journal article·2014-10-04

Numerical Simulation of Minimal Average Bonding Strength to Suppress Rebounding in Cold Spraying Cu/Cu: A Preliminary Study

Kai Wang, Lingyan Kong, Yongshan Tao, Tiefan Li, Tianying Xiong

Publisher page

Abstract

In this work, finite element simulations were performed to investigate the competition between bonding and rebounding when a Cu particle of 25 μm in diameter impinged Cu substrate. With the help of cohesive zone model, the trend of the minimal average bonding strength to suppress rebounding (MABSSR) was predicted as a function of initial velocity under certain conditions. Result shows, MABSSR has a nonlinear trend versus initial velocity under the conditions considered. If the real trend of MABSSR is similar to that observed, a hypothesis is presented to explain the critical deposition velocity. Finally, defects in the current work are discussed. Analysis shows the defects have no influence on predicting the overall trend of MABSSR in the current work.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, and V.M. Fomin, Cold Spray Technology, Elsevier, Amsterdam, 2006
2. V.K. Champagne, The Cold Spray Materials Deposition Process: Fundamentals and Applications, Woodhead Publishing Limited and CRC Press LLC, Cambridge, 2007
3. M. Grujicic, C.L. Zhao, C. Tong, W.S. Derosset, and D. Helfritch, Analysis of the Impact Velocity of Powder Particles in the Cold-Gas Dynamic-Spray Process, Mater. Sci. Eng. A, 2004, 368(1-2), p 222-23010.1016/j.msea.2003.10.312 ↗
4. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54(3), p 729-74210.1016/j.actamat.2005.10.005 ↗
5. J. Wu, H. Fang, S. Yoon, H. Kim, and C. Lee, The Rebound Phenomenon in Kinetic Spraying Deposition, Scripta Mater., 2006, 54(4), p 665-66910.1016/j.scriptamat.2005.10.028 ↗
6. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, and D. Helfritch, Computational Analysis of the Interfacial Bonding Between Feed-Powder Particles and the Substrate in the Cold-Gas Dynamic-Spray Process, Appl. Surf. Sci., 2003, 219(3-4), p 211-22710.1016/S0169-4332(03)00643-3 ↗
7. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-439410.1016/S1359-6454(03)00274-X ↗
8. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25(8), p 681-68810.1016/j.matdes.2004.03.008 ↗
9. G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. Lee, General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56(17), p 4858-486810.1016/j.actamat.2008.06.003 ↗
10. V.K. Champagne, D. Helfritch, P. Leyman, S.G. Ahl, and B. Klotz, Interface Material Mixing Formed by the Deposition of Copper on Aluminum by Means of the Cold Spray Process, J. Therm. Spray Technol., 2005, 14(3), p 330-33410.1361/105996305X59332 ↗
11. A. Manap, T. Okabe, and K. Ogawa, Computer Simulation of Cold Sprayed Deposition Using Smoothed Particle Hydrodynamics, Procedia Eng., 2011, 10, p 1145-115010.1016/j.proeng.2011.04.190 ↗
12. B. Yildirim, S. Mueftue, and A. Gouldstone, On Cohesion of Micron Scale Metal Particles in High Velocity Impact with a Metal Substrate, Proceedings of the ASME/STLE International Joint Tribology Conference—2011, Oct. 24-26, 2011 (Los Angeles, CA), ASME, 2012, p 373-37510.1115/IJTC2011-61084 ↗
13. J.O. Hallquist, LS-DYNA Keyword User’s Manual, Livermore Software Technology Corporation, Livermore, CA, 2009
14. B. Yildirim, S. Muftu, and A. Gouldstone, Modeling of High Velocity Impact of Spherical Particles, Wear, 2011, 270(9-10), p 703-71310.1016/j.wear.2011.02.003 ↗
15. M.A. Meyers, Dynamic Behavior of Materials, Wiley-Interscience publication, New York, 1994, p 126-13510.1002/9780470172278 ↗
16. G.R. Johnson and W.H. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures, Proceedings of the 7th International Symposium on Ballistics, The Hague, Netherlands: International Ballistics Committee, 1983, p 541-547
17. P.J. Blau, Friction, Lubrication, and Wear Technology, Chap. 1.2, ASM Handbook, 10th edn, ASM International, Materials Park, 1992
18. T. Schmidt, “Kaltgasspritzen: Eine Analyse Des Materialverhaltens Beim Partikelaufprall Und Die Daraus Abgeleitete Prozessoptimierung,” Ph.D. Thesis, Helmut Schmidt University, 2007
19. S. Bala and J. Day, General Guidelines for Crash Analysis in LS-DYNA, http://awg.lstc.com/tiki/tiki-download_file.php?fileId=18 , Accessed Aug 19, 2014
20. Oxygen-Free High Conductivity Copper, Soft, UNS C10200, http://matweb.com/search/DataSheet.aspx?MatGUID=a629b7c5643b44bfb25b9bba7f8140ab , Accessed Sept 30, 2013
21. J.D. Clayton and J.J. Rencis, Numerical Integration in the Axisymmetric Finite Element Formulation, Adv. Eng. Softw., 2000, 31(2), p 137-14110.1016/S0965-9978(99)00021-6 ↗
22. T. Erhart, Review of Solid Element Formulations in LS-DYNA, Forum 2011—Entwicklerforum, Oct. 12-13, 2011 (Stuttgart, Germany), 2011
23. S. Bala, Tiebreak Contact in LS-DYNA, 2007, http://blog2.d3view.com/tiebreak-contact-in-ls-dyna/ , Accessed June 25, 2014
24. J.T. Wang, Investigating Some Technical Issues on Cohesive Zone Modeling of Fracture, J. Eng. Mater. Technol., 2013, 135(1), p 01100310.1115/1.4007605 ↗
25. M. Elices, G.V. Guinea, J. Gomez, and J. Planas, The Cohesive Zone Model: Advantages, Limitations and Challenges, Eng. Fract. Mech., 2002, 69(2), p 137-16310.1016/S0013-7944(01)00083-2 ↗
26. G.T. Camacho and M. Ortiz, Computational Modelling of Impact Damage in Brittle Materials, Int. J. Solids Struct., 1996, 33(20-22), p 2899-293810.1016/0020-7683(95)00255-3 ↗
27. N. Chandra, H. Li, C. Shet, and H. Ghonem, Some Issues in the Application of Cohesive Zone Models for Metal-Ceramic Interfaces, Int. J. Solids Struct., 2002, 39(10), p 2827-285510.1016/S0020-7683(02)00149-X ↗
28. S. Yin, X. Wang, W. Li, H. Liao, and H. Jie, Deformation Behavior of the Oxide Film on the Surface of Cold Sprayed Powder Particle, Appl. Surf. Sci., 2012, 259, p 294-30010.1016/j.apsusc.2012.07.036 ↗
29. T. Schmidt, H. Assadi, F. Gaertner, H. Richter, T. Stoltenhoff, H. Kreye, and T. Klassen, From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Therm. Spray Technol., 2009, 18(5-6), p 794-80810.1007/s11666-009-9357-7 ↗
30. S. Bala, Best Practices for Modeling Recoverable Low Density Foams—by Example, 2006, http://blog2.d3view.com/best-practices-for-modeling-recoverable-low-density-foams-by-example/ , Accessed June 25, 2014
31. Y.V. Kurochkin, Y.N. Demin, and S.I. Soldatenkov, Demonstration of the Method of Cold Gasdynamic Spraying of Coatings, Chem. Pet. Eng., 2002, 38(3-4), p 245-24810.1023/A:1019637513791 ↗
32. F.P. Bowden and E.H. Freitag, The Friction of Solids at Very High Speeds. 1. Metal on Metal. 2. Metal on Diamond, Proc. R. Soc. London, Ser. A, 1958, 248(1254), p 35010.1098/rspa.1958.0248 ↗
33. F.P. Bowden and P.A. Persson, Deformation, Heating and Melting of Solids in High-Speed Friction, Proc. R. Soc. London, Ser. A, 1961, 260(1300), p 433-45110.1098/rspa.1961.0044 ↗
34. E.A. Avallone, T. Baumeister, and A. Sadegh, Marks’ Standard Handbook for Mechanical Engineers (Standard Handbook for Mechanical Engineers), Chap. 3, 11th edn, McGraw-Hill, New York, 2006, p. 22
35. F. Gartner, T. Stoltenhoff, C. Borchers, and H. Kreye, Microstructures and Key Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200(16-17), p 4947-496010.1016/j.surfcoat.2005.05.011 ↗
36. F. Gartner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Kocak, Mechanical Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200(24), p 6770-678210.1016/j.surfcoat.2005.10.007 ↗