A Discussion on the Limits to Coating Reproducibility Based on Heat Transfer Instabilities
Source abstract
Abstract
During the past several decades, plasma spraying has emerged as an important rapid solidification technology, aimed to depositing protective and functional coating on a variety of substrates in sectors as diverse as aerospace, manufacturing, automotive, consumer, and biomedical industries. As these applications demand high-quality coatings with reproducible and reliable properties, stringent process control is mandatory, supported by sophisticated diagnostic equipment. However, owing to the highly nonlinear nature of the plasma spray process, non-deterministic coating property changes make these requirements difficult if not impossible to achieve. In this contribution, possible reasons for nonlinearity are discussed based on a stability theory formalism as described by a cusp catastrophe of codimension 2 (Riemann–Hugoniot catastrophe).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. R.B. Heimann, Plasma Spray Coating. Principles and Applications, 2nd ed., Weinheim, Wiley-VCH, 2008
2. R.B. Heimann, Better Quality Control: Stochastic Approaches to Optimize Properties and Performance of Plasma Sprayed Coatings, J. Thermal Spray Technol., 2010, 19(4), p 765-77810.1007/s11666-009-9385-3 ↗
3. M. Vardelle and P. Fauchais, Plasma Spray Processes: Diagnostics and Control?, Pure Appl. Chem., 1999, 71(10), p 1909-191810.1351/pac199971101909 ↗
4. P. Fauchais, M. Vardelle, and A. Vardelle, Reliability of Plasma Sprayed Coatings: Monitoring the Plasma Spray Process and Improving the Quality of Coatings, J. Phys. D Appl. Phys., 2013, 46(22), p 22401610.1088/0022-3727/46/22/224016 ↗
5. S. Sampath, X. Jiang, A. Kulkarni, J. Matejicek, D.L. Gilmore, and R.A. Neiser, Development of Process Maps for Plasma Spray: Case Study for Molybdenum, Mater. Sci. Eng., A, 2003, 348, p 54-6610.1016/S0921-5093(02)00642-1 ↗
6. S. Guessasma, D. Hao, L. Moulla, H. Liao, and C. Coddet, Neural Computation to Estimate Heat Flux in An Atmospheric Plasma Spray Process, Heat Transfer Eng., 2005, 26(10), p 65-7210.1080/01457630500248679 ↗
7. T.J. Ross, Fuzzy Logic with Engineering Applications, Wiley, Chichester, 2004
8. V. Srinivasan, A. Vaidya, T. Streibl, M. Friis, and S. Sampath, On the Reproducibility of Air Plasma Spray Process and Control of Particle State, J. Thermal Spray Technol., 2006, 15(4), p 739-74310.1361/105996306X147199 ↗
9. J. Qin, L. Wang, D.P. Yuan, D. Gao, and B.Z. Zhang, Chaos and Bifurcations in Periodic Windows Observed in Plasmas, Phys. Rev. Lett., 1989, 63(163), p 163-16610.1103/PhysRevLett.63.163 ↗
10. S. Ghorui and A.K. Das, Origin of Fluctuations in Atmospheric Pressure Arc Plasma Physics, Phys. Rev. E, 2004, 69, p 0240810.1103/PhysRevE.69.026408 ↗
11. S. Ghorui, S.H. Sahasrabudhe, P.S.S. Murthy, A.K. Das, and N. Venkatramani, Experimental Evidence of Chaotic Behavior in Atmospheric Pressure Discharge, IEEE Trans. Plasma Sci., 2000, 28(1), p 253-26010.1109/27.842916 ↗
12. S. Ghorui and A.K. Das, Theory of Dynamic Behavior in Atmospheric Pressure Arc Plasma Devices. Part I: Theory and System Behavior, IEEE Trans. Plasma Sci., 2004, 32(1), p 296-30710.1109/TPS.2004.826013 ↗
13. E. Pfender, Heat Transfer from Thermal Plasmas to Neighboring Walls or Electrodes, Pure Appl. Chem., 1976, 48, p 199-21310.1351/pac197648020199 ↗
14. G.D. Dhamale, N. Tiwari, V.L. Mathe, S.V. Bhoraskar, and S. Ghorui, In Situ Probing of Temperature in Radio Frequency Thermal Plasma Using Yttrium Ion Emission Lines During Synthesis of Yttria Nanoparticles, J. Appl. Phys., 2017, 122(2), p 02330110.1063/1.4991809 ↗
15. E. Pfender, Energy Transport in Thermal Plasmas, Pure Appl. Chem., 1980, 52(7), p 1773-180010.1351/pac198052071773 ↗
16. E. Pfender, J. Finkes, and R. Spores, Entrainment of Cold Gas into Thermal Plasma Jets, Plasma Chem. Plasma Proc., 1991, 11(4), p 529-54310.1007/BF01447164 ↗
17. R. Thom, Structural Stability and Morphogenesis. An Outline of a General Theory of Models. (W.A. Benjamin Advanced Book Progr., 1975)
18. V.V. Palin and E.V. Radkevich, On the Riemann-Hugoniot Catastrophy, Russ. J. Math. Phys., 2015, 22(2), p 227-23610.1134/S1061920815020090 ↗
19. G. Nicolis and I. Prigogine, Self-Organization in Nonequilibrium Systems-From Dissipative Structures to Order Through Fluctuations, Wiley, New York, 1977
20. E.C. Zeeman, Catastrophe Theory, Sci. Am., 1976, 234(4), p 65-8310.1038/scientificamerican0476-65 ↗
21. A.G. Eliseev, Radiative-Conductive Heat Transfer of An Air Plasma with a Semi-Infinite Solid Behind a Reflected Shock Wave, in Problems of Convective and Radiative-Conductive Heat Transfer. (Izdat: Nauka, 1980)
22. S. Vaidyanathan, Adaptive Integral Sliding Mode Controller Design for the Control and Synchronization of a Rod-type Plasma Torch Chaotic System, Applications of Sliding Mode Control in Science and Engineering. Studies in Computational Intelligence, S. Vaidyanathan and C.H. Lien, Ed., Springer, Berlin, 2017, p 263-28710.1007/978-3-319-55598-0_12 ↗
23. M.I. Boulos, The Role of Transport Phenomena and Modeling in the Development of Thermal Plasma Technology, Plasma Chem. Plasma Proc., 2016, 36(1), p 3-2810.1007/s11090-015-9660-7 ↗
24. P. Proulx, J. Mostaghimi, and M.I. Boulos, Plasma-Particle Interaction Effects in Induction Plasma Modeling Under Dense Loading Conditions, Int. J. Heat Mass Transfer, 1985, 28(7), p 1327-133610.1016/0017-9310(85)90163-2 ↗
25. C.T. Crowe, M.P. Sharma, and D.E. Stock, The Particle-Source-In Cell (PSI-CELL) Model for Gas-Droplet Flows, J. Fluid Eng., 1977, 99(2), p 325-33210.1115/1.3448756 ↗
26. I.G. Zaltsman, Boltzmann Number, Thermopedia. https://doi.org/10.1615/atoz.b.boltzmann_number . Accessed 29 Oct 201810.1615/atoz.b.boltzmann_number ↗
27. C. Moreau, J.F. Bisson, R.S. Lima, and B.R. Marple, Diagnostics for Advanced Materials Processing by Plasma Spraying, Pure Appl. Chem., 2005, 77(2), p 443-46210.1351/pac200577020443 ↗
28. J.L. Smialek and R.A. Miller, Revisiting the Birth of 7YSZ Thermal Barrier Coatings: Stephan Stecura, Coatings, 2018, 8(7), p 25510.3390/coatings8070255 ↗
29. K. Yuan, J. Zhu, W.J. Dong, Y.G. Yu, X.L. Lu, X.J. Ji, and X.Y. Wang, Applying Low-Pressure Plasma Spray (LPPS) for Coatings in Low-Temperature SOFC, Int. J. Hydrogen Energy, 2017, 42(34), p 22243-2224910.1016/j.ijhydene.2017.04.215 ↗
30. I. Burlacov, J. Jirkowsky, L. Kavan, R. Ballhorn, and R.B. Heimann, Cold Gas Dynamic Spraying (CGDS) of TiO2 (Anatase) Powders Onto Poly(sulfone) Substrates: Microstructural Characterization and Photocatalytic Efficiency, J. Photochem. Photobiol., A, 2007, 187, p 285-29210.1016/j.jphotochem.2006.10.023 ↗
31. R.B. Heimann and H.D. Lehmann, Bioceramic Coatings for Medical Implants. Trends and Techniques, Wiley, Weinheim, 201510.1002/9783527682294 ↗
32. J.F. Bisson, B. Gauthier, and C. Moreau, Effect of Plasma Fluctuations on In-Flight Particle Parameters, J. Thermal Spray Technol., 2003, 12(1), p 38-4310.1361/105996303770348483 ↗
33. N. Tiwari, S. Bhandari, and S. Ghorui, Stability and Structures in Atmospheric Pressure DC Non-transferred Arc Plasma Jets of Argon, Nitrogen, and Air, Phys. Plasmas, 2018, 25, p 07210310.1063/1.5034397 ↗
34. S. Guessasma, G. Montavon, and C. Coddet, On the Implementation of the Fractal Concept to Quantify Thermal Spraying Deposit Surface Characteristics, Surf. Coat. Technol., 2003, 173, p 24-3810.1016/S0257-8972(03)00443-2 ↗
35. G. Reisel and R.B. Heimann, Correlation Between Surface Roughness of Plasma-Sprayed Chromium Oxide Coatings and Powder Grain Size Distribution: A Fractal Approach, Surf. Coat. Technol., 2004, 185(2-3), p 215-22110.1016/j.surfcoat.2004.01.018 ↗
36. R.B. Heimann, On the Self-Affine Fractal Geometry of Plasma-Sprayed Surfaces, J. Thermal Spray Technol., 2011, 20(4), p 898-90810.1007/s11666-011-9615-3 ↗
37. X. Qiao, Y.M. Wang, W.X. Weng, B.L. Liu, and Q. Li, Influence of Pores on Mechanical Properties of Plasma Sprayed Coatings: Case Study of YSZ Thermal Barrier Coating, Ceram. Int., 2018, 44(17), p 21564-2157710.1016/j.ceramint.2018.08.220 ↗
38. S. Vaidyanathan, Adaptive Control and Synchronization of a Rod-Type Plasma Torch Chaotic System Via Backstepping Control Method, Advances and Applications in Chaotic Systems. Studies in Computational Intelligence, S. Vaidyanathan and C. Volos, Ed., Springer, Berlin, 2016, p 553-57810.1007/978-3-319-30279-9_24 ↗
39. R.B. Heimann, A Model of Thermo-Diffusive Mass Transport in Geothermal Systems Using a Stability Theory Formalism, Appl. Geochem., 1987, 2(5–6), p 639-64710.1016/0883-2927(87)90016-3 ↗