journal article·2010-01

In Situ Particle Behavior of Cast Iron Powder by Suspension Plasma Spraying

C. Tekmen, K. Iwata, Y. Tsunekawa, M. Okumiya

Journal of Thermal Spray Technology· Volume 19· Issue 1-2
Publisher page

Abstract

Abstract In this study, suspension plasma spraying is used to produce cast iron coatings that benefit from a graphite structure. In order to increase the graphite content, different hydrocarbons in the form of liquid suspension (hexane and toluene) and gas precursor (methane) were injected into the plasma stream along with iron powder. Besides promoting the formation of a soot carbon structure, liquid hydrocarbon injection also prevents in-flight particle oxidation, which is a major concern when spraying metals. In addition, it has been observed that using a shroud during spraying significantly increases the amount of soot carbon in cast iron coatings, which can be transformed into graphite by post annealing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. G. Barbezat, Advanced Therml Spray Technology and Coating for Lightweight Engine Blocks for the Automotive Industry, Surf. Coat. Technol., 2005, 200, p 1990-199310.1016/j.surfcoat.2005.08.017 ↗
2. I. Ozdemir, Y. Tsunekawa, M. Okumiya, and T. Ueno, Graphitization Potential of Cast Iron Powder in Atmospheric Plasma Spray Conditions, Mater. Trans., 2006, 47(7), p 1710-171610.2320/matertrans.47.1710 ↗
3. E. Takeuchi, M. Matsunaga, T. Nakagawa, F.-S. Dai, and H.-Y. Ra, Friction and Wear of Sintered Cast Iron Products, Wear, 1982, 75(2), p 303-31210.1016/0043-1648(82)90155-7 ↗
4. I. Ozdemir, T. Ueno, Y. Tsunekawa, and M. Okumiya, Cast Iron Coatings Containing Graphite Structure by Atmospheric Plasma Spraying, Thermal Spray: Advances in Technology and Application, May 10-12, 2004 (Osaka, Japan), ASM International, 2004, p 298-30310.31399/asm.cp.itsc2004p0298 ↗
5. Y. Tsunekawa, I. Ozdemir, T. Ueno, and M. Okumiya, Change in Graphite Structure of Cast Iron Coatings through the Process of Plasma Spraying, Surf. Modif. Technol., 2006, XVIII, p 3-9
6. K. Iwata, C. Tekmen, Y. Tsunekawa, and M. Okumiya, Graphite Structure in Coatings by Plasma Spraying with Iron Powder and Suspension, Asian Thermal Spray, Nov 6-8, 2008 (Singapore), CD-ROM
7. Y. Tsunekawa, I. Ozdemir, and M. Okumiya, Plasma Sprayed Cast Iron Coatings Containing Solid Lubricant Graphite and h-BN Structure, J. Therm. Spray Technol., 2006, 15(2), p 239-24510.1361/105996306X108156 ↗
8. M.F. Morks, Y. Tsunekawa, M. Okumiya, and M.A. Shoeib, Splat Morphology and Microstructure of Plasma Sprayed Cast Iron with Different Preheat Substrate Temperatures, J. Therm. Spray Technol., 2002, 11(2), p 226-23210.1361/105996302770348880 ↗
9. M.F. Morks, Y. Tsunekawa, M. Okumiya, and M.A. Shoeib, Splat Microstructure of Plasma Sprayed Cast Iron with Different Chamber Pressures, J. Therm. Spray Technol., 2003, 12(2), p 282-28910.1361/105996303770348393 ↗
10. M.F. Morks, Y. Tsunekawa, M. Okumiya, and M.A. Shoeib, Microstructure of Plasma-Sprayed Cast Iron Splats with Different Particle Sizes, Mater. Trans., 2003, 44(4), p 743-74810.2320/matertrans.44.743 ↗
11. J.L. Dorier, Ph. Guittienme, Ch. Hollenstein, M. Gindrat, and A. Refke, Mechanism of Films and Coatings Formation from Gaseous and Liquid Precursors with Low Pressure Plasma Spray Equipment, Surf. Coat. Technol., 2008, 203(15), p 2125-213010.1016/j.surfcoat.2008.10.034 ↗
12. J. Lampman and A. Peters, Ferroalloys and Other Additives to Liquid Iron and Steel, STP 739, Special Technical Publications, ASTM, 1981, p 125-14310.1520/STP739-EB ↗
13. C. Tekmen, K. Iwata, Y. Tsunekawa, and M. Okumiya, Influence of Methane and Carbon Dioxide on In-Flight Particle Behavior of Cast Iron Powder by Atmospheric Plasma Spraying, Mater. Lett., 2009, 63(28), p 2439-244110.1016/j.matlet.2009.08.026 ↗
14. B. Dippel, H. Jander, and J. Heintzenberg, NIR FT Raman Spectroscopic Study of Flame Soot, Phys. Chem. Chem. Phys., 1999, 1, p 4707-471210.1039/a904529e ↗
15. J.B. Donnet, R.C. Bansal, and M.J. Wang, Ed., Carbon Black, 2nd ed., CRC Press, New York, 1993
16. S.T. Cham, R. Sakurovs, H. Sun, and V. Sahajwalla, Influence of Temperature on Carbon Dissolution of Cokes in Molten Iron, ISIJ Int., 2006, 46(5), p 652-65910.2355/isijinternational.46.652 ↗
17. M.F. Morks, Y. Tsunekawa, and M. Okumiya, Characterization and Properties of Splats Sprayed with Different Cast Iron Powders, Mater. Lett., 2004, 58, p 2481-248510.1016/j.matlet.2004.02.029 ↗
18. M.F. Morks, Y. Tsunekawa, N.F. Fahim, and M. Okumiya, Microstructure and Friction Properties of Plasma Sprayed Al–Si Alloyed Cast Iron Coatings, Mater. Chem. Phys., 2006, 96, p 170-17510.1016/j.matchemphys.2005.07.002 ↗
19. M.F. Morks, M.A. Shoeib, Y. Tsunekawa, and M. Okumiya, Effect of Powder Composition on the Microstructure and Wear Properties of Sprayed Cast Iron Coatings, Thermal Spray: Advancing the Science and Applying Technology, May 5-8, 2003 (Florida), ASM International, 2003, p 317-32210.31399/asm.cp.itsc2003p0317 ↗
20. P.A. Grattan and J.K. Lancaster, Abrasion by Lamellar Solid Lubricants, Wear, 1967, 10, p 453-46810.1016/0043-1648(67)90188-3 ↗
21. K.W. Street, M. Marchetti, R.L. Vander Wal, and A.J. Tomasek, Evaluation of the Tribological Behavior of Nano-Onions in Krytox 143AB, Tribol. Lett., 2004, 16(1-2), p 143-14910.1023/B:TRIL.0000009724.01711.f4 ↗
22. P.A. Thrower and L.R. Radovic, Chemistry and Physics of Carbon, Vol 26, CRC Press, Boca Raton, 1999, p 135
23. C.R. Houska and B.E. Warren, X-Ray Study of the Graphitization of Carbon Black, J. Appl. Phys., 1954, 25(12), p 1503-150910.1063/1.1702373 ↗
24. A. Oya and H. Marsh, Review Phenomena of Catalytic Graphitization, J. Mater. Sci., 1982, 17, p 309-32210.1007/BF00591464 ↗