journal article·2020-01

Effects of Gun Scanning Pattern on the Structure, Mechanical Properties and Corrosion Resistance of Plasma-Sprayed YSZ Coatings

Takuma Ohnuki, Seiji Kuroda, Hiroshi Araki, Xiaolong Chen, Makoto Watanabe, Yukihiro Sakamoto

Journal of Thermal Spray Technology· Volume 29· Issue 1-2
Publisher page

Abstract

Due to the non-symmetric distribution of sprayed particle plume in conventional plasma spraying caused by the radial injection of feedstock powder into a plasma jet, significant influence of the gun scanning pattern can appear in the structure of the sprayed coatings. Especially, the portion of poorly treated powder flux can be a cause of horizontal cracking as well as poor coating adhesion. In this study, three different scanning patterns of an air plasma spray gun were adopted with a commercial ZrO2-8 mass% Y2O3 (YSZ) powder. The cross sections of the obtained YSZ coatings were observed by SEM, while interfacial fracture toughness was measured by the indentation method, and hot corrosion testing was conducted. It was found that by modification of the gun scanning pattern, it is possible to decrease the possibility of horizontal weak bonding between spray passes and improve the coating adhesion and corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. P. Fauchais, A. Vardelle, and B. Dussoubs, Quo Vadis Thermal Spraying, J. Therm. Spray Technol., 2001, 10(1), p 44-6610.1361/105996301770349510 ↗
2. A. Vaidya, V. Srinivasan, T. Streibl, M. Friis, W. Chi, and S. Sampath, Process Maps for Plasma Spraying of Yttria-Stabilized Zirconia: An Integrated Approach to Design, Optimization and Reliability, Mater. Sci. Eng., A, 2008, 497(1–2), p 239-25310.1016/j.msea.2008.07.058 ↗
3. A. Vardelle, P. Fauchais, B. Dussoubs, and N.J. Themelis, Heat Generation and Particle Injection in a Thermal Plasma Torch, Plasma Chem. Plasma Process., 1998, 18(4), p 551-57410.1023/A:1021815417648 ↗
4. M. Vardelle, A. Vardelle, B. Dussoubs, P. Fauchais, T.J. Roemer, R.A. Neiser, and M.F. Smith, Influence of Injector Geometry on Particle Trajectories: Analysis of Particle Dynamics in the Injector and Plasma Jet, in Proceedings of the 15th International Thermal Spray Conference, vol 1, Nice, France, May 1998, p 887-89410.31399/asm.cp.itsc1998p0887 ↗
5. Z. Tang, A. Burgess, O. Kesler, B. White, and N. Ben-Oved, Manufacturing Solid Oxide Fuel Cells with an Axial-injection Plasma Spray System, in Thermal Spray 2007: Global Coating Solutions, Beijing, China, ASM International, May, 2007, p 309-31210.31399/asm.cp.itsc2007p0309 ↗
6. J. Colmenares-Angulo, K. Shinoda, K.T. Wentz, W. Zhang, Y. Tan, and S. Sampath, On the Response of Different Particle State Sensors to Deliberate Process Variations, J. Therm. Spray Technol., 2011, 20(5), p p1035-p104810.1007/s11666-011-9653-x ↗
7. G. Dwivedi, T. Wentz, S. Sampath, and T. Nakamura, Assessing Process and Coating Reliability Through Monitoring of Process and Design Relevant Coating Properties, J. Therm. Spray Technol., 2010, 19(4), p 695-71210.1007/s11666-009-9467-2 ↗
8. M. Friis, C. Persson, and J. Wigren, Influence of Particle In-Flight Characteristics on the Microstructure of Atmospheric Plasma Sprayed Yttria Stabilized ZrO2, Surf. Coat. Technol., 2001, 141(2–3), p 115-12710.1016/S0257-8972(01)01239-7 ↗
9. M. Karger, R. Vaßen, and D. Stöver, Atmospheric Plasma Sprayed Thermal Barrier Coatings with High Segmentation Crack Densities: Spraying Process, Microstructure and Thermal Cycling Behavior, Surf. Coat. Technol., 2011, 206(1), p 16-2310.1016/j.surfcoat.2011.06.032 ↗
10. H. Guo, S. Kuroda, and H. Murakami, Microstructures and Properties of Plasma-Sprayed Segmented Thermal Barrier Coatings, J. Am. Ceram. Soc., 2006, 89(4), p 1432-143910.1111/j.1551-2916.2005.00912.x ↗
11. K. Ito, H. Kuriki, H. Araki, S. Kuroda, and M. Enoki, Detection of Segmentation Cracks in Top Coat of Thermal Barrier Coatings during Plasma Spraying by Non-contact Acoustic Emission Method, Sci. Technol. Adv. Mater. 15(3), 035007 (2014)10.1088/1468-6996/15/3/035007 ↗
12. K. Ito, H. Kuriki, H. Araki, S. Kuroda, and M. Enoki, Evaluation of Generation Mechanism of Vertical Cracks in Top Coat of TBCs During APS Deposition by Laser AE Method, J. Therm. Spray Technol., 2015, 24(5), p 848-85610.1007/s11666-015-0247-x ↗
13. A. Hansbo and P. Nylén, Models for the Simulation of Spray Deposition and Robot Motion Optimization in Thermal Spraying of Rotating Objects, Surf. Coat. Technol., 1999, 122(2–3), p 191-20110.1016/S0257-8972(99)00255-8 ↗
14. D. Fang, S. Deng, H. Liao, and C. Coddet, The Effect of Robot Kinematics on the Coating Thickness Uniformity, J. Therm. Spray Technol., 2010, 19(4), p 796-80410.1007/s11666-010-9470-7 ↗
15. Z. Yanjun, L. Wenbo, L. Dayu, X. Jinkun, and Z. Chao, Modeling of Thickness and Profile Uniformity of Thermally Sprayed Coatings Deposited on Cylinders, J. Therm. Spray Technol., 2018, 27(3), p 288-29510.1007/s11666-017-0661-3 ↗
16. R.L. Jones, Some Aspects of the Hot Corrosion of Thermal Barrier Coating, J. Therm. Spray Technol., 1997, 6(1), p 77-8410.1007/BF02646315 ↗
17. J. Sniezewski, V. Vidal, P. Lours, and Y. Le Maoult, Thermal Barrier Coatings Adherence and Spallation: Interfacial Indentation Resistance and Cyclic Oxidation Behaviour Under Thermal Gradient, Surf. Coat. Technol., 2009, 204(6–7), p 807-81110.1016/j.surfcoat.2009.09.062 ↗
18. E.A. Brandes and G.B. Brook, Smithells Metals Reference Book, 7th ed., Butterworth-Heinemann Ltd., Oxford, 1992, p 15-23
19. S. Oki, Relationship Between Splat Morphology and Property of Plasma Sprayed Alumina Coatings, Mater. Sci. Forum, 2004, 449–452(II), p 925-92810.4028/www.scientific.net/MSF.449-452.925 ↗
20. G.Y. Lai, High-Temperature Corrosion and Materials Applications, ASM International, Materials Park, Ohio, 2007, p 32210.31399/asm.tb.htcma.9781627083041 ↗
21. J. Ilavsky, G.G. Long, A.J. Allen, and C.C. Berndt, Evolution of the Void Structure in Plasma-Sprayed YSZ Deposits During Heating, Mater. Sci. Eng. A, 1999, 272(1), p 215-22110.1016/S0921-5093(99)00450-5 ↗