Measurement of the Average Two-Dimensional Surface Temperature Distribution of Drops in a Melt Atomization Process
Source abstract
Abstract
During the production of metal and alloy powders by melt atomization, the knowledge of the surface temperature distribution of drops is essential. This paper shows the application of low-cost industrial CCD-cameras in connection with advanced image processing techniques to measure the average two-dimensional surface temperature distribution of drops in a melt atomization process. These measurements are necessary for comparison with the results of numerical investigations. The two-color pyrometer consists of two standard industrial CCD-cameras with appropriate optical filters. After calibration using a high-temperature furnace, the relative measurement error was smaller than 1.6% within the temperature range of 1273-1873 K. The pyrometer was applied to measure the average temperature distribution during the metal spraying process in a vacuum inert gas atomization facility. The measured temperature distribution averaged over 10 ms shows the development of a hollow cone spray of the atomized metal. The average axial distance between the atomization nozzle and the region of the liquidus temperature was found to be approximately 40 times the diameter of the atomization nozzle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows · Fluid Dynamics and Mixing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. B. Zheng and E.J. Lavernia, Melt Atomization, Handbook of Atomization and Sprays: Theory and Applications, N. Ashgriz, Ed., Springer, New York, 2011, p 837-84810.1007/978-1-4419-7264-4_36 ↗
2. J.R. Fincke, D.C. Haggard, and W.D. Swank, Particle Temperature Measurement in the Thermal Spray Process, J. Therm. Spray Technol., 2001, 10(2), p 255-26610.1361/105996301770349358 ↗
3. P. Fauchais and M. Vardelle, Sensors in Spray Processes, J. Therm. Spray Technol., 2010, 19(4), p 668-69410.1007/s11666-010-9485-0 ↗
4. B. Müller and U. Renz, Development of a Fast Fiber-Optic Two-Color Pyrometer for the Temperature Measurement of Surfaces with Varying Emissivities, Rev. Sci. Instrum., 2001, 72(8), p 3366-337410.1063/1.1384448 ↗
5. G. Mauer, R. Vaßen, and D. Stöver, Plasma and Particle Temperature Measurements in Thermal Spray: Approaches and Applications, J. Therm. Spray Technol., 2011, 20(3), p 391-40610.1007/s11666-010-9603-z ↗
6. A. Vedaldi and B. Fulkerson, VLFeat: An Open and Portable Library of Computer Vision Algorithms, 2008, http://www.vlfeat.org/
7. G. Bradski and A. Kaehler, Learning OpenCV: Computer Vision with the OpenCV Library, O. Reilly Media, 2008, ISBN 978-0-596-51613-0
8. G. Mauer, R. Vaßen, and D. Stöver, Detection of Melting Temperatures and Sources of Errors Using Two-Color Pyrometry During In-flight Measurements of Atmospheric Plasma-Sprayed Particles, Int. J. Thermophys., 2008, 29, p 764-78610.1007/s10765-008-0422-0 ↗
9. H. Chaves, S. Herbst, and C. Skupsch, Measurement of the Particle Velocity in a HVOF Spray with PIV Under Industrial Conditions, J. Therm. Spray Technol., 2012, 21(5), p 882-88610.1007/s11666-012-9772-z ↗
10. T. Dubberstein and H.-P. Heller, Effect of Surface Tension on Gas Atomization of a CrMnNi Steal Alloy, Steel Res. Int., 2013, 84(9), p 845-85110.1002/srin.201200321 ↗
11. N. Zeoli, H. Tabbara, and S. Gu, CFD Modeling of Primary Breakup During Metal Powder Atomization, Chem. Eng. Sci., 2011, 66(24), p 6498-650410.1016/j.ces.2011.09.014 ↗
12. G.S.E. Antipas, Review of Gas Atomization and Spray Forming Phenomenology, Powder Metall., 2013, 56(4), p 317-33010.1179/1743290113Y.0000000057 ↗
13. F. Träger, Ed., Springer Handbook of Lasers and Optics, Springer New York, 2007, ISBN 978-0-387-95579-710.1007/978-0-387-30420-5 ↗
14. R. Gjesing, J. Hattel, and U. Fritsching, Coupled Atomization and Spray Modeling in the Spray Forming Process Using OpenFOAM, Eng. Appl. Comput. Fluid, 2009, 3(4), p 471-486