Plasma Spray Deposition Enhancement of Titanium Nitride Layer Using Nitrogen-Contained Plasma Irradiation of Titanium Substrate as a Pre-spraying Method
Source abstract
Abstract
Reactive plasma spray of TiN ceramic coating attracts much attention over the years because of its ability to deposit thick layers on various metal surfaces. However, some mechanical properties of the coating such as its hardness should be improved. In this study, initially a thin layer of titanium nitride was prepared on a titanium substrate during irradiation of titanium substrate by a thermal DC nitrogen-contained plasma jet. Then, during reactive plasma spraying, Ti particles were injected into plasma jet, converted to titanium nitride and huddled on to the substrate. This new hybrid method (primary plasma irradiation and post-reactive plasma spraying) for deposition of TiN coatings would combine the advantages of both plasma-enhanced chemical vapor deposition and reactive plasma spraying methods in part. It resulted in a thick and hard layer of titanium nitride film. Sample produced by this method was analyzed with x-ray diffraction confirming titanium nitride production. Vickers hardness was measured using optical microscopy which was around 1319 Hv300g. To study the cross section of the layer, optical microscopy and scanning electron microscopy (SEM) were used.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A. Kobayashi, Formation of TiN Coatings by Gas Tunnel Type Plasma Reactive Spraying, Surf. Coat. Technol., 2000, 132(2), p 152-15710.1016/S0257-8972(00)00725-8 ↗
2. T. Bacci, L. Bertamini, F. Ferrari, F.P. Galliano, and E. Galvanetto, Reactive Plasma Spraying of Titanium in Nitrogen Containing Plasma Gas, Mater. Sci. Eng., A, 2000, 283(1), p 189-19510.1016/S0921-5093(00)00704-8 ↗
3. F.S. Shieu, L.H. Cheng, Y.C. Sung, J.H. Huang, and G.P. Yu, Microstructure, Chemistry and Coating Properties of Ion-plated TiN on Type 304 Stainless Steel, Mater. Chem. Phys., 1997, 50(3), p 248-25510.1016/S0254-0584(97)01945-7 ↗
4. S.B.A.A.U.O.T. Logothetidis, I.B.A.A.U.O.T. Alexandrou, and S.B.A.A.U.O.T. Kokkou, Optimization of TiN Thin Film Growth With In Situ Monitoring: The Effect of Bias Voltage and Nitrogen Flow Rate, Surf. Coat. Technol., 1996, 80(1–2), p 66-7110.1016/0257-8972(95)02687-8 ↗
5. D. Maheo and J.M. Poitevin, Structure of TiN Films Deposited on Heated and Negatively Biased Silicon Substrates, Thin Solid Films, 1992, 215(1), p 8-1310.1016/0040-6090(92)90693-6 ↗
6. N. Udomkan, V. Sutorn, P. Limsuwan, and P. Winotai. Properties of Titanium Nitride Film Coated on Stainless Steel 304. KASETSART J. 209 (2003).
7. Z. Mao, J. Ma, J. Wang, and B. Sun, Properties of TiN-Matrix Coating Deposited by Reactive HVOF Spraying, J. Coat. Technol. Res., 2009, 6(2), p 243-25010.1007/s11998-008-9105-9 ↗
8. F. Vaz, P. Cerqueira, L. Rebouta, S.M.C. Nascimento, E. Alves, P. Goudeau, J.P. Riviere, K. Pischow, and J. De Rijk, Structural, Optical and Mechanical Properties of Coloured TiN x O y Thin Films, Thin Solid Films, 2004, 447, p 449-45410.1016/S0040-6090(03)01123-4 ↗
9. M. Stoiber, S. Perlot, C. Mitterer, M. Beschliesser, C. Lugmair, and R. Kullmer, PACVD TiN/Ti–B–N Multilayers: From Micro-to Nano-Scale, Surf. Coat. Technol., 2004, 177, p 348-35410.1016/j.surfcoat.2003.09.025 ↗
10. P. Motte, M. Proust, J. Torres, Y. Gobil, Y. Morand, J. Palleau, R. Pantel, and M. Juhel, TiN-CVD Process Optimization for Integration With Cu-CVD, Microelectron. Eng., 2000, 50(1), p 369-37410.1016/S0167-9317(99)00304-4 ↗
11. H. Yeom, B. Hauch, G. Cao, B. Garcia-Diaz, M. Martinez-Rodriguez, H. Colon-Mercado, L. Olson, and K. Sridharan, Laser Surface Annealing and Characterization of Ti 2 AlC Plasma Vapor Deposition Coating on Zirconium-Alloy Substrate, Thin Solid Films, 2016, 615, p 202-20910.1016/j.tsf.2016.07.024 ↗
12. YuL Su and W.H. Kao, Optimum Multilayer TiN–TiCN Coatings for Wear Resistance and Actual Application, Wear, 1998, 223(1), p 119-13010.1016/S0043-1648(98)00276-2 ↗
13. S.Y. Lee, J.W. Chung, K.B. Kim, J.G. Han, and S.S. Kim, Duplex Plasma Surface Treatment Process on Mild Steel and High Alloyed Tool Steel, Surf. Coat. Technol., 1996, 86, p 325-33110.1016/S0257-8972(96)02974-X ↗
14. Z. Duan and J. Heberlein, Arc Instabilities in a Plasma Spray Torch, J. Thermal Spray Technol., 2002, 11(1), p 44-5110.1361/105996302770348961 ↗
15. E. Pfender, Thermal Plasma Technology: Where do we Stand and Where are we Going?, Plasma Chem. Plasma Process., 1999, 19(1), p 1-3110.1023/A:1021899731587 ↗
16. O.V. Penkov, M. Khadem, W.-S. Lim, and D.-E. Kim, A Review of Recent Applications of Atmospheric Pressure Plasma Jets for Materials Processing, J. Coat. Technol. Res., 2015, 12(2), p 225-23510.1007/s11998-014-9638-z ↗
17. S. Mohsenian, M.S. Esmaili, J. Fathi, and B. Shokri, Hydrogen and Carbon Black Nano-Spheres Production Via Thermal Plasma Pyrolysis of Polymers, Int. J. Hydrogen Energy, 2016, 41(38), p 16656-1666310.1016/j.ijhydene.2016.05.150 ↗
18. C.S. Wu, L. Wang, W.J. Ren, and X.Y. Zhang, Plasma arc Welding: Process, Sensing, Control and Modeling, J. Manuf. Process., 2014, 16(1), p 74-8510.1016/j.jmapro.2013.06.004 ↗
19. P. Freton, J.J. Gonzalez, A. Gleizes, F.C. Peyret, G. Caillibotte, and M. Delzenne, Numerical and Experimental Study of a Plasma cutting Torch, J. Phys. D Appl. Phys., 2001, 35(2), p 11510.1088/0022-3727/35/2/304 ↗
20. E. Pfender, Fundamental Studies Associated with the Plasma Spray Process, Surf. Coat. Technol., 1988, 34(1), p 1-1410.1016/0257-8972(88)90083-7 ↗
21. Wenran Feng, Dianran Yan, Jining He, Guling Zhang, Guangliang Chen, Gu Weichao, and Size Yang, Microhardness and Toughness of the TiN Coating Prepared by Reactive Plasma Spraying, Appl. Surf. Sci., 2005, 243(1), p 204-21310.1016/j.apsusc.2004.09.064 ↗
22. E. Galvanetto, F.P. Galliano, F. Borgioli, U. Bardi, and A. Lavacchi, XRD and XPS Study on Reactive Plasma Sprayed Titanium–Titanium Nitride Coatings, Thin Solid Films, 2001, 384(2), p 223-22910.1016/S0040-6090(00)01871-X ↗
23. Lisong Xiao, Dianran Yan, Jining He, Lin Zhu, Yanchun Dong, Jianxin Zhang, and Xiangzhi Li, Nanostructured TiN Coating Prepared by Reactive Plasma Spraying in Atmosphere, Appl. Surf. Sci., 2007, 253(18), p 7535-753910.1016/j.apsusc.2007.03.062 ↗
24. D. Zou, D. Yan, L. Xiao, and Y. Dong, Characterization of Nanostructured TiN Coatings Fabricated by Reactive Plasma Spraying, Surface Coat. Technol., 2008, 202(10), p 1928-193410.1016/j.surfcoat.2007.08.022 ↗
25. V.-A. Şerban, R.A. Roşu, A.I. Bucur, and D.R. Pascu, Deposition of Titanium Nitride Layers by Electric Arc–Reactive Plasma Spraying Method, Appl. Surf. Sci., 2013, 265, p 245-24910.1016/j.apsusc.2012.10.187 ↗
26. S. Mohsenian, M.S. Esmaili, B. Shokri, and M. Ghorbanalilu, Physical Characteristics of Twin DC Thermal Plasma Torch Applied to Polymer Waste Treatment, J. Electrostat., 2015, 76, p 231-23710.1016/j.elstat.2015.06.004 ↗
27. J.-W. Lim, H.-S. Park, T.-H. Park, J.-J. Lee, and J. Joo, Mechanical Properties of Titanium Nitride Coatings Deposited by Inductively Coupled Plasma Assisted Direct Current Magnetron Sputtering, J. Vacuum Sci. Technol. Vacuum Surf. Films, 2000, 18, p 524-52810.1116/1.582219 ↗
28. W. Feng, D. Yan, J. He, X. Li, and Y. Dong, Reactive Plasma Sprayed TiN Coating and Its Tribological Properties, Wear, 2005, 258(5–6), p 806-81110.1016/j.wear.2004.09.057 ↗
29. G.M. Ingo, S. Kaciulis, A. Mezzi, T. Valente, F. Casadei, and G. Gusmano, Characterization of Composite Titanium Nitride Coatings Prepared by Reactive Plasma Spraying, Electrochim. Acta, 2005, 50(23), p 4531-453710.1016/j.electacta.2004.10.089 ↗
30. R.A. Roşu, V.-A. Şerban, A.I. Bucur, and U. Dragoş, Deposition of Titanium Nitride and Hydroxyapatite-Based Biocompatible Composite by Reactive Plasma Spraying, Appl. Surf. Sci., 2012, 258(8), p 3871-387610.1016/j.apsusc.2011.12.049 ↗
31. R. Yang, C. Zhu, Q. Wei, and D. Zheng, Investigations on Structural, Elastic, Thermodynamic and Electronic Properties of TiN, Ti2 N and Ti3N2 Under High Pressure by First-Principles, J. Phys. Chem. Solids, 2016, 98, p 10-1910.1016/j.jpcs.2016.05.012 ↗
32. S. Mohsenian, M.S. Esmaeili, J. Fathi, and B. Shokr, Synthesis of Carbon Nano-Spheres and Nano-Tubes by Thermal Plasma Processing of Polypropylene, Appl. Phys. A, 2018, 124, p 54610.1007/s00339-018-1983-9 ↗