journal article·2016-08

Nozzle Mounting Method Optimization Based on Robot Kinematic Analysis

Chaoyue Chen, Hanlin Liao, Ghislain Montavon, Sihao Deng

Publisher page

Abstract

Nowadays, the application of industrial robots in thermal spray is gaining more and more importance. A desired coating quality depends on factors such as a balanced robot performance, a uniform scanning trajectory and stable parameters (e.g. nozzle speed, scanning step, spray angle, standoff distance). These factors also affect the mass and heat transfer as well as the coating formation. Thus, the kinematic optimization of all these aspects plays a key role in order to obtain an optimal coating quality. In this study, the robot performance was optimized from the aspect of nozzle mounting on the robot. An optimized nozzle mounting for a type F4 nozzle was designed, based on the conventional mounting method from the point of view of robot kinematics validated on a virtual robot. Robot kinematic parameters were obtained from the simulation by offline programming software and analyzed by statistical methods. The energy consumptions of different nozzle mounting methods were also compared. The results showed that it was possible to reasonably assign the amount of robot motion to each axis during the process, so achieving a constant nozzle speed. Thus, it is possible optimize robot performance and to economize robot energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Particle Dynamics in Fluid Flows · High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, Wiley, Chichester, 200810.1002/9780470754085 ↗
2. S. Deng, Z. Cai, D. Fang, H. Liao, and G. Montavon, Application of Robot Offline Programming in Thermal Spraying, Surf. Coat. Technol., 2012, 206(19-20), p 3875-388210.1016/j.surfcoat.2012.03.038 ↗
3. T. Vivekanandhan, A. Kashani, and R. Echempati, Computer-Aided Torch Trajectory Generation for Automated Coating of Parts with Complex Surfaces, J. Therm. Spray Technol., 1994, 3(2), p 208-21510.1007/BF02648281 ↗
4. Z. Cai, S. Deng, H. Liao, C. Zeng, and G. Montavon, The Effect of Spray Distance and Scanning Step on the Coating Thickness Uniformity in Cold Spray Process, J. Therm. Spray Technol., 2014, 23(3), p 354-36210.1007/s11666-013-0002-0 ↗
5. A. Hansbo and P. Nylén, Models for the Simulation of Spray Deposition and Robot Motion Optimization in Thermal Spraying of Rotating Objects, Surf. Coat. Technol., 1999, 122(2-3), p 191-20110.1016/S0257-8972(99)00255-8 ↗
6. S. Leigh and C. Berndt, Evaluation of Off-Angle Thermal Spray, Surf. Coat. Technol., 1997, 89(3), p 213-22410.1016/S0257-8972(96)02897-6 ↗
7. A. Kout and H. Müller, Parameter Optimization for Spray Coating, Adv. Eng. Softw., 2009, 40(10), p 1078-108610.1016/j.advengsoft.2009.03.001 ↗
8. T. Chettibi, H. Lehtihet, M. Haddad, and S. Hanchi, Minimum Cost Trajectory Planning for Industrial Robots, Eur. J. Mech. A Solid, 2004, 23(4), p 703-71510.1016/j.euromechsol.2004.02.006 ↗
9. O. Stier, Fundamental Cost Analysis of Cold Spray, J. Therm. Spray Technol., 2014, 23(1-2), p 131-13910.1007/s11666-013-9972-1 ↗
10. W. Wong, E. Irissou, A. Ryabinin, J.-G. Legoux, and S. Yue, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2011, 20(1-2), p 213-22610.1007/s11666-010-9568-y ↗
11. M. Fasching, F. Prinz, and L. Weiss, Planning Robotic Trajectories for Thermal Spray Shape Deposition, J. Therm. Spray Technol., 1993, 2(1), p 45-5710.1007/BF02647423 ↗
12. S. Deng, H. Liang, Z. Cai, H. Liao, and G. Montavon, Kinematic Optimization of Robot Trajectories for Thermal Spray Coating Application, J. Therm. Spray Technol., 2014, 23(8), p 1382-138910.1007/s11666-014-0137-7 ↗
13. S. Deng, D. Fang, Z. Cai, H. Liao, and G. Montavon, Application of External Axis in Robot-Assisted Thermal Spraying, J. Therm. Spray Technol., 2012, 21(6), p 1203-121510.1007/s11666-012-9818-2 ↗
14. N. Cinca, A. List, F. Gärtner, J.M. Guilemany, and T. Klassen, Influence of Spraying Parameters on Cold Gas Spraying of Iron Aluminide Intermetallics, Surf. Coat. Technol., 2015, 268, p 99-10710.1016/j.surfcoat.2014.07.070 ↗
15. M. Fukumoto, H. Wada, K. Tanabe, M. Yamada, E. Yamaguchi, A. Niwa, M. Sugimoto, and M. Izawa, Effect of Substrate Temperature on Deposition Behavior of Copper Particles on Substrate Surfaces in the Cold Spray Process, J. Therm. Spray Technol., 2007, 16(5-6), p 643-65010.1007/s11666-007-9121-9 ↗
16. J.-G. Legoux, E. Irissou, and C. Moreau, Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings, J. Therm. Spray Technol., 2007, 16(5-6), p 619-62610.1007/s11666-007-9091-y ↗
17. S. Rech, A. Trentin, S. Vezzù, J.-G. Legoux, E. Irissou, and M. Guagliano, Influence of Pre-heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray, J. Therm. Spray Technol., 2011, 20(1-2), p 243-25110.1007/s11666-010-9596-7 ↗
18. D. Fang, S. Deng, H. Liao, and C. Coddet, Automatic Generation of Robot Trajectory for free-Form Surfaces in Thermal Spraying, Thermal Spray 2011: Proceedings of the International Thermal Spray Conference (Hamburg, Germany), 2011, p 1110-111410.31399/asm.cp.itsc2011p1110 ↗
19. S. Deng, Z. Cai, D. Fang, H. Liao, and G. Montavon, Application of Robot Offline Programming in Thermal Spraying, Surf. Coat. Technol., 2012, 206(19), p 3875-388210.1016/j.surfcoat.2012.03.038 ↗
20. S. Deng and C. Chen, Generation of Robot Trajectory for Thermal Spray in Robot Kinematics and Motion Planning, W. Adams, Ed., 2015, Nova Science, New York, p 103
21. R. Gadow, A. Candel, and M. Floristán, Optimized Robot Trajectory Generation for Thermal Spraying Operations and High Quality Coatings on Free-Form Surfaces, Surf. Coat. Technol., 2010, 205(4), p 1074-107910.1016/j.surfcoat.2010.08.121 ↗
22. S. Dong, B. Song, H. Liao, and C. Coddet, Deposition of NiCrBSi Coatings by Atmospheric Plasma Spraying and Dry-Ice Blasting: Microstructure and Wear Resistance, Surf. Coat. Technol., 2015, 268, p 36-4510.1016/j.surfcoat.2014.09.025 ↗