.surfcoat.2011.04.099 ↗
7. R.B. Heimann, Better Quality Control: Stochastic Approaches to Optimize Properties and Performance of Plasma-Sprayed Coatings, J. Therm. Spray Technol., 2010, 19(4), p 765-77810.1007/s11666-009-9385-3 ↗
8. K. Hartz-Behrend, J. Schein, D.P. Jonke, M. Englhart, and J. Zierhut, Control of Wire Arc Spraying Using Artificial Neural Networks for the Production of Thin-Walled Moulds for Carbon Fiber Reinforced Plastics, Thermal Spray 2012: Air, Land, Water and the Human Body: Thermal Spray Science and Applications, R.S. Lima, A. Agarwal, M.M. Hyland, Y.-C. Lau, C.-J. Li, A. McDonald, and F.-L. Toma, Ed., ASM International, Houston, Texas, 2012, p 436-441
9. A. Khudhair, N.A. Talib, Neural Network Analysis for Sliding Wear of 13% Cr Steel Coatings by Electric Arc Spraying, First Engineering Scientific Conference, College of Engineering—University of Diyala, Diyala Journal of Engineering Sciences, 22-23 December, 2010, p 157-169
10. Y. Korobov, S. Nevezhin, V. Verkhorubov, G. Rimer, A. Zhilin, Optimization of Alloying of Heat Resistant Core Wires for Arc Spraying by Neural Network Modeling. Thermal Process Modeling: Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, B.L. Ferguson, R. Goldstein, R. Papp, Ed., June 16-18, (Orlando, Florida), ASM International, 2014, p 323-328
11. K.D. Landes, T.V. Streibl, J. Zierhut, Particle Flux Imaging (PFI) and Particle Shape Imaging (PSI)—Two Innovative Diagnostics for Thermal Coating. International Thermal Spray Conference, E. Lugscheider and C.C. Berndt, Ed., March 4-6, (Essen, Germany), DVS Deutscher Verband für Schweißen, 2002, p 47-5110.31399/asm.cp.itsc2002p0047 ↗
12. J. Zierhut, W. Pellkofer, A. Sagel, T. Haug, and K.D. Landes, Verification of Particle Flux Imaging (PFI) an In-Situ Diagnostic Method, Thermal Spray 2001 New Surfaces for a New Millennium, 28-30, C.C. Berndt, Ed., ASM International, Singapore, 2001, p 787-790
13. J. Zierhut, K.D. Landes, W. Krömmer, and P. Heinrich, Particle Flux Imaging (PFI) In-Situ Diagnostics for Thermal Coating Process, Thermal Spray: Surface Engineering via Applied Research, May 8-11, 2000, C.C. Berndt, Ed., ASM International, Montréal, Québec, 2000, p 63-66
14. M. McCord Nelson and W.T. Illingworth, A Practical Guide to Neural Nets, Addison Wesley, New York, 1991