Effect of Chlorella vulgaris Biofilm Adhesion on Electrochemical Behaviors of Wire Arc-Sprayed Aluminum Coatings
Source abstract
Abstract
Thermal-sprayed aluminum (Al) coatings are widely used for corrosion protection in marine environments. The corrosive nature of seawater and the synergy with marine microbes make for aggressive service environments for Al coatings. In this study, Al coatings were deposited on 316L stainless steel (316L SS) substrates by using wire arc spraying. Chlorella vulgaris, a typical marine fouling algae, was used to investigate the effects of biofilm adhesion on the electrochemical behavior of wire arc-sprayed Al coatings in artificial seawater environment. Electrochemical measurements via dynamic potential polarization curves and electrochemical impedance spectroscopy were used to monitor the corrosion behavior after attachment of microbes on Al coatings and bare, uncoated 316L SS. Analysis of the corrosion products was conducted using scanning electron microscope and energy-dispersive spectrum. The results showed that the Chlorella vulgaris biofilm slowed the corrosion of the Al coatings. This suggested that Chlorella vulgaris biofilm was a critical contributing factor to the corrosion behavior of the Al coatings. Moreover, a mechanism was suggested to illustrate the corrosion behavior of Al coatings in the presence of Chlorella vulgaris.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. C.G. Soares, Y. Garbatov, A. Zayed, and G. Wang, Influence of Environmental Factors on Corrosion of Ship Structures in Marine Atmosphere, Corros. Sci., 2009, 51(9), p 2014-202610.1016/j.corsci.2009.05.028 ↗
2. H.Q. Yang, Z.J. Yao, D.B. Wei, W.B. Zhou, G.X. Yin, and L.X. Feng, Anticorrosion of Thermal Sprayed Al-Zn-Si Coating in Simulated Marine Environments, Surf. Eng., 2014, 30(11), p 801-80510.1179/1743294414Y.0000000315 ↗
3. R.C. Barik, J.A. Wharton, R.J.K. Wood, K.S. Tan, and K.R. Stokes, Erosion and Erosion-Corrosion Performance of Cast and Thermally Sprayed Nickel-Aluminium Bronze, Wear, 2005, 259(1–6), p 230-24210.1016/j.wear.2005.02.033 ↗
4. A.A.M.M. Singh, P. Arul Franco, J.S. Binoj, S. Sahaya Elsi, and M. Divin Kumar, Evaluation of Corrosion Resistance and Characterization of Ni-Cr Coated Structure Using Plasma Spray Coating for Marine Hulls, Plasmonics, 2018, 14(3), p 595-61010.1007/s11468-018-0838-8 ↗
5. Z. Glogović, V. Alar, Z. Kožuh, I. Stojanović, and S. Kralj, Corrosion Properties of Thermal Sprayed Aluminium (TSA) Coatings Deposited by Powder Flame Spraying, Materialwiss. Werkstofftech., 2011, 42(3), p 224-22810.1002/mawe.201100718 ↗
6. H.S. Lee, M.A. Ismail, and H.B. Choe, Arc Thermal Metal Spray for the Protection of Steel Structures: An Overview, Corros. Rev., 2015, 33(1–2), p 31-61
7. S. Paul, S. Shrestha, C.M. Lee, and M.D.F. Harvey, Thermally Sprayed Aluminum (TSA) Coatings for Extended Design Life of 22%Cr Duplex Stainless Steel in Marine Environments, J. Therm. Spray Techn., 2013, 22(2–3), p 328-33610.1007/s11666-012-9879-2 ↗
8. W. Zhao, T. Zhang, R. Xin, M. Wang, H. Ai, J. Sun, and Y. Wang, Effects of Thermally Sprayed Aluminum Coating on the Corrosion Fatigue Behavior of X80 Steel in 3.5 wt% NaCl, J. Therm. Spray Techn., 2015, 24(6), p 974-98310.1007/s11666-015-0271-x ↗
9. F.S. Rogers, Thermal Spray for Commercial Shipbuilding, J. Therm. Spray Techn., 1997, 6(3), p 291-29310.1007/s11666-997-0060-2 ↗
10. R. Piola, A.S.M. Ang, M. Leigh, and S.A. Wade, A Comparison of the Antifouling Performance of Air Plasma Spray (APS) Ceramic and High Velocity Oxygen Fuel (HVOF) Coatings for Use in Marine Hydraulic Applications, Biofouling, 2018, 34(5), p 479-49110.1080/08927014.2018.1465052 ↗
11. L. Abdoli, X. Suo, and H. Li, Distinctive Colonization of Bacillus sp. Bacteria and the Influence of the Bacterial Biofilm on Electrochemical Behaviors of Aluminum Coatings, Colloid. Surface B., 2016, 145, p 688-69410.1016/j.colsurfb.2016.05.075 ↗
12. S.E. Coetser and T.E. Cloete, Biofouling and Biocorrosion in Industrial Water Systems, Crit. Rev. Microbiol., 2005, 31(4), p 213-23210.1080/10408410500304074 ↗
13. A.M. Olszewski, Avoidable MIC-related Failures, J. Fail. Anal. Prev., 2007, 7(4), p 239-24610.1007/s11668-007-9047-z ↗
14. T. Anzai, K. Nakano, K. Nishio, and K. Matsukawa, Biofilm Adhesion and Microbially Influenced Corrosion of SUS304 Welds Exposed to Dam Water, Weld. Int., 2006, 20(9), p 698-70610.1533/wint.2006.3634 ↗
15. B. Cwalina, W. Dec, W. Simka, J. Michalska, and M. Jaworska-Kik, Biofilm Formation on NiTi Surface by Different Strains of Sulphate Reducing Bacteria (Desulfovibrio desulfuricans), Solid State Phenom., 2015, 227, p 302-30510.4028/www.scientific.net/SSP.227.302 ↗
16. H. Liu, D. Xu, A. Dao, G. Zhang, Y. Lv, and H. Liu, Study of Corrosion Behavior and Mechanism of Carbon Steel in the Presence of Chlorella vulgaris, Corros. Sci., 2015, 101, p 84-9310.1016/j.corsci.2015.09.004 ↗
17. A. Abdolahi, E. Hamzah, Z. Ibrahim, and S. Hashim, Application of Environmentally-Friendly Coatings Toward Inhibiting the Microbially Influenced Corrosion (MIC) of Steel: A Review, Polym. Rev., 2014, 54(4), p 702-74510.1080/15583724.2014.946188 ↗
18. E. Juzeliunas, R. Ramanauskas, A. Lugauskas, K. Leinartas, M. Samulevicene, and A. Sudavicius, Influence of Wild Strain Bacillus mycoides on Metals: From Corrosion Acceleration to Environmentally Friendly Protection, Electrochim. Acta, 2006, 51(27), p 6085-609010.1016/j.electacta.2006.01.067 ↗
19. F. Garcia, A. Leonor Rivera Lopez, J. Campos Guillén, L. Hernández Sandoval, C. Regalado González, and V. Castaño, Corrosion Inhibition in Copper by Isolated Bacteria, Anti-Corros. Method. M., 2012, 59(1), p 10-1710.1108/00035591211190490 ↗
20. X. He, Y. Liu, J. Huang, X. Chen, K. Ren, and H. Li, Adsorption of Alginate and Albumin on Aluminum Coatings Inhibits Adhesion of Escherichia coli and Enhances the Anti-Corrosion Performances of the Coatings, Appl. Surf. Sci., 2015, 332, p 89-9610.1016/j.apsusc.2015.01.141 ↗
21. X. He, Y. Liu, Y. Gong, C. Zhou, and H. Li, Autoclaving-Induced In-Situ Grown Alumina on Arc-sprayed Aluminum Coatings: Multiscaled Topography Facilitates Antifouling Performances, Surf. Coat. Techn., 2017, 309, p 295-30010.1016/j.surfcoat.2016.11.066 ↗
22. L. Abdoli, J. Huang, and H. Li, Electrochemical Corrosion Behaviors of Aluminum-based Marine Coatings In the Presence of Escherichia coli Bacterial Biofilm, Mater. Chem. Phys., 2016, 173, p 62-6910.1016/j.matchemphys.2016.01.038 ↗
23. J. Landoulsi, K.E. Cooksey, and V. Dupres, Review-Interactions between Diatoms and Stainless Steel: Focus on Biofouling and Biocorrosion, Biofouling, 2011, 27(10), p 1109-112410.1080/08927014.2011.629043 ↗
24. Y. Mi, Z. Zhou, Z. Wang, G. Wang, and X. Zhang, Research Progress of Antifouling Coatings for Maritime Structures, Mater. Review, 2015, 29(2A), p 35-39
25. Q. Wang and S. Song, Progress in Marine Biologically Influenced Corrosion Study, J. Chin. Soc. Corros. Prot., 2002, 22(3), p 184-188
26. M. Wahl, Marine epibiosis. I. Fouling and Antifouling: Some Basic Aspects, Mar. Ecol. Prog. Ser., 1989, 58, p 175-18910.3354/meps058175 ↗
27. S. Cao, J. Wang, H. Chen, and D. Chen, Progress of Marine Biofouling and Antifouling Technologies, Chin. Sci. Bull., 2010, 56(7), p 598-61210.1007/s11434-010-4158-4 ↗
28. H. Liu, M. Sharma, J. Wang, Y.F. Cheng, and H. Liu, Microbiologically Influenced Corrosion of 316L Stainless Steel in the Presence of Chlorella vulgaris, Int. Biodeterior. Biodegrad., 2018, 129, p 209-21610.1016/j.ibiod.2018.03.001 ↗
29. Y. Chen, X. Liang, Y. Liu, and B. Xu, Development of Electric Arc Spray Forming Technology, J. Mater. Eng., 2010, 2, p 91-96
30. M.H.A. Malek, N.H. Saad, S.K. Abas, and N.M. Shah, Thermal Arc Spray Overview, IOP Conf. Series: Mater. Sci. Eng., 2013, 46, p 1-10
31. I.C. Park and S.J. Kim, Cavitation Damage Behavior in Seawater for Al-Mg Alloy Arc Thermal Spray Coating with Mg Content, Acta Phys. Pol., A, 2016, 129(4), p 572-57710.12693/APhysPolA.129.572 ↗
32. F.M. AlAbbas, C. Williamson, S.M. Bhola, J.R. Spear, D.L. Olson, B. Mishra, and A.E. Kakpovbia, Influence of Sulfate Reducing Bacterial Biofilm on Corrosion Behavior of Low-Alloy, High-Strength Steel (API-5L X80), Int. Biodeterior. Biodegrad., 2013, 78, p 34-4210.1016/j.ibiod.2012.10.014 ↗
33. F.J. Passman, Microbial Contamination and Its Control in Fuels and Fuel Systems Since 1980-A Review, Int. Biodeterior. Biodegrad., 2013, 81, p 88-10410.1016/j.ibiod.2012.08.002 ↗
34. H. Liu, T. Gu, G. Zhang, Y. Cheng, H. Wang, and H. Liu, The Effect of Magneticfield on Biomineralization and Corrosion Behavior of Carbon Steel Induced by Iron-Oxidizing Bacteria, Corros. Sci., 2016, 102, p 93-10210.1016/j.corsci.2015.09.023 ↗
35. R.P. George, P. Muraleedharan, N. Parvathavarthini, H.S. Khatak, and T.S. Rao, Microbiologically Influenced Corrosion of AISI, Type 304 Stainless Steels under Fresh Water Biofilms, Mater. Corros., 2000, 51(4), p 213-21810.1002/(SICI)1521-4176(200004)51:4<213::AID-MACO213>3.0.CO;2-J ↗
36. K. Pedersen, Biofilm Development on Stainless-Steel and PVC Surfaces in Drinking-Water, Water Res., 1990, 24(2), p 239-24310.1016/0043-1354(90)90109-J ↗
37. S.H. Flint, J.D. Brooks, and P.J. Bremer, Properties of the Stainless Steel Substrate, Influencing the Adhesion of Thermo-Resistant Streptococci, J. Food Eng., 2000, 43(4), p 235-24210.1016/S0260-8774(99)00157-0 ↗
38. N. George, M. Mahon, and A. McDonald, Bactericidal Performance of Flame-sprayed Nanostructured Titania-Copper Composite Coatings, J. Therm. Spray Techn, 2010, 19(5), p 1042-105310.1007/s11666-010-9503-2 ↗
39. Y. Cheng, G. Feng, and C.I. Moraru, Micro- and Nanotopography Sensitive Bacterial Attachment Mechanisms: A Review, Front. Microbiol., 2019, 10(4), p 1-16
40. D. Ornek, T.K. Wood, C.H. Hsu, and F. Mansfeld, Corrosion Control Using Regenerative Biofilms (CCURB) on Brass in Different Media, Corros. Sci., 2002, 44(10), p 2291-230210.1016/S0010-938X(02)00038-0 ↗
41. A. Fattah-alhosseini and S. Vafaeian, Influence of Grain refinement on the Electrochemical Behavior of AISI, 430 Ferritic Stainless Steel in an Alkaline Solution, Appl. Surf. Sci., 2016, 360, p 921-92810.1016/j.apsusc.2015.11.085 ↗
42. B. Syrek-Gerstenkorn, S. Paul, and A.J. Davenport, Use of Thermally Sprayed Aluminium (TSA) Coatings to Protect Offshore Structures in Submerged and Splash Zones, Surf. Coat. Technol., 2019, 374, p 124-13310.1016/j.surfcoat.2019.04.048 ↗
43. A. Lopez-Ortega, R. Bayon, and J.L. Arana, Evaluation of Protective Coatings for High-Corrosivity Category Atmospheres in Offshore Applications, Materials, 2019, 12(8), p 1-2310.3390/ma12081325 ↗
44. R.G. Echaniz, S. Paul, and R. Thornton, Effect of Seawater Constituents on the Performance of Thermal Spray Aluminum in Marine Environments, Mater. Corros., 2019, 70(6), p 996-100410.1002/maco.201810764 ↗
45. A. López-Ortega, J.L. Arana, E. Rodríguez, and R. Bayón, Corrosion, Wear and Tribocorrosion Performance of a Thermally Sprayed Aluminum Coating Modified by Plasma Electrolytic Oxidation Technique for Offshore Submerged Components Protection, Corros. Sci., 2018, 143, p 258-28010.1016/j.corsci.2018.08.001 ↗
46. B. Szczygiel and M. Kolodziej, Composite Ni/Al2O3 Coatings and Their Corrosion Resistance, Electrochim. Acta, 2005, 50(20), p 4188-419510.1016/j.electacta.2005.01.040 ↗
47. X. Sheng, Y.P. Ting, and S.O. Pehkonen, The Influence of Sulphate-Reducing Bacteria Biofilm on the Corrosion of Stainless Steel AISI, 316, Corros. Sci., 2007, 49(5), p 2159-217610.1016/j.corsci.2006.10.040 ↗