Fabrication and Characterization of Plasma-Sprayed Cr3C2-25 Cr/Al2O3-40TiO2 Duplex Coating
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. C. Cui and W.A. Hou, Properties of Fe-based Amorphous Alloy Coatings with Al2O3-13% TiO2 Deposited by Plasma Spraying, Rare. Met. Mater. Eng., 2014, 43(11), p 2576-2579.10.1016/S1875-5372(15)60004-2 ↗
2. J. Sebastian, A. Scaria and D.G. Kurian, Development and Characterization of Alumina Coating by Atmospheric Plasma Spraying, Appl. Mech. Mater., 2018, 877, p 104-109.10.4028/www.scientific.net/AMM.877.104 ↗
3. M. Gell, E.H. Jordan, Y.H. Sohn, D. Goberman, L. Shaw and T.D. Xiao, Development and Implementation of Plasma Sprayed Nanostructured Ceramic Coatings, Surf. Coat. Tech., 2001, 146-147, p 48-54.10.1016/S0257-8972(01)01470-0 ↗
4. Z. Znamirowski, L. Pawlowski, T. Cichy and W. Czarczynski, Low Macroscopic Field Electron Emission from Surface of Plasma Sprayed and Laser Engraved TiO2, Al2O3+13TiO2 and Al2O3+40TiO2 Coatings, Surf. Coat. Tech., 2004, 187, p 37-46.10.1016/j.surfcoat.2004.01.001 ↗
5. Q. Liu, T. He, W.Y. Guo, Y. Bai, Y.S. Ma, Z.D. Chang, H.B. Liu, Y.X. Zhou, F. Ding, Y.W. Sun, Z.F. Han and J.J. Tang, Tribological Behavior of SAPS Sprayed Al2O3-TiO2 and NiCr-Cr3C2 Coatings Under Severe Load Conditions, Surf. Coat. Tech., 2019, 370, p 362-373.10.1016/j.surfcoat.2019.03.044 ↗
6. K.A. Habib, J.J. Saura, C. Ferrer, M.S. Damra, E. Gimenez and L. Cabedo, Comparison of Flame Sprayed Al2O3/TiO2 Coatings: Their Microstructure, Mechanical Properties and Tribology Behavior, Surf. Coat. Tech., 2006, 201(3-4), p 1436-1443.10.1016/j.surfcoat.2006.02.011 ↗
7. R. Tomaszek, L. Pawlowski, J. Zdanowski, J. Grimblot and J. Laureyns, Microstructural Transformations of TiO2, Al2O3+13TiO2 and Al2O3+40TiO2 at Plasma Spraying and Laser Engraving, Surf. Coat. Tech., 2004, 185(2-3), p 137-149.10.1016/j.surfcoat.2004.01.010 ↗
8. I.M. Kusoglu, E. Celik, H. Cetinel, I. Ozdemir, O. Demirkurt and K. Onel, Wear Behavior of Fame-Sprayed Al2O3-TiO2 Coatings on Plain Carbon Steel Substrates, Surf. Coat. Tech., 2005, 200(1-2), p 1173-1177.10.1016/j.surfcoat.2005.02.219 ↗
9. A.R.M. Sahab, N.H. Saad, S.K. Lang and J. Saedon, Impact of Plasma Spray Variables Parameters on Mechanical and Wear Behaviour of Plasma Sprayed Al2O3 3%wt TiO2 Coating in Abrasion and Erosion Application, Pro. Eng., 2012, 41, p 1689-1695.10.1016/j.proeng.2012.07.369 ↗
10. G. Mohammed, T. Basha, A. Srikanth and B. Venkateshwarlu, Effect of Reinforcement of Carbon Nanotubes on Air Plasma Sprayed Conventional Al2O3-3%TiO2 Ceramic Coatings, Mater. Today Proc., 2020, 20(2), p 191-194.10.1016/j.matpr.2019.11.025 ↗
11. X. Lin, Y. Zeng, C. Ding and P. Zhang, Effects of Temperature on Tribological Properties of Nanostructured and Conventional Al2O3–3 wt%TiO2 coatings, Wear, 2004, 256(11-12), p 1018-1025.10.1016/S0043-1648(03)00541-6 ↗
12. L. Xu and D. Wang, Grain Growth Characteristics of Plasma-Sprayed Nanostructured Al2O3-13wt%TiO2 Coatings during Laser Remelting, Ceram. Int., 2021, 47(11), p 15052-15058.10.1016/j.ceramint.2021.02.062 ↗
13. C. Chong and H. Weiao, Properties of Fe-based Amorphous Alloy Coatings with Al2O3-13%TiO2 Deposited by Plasma Spraying, Rare. Met. Mater. Eng, 2014, 43(11), p 2576-2579.10.1016/S1875-5372(15)60004-2 ↗
14. C. Zhang, B. Huang, J. Xu, W. Cao and S. Yin, Effect of Mo on Tribological Behaviors of Atmospheric Plasma Sprayed Al2O3-13%TiO2/Mo Coatings under Boundary Lubrication Condition, Ceram. Int., 2020, 46(10), p 15052-15058.10.1016/j.ceramint.2020.03.041 ↗
15. P. Manaee, Z. Valefi and M. Goodarz, The Effect of Bond Coat Type on the Stab Resistance of Al2O3–13 wt%TiO2 Plasma Sprayed Ceramic Coating on Aramid Fabrics, Surf. Int., 2020 https://doi.org/10.1016/j.surfin.2020.10043210.1016/j.surfin.2020.100432 ↗
16. Ş Yılmaz, M. Ipek, G.F. Celebi and C. Bindal, The Effect of Bond Coat on Mechanical Properties of Plasma-Sprayed Al2O3 and Al2O3–13wt%TiO2 Coatings on AISI 316L Stainless Steel, Vacuum, 2005, 77(3), p 315-321.10.1016/j.vacuum.2004.11.004 ↗
17. N.H.N. Yusoff, M.J. Ghazali, M.C. Isa, A.R. Daud and A. Muchtar, Effects of Powder Size and Metallic Bonding Layer on Corrosion Behaviour of Plasma-Sprayed Al2O3-13%TiO2 Coated Mild Steel in Fresh Tropical Seawater, Ceram. Int., 2013, 39(3), p 2527-2533.10.1016/j.ceramint.2012.09.012 ↗
18. J.A. Wahab, M.J. Ghazali, Z. Sajuri, Y. Otsuka and A.F.S. Baharin, Effects of Micro-Grooves on Tribological Behaviour of Plasma-Sprayed Alumina-13% Titania Coatings, Ceram. Int., 2017, 43(8), p 6410-6416.10.1016/j.ceramint.2017.02.052 ↗
19. M. Wang, Z. Zhou, Y. Yi and Z. Wang, Thermal-Shock Resistance of Plasma Sprayed Al2O3-13wt%TiO2 Coating Evaluated by Residual Strength Method, Surf. Coat. Tech., 2019, 375, p 888-893.10.1016/j.surfcoat.2019.07.062 ↗
20. Z. Zou, F. Zhou, L. Wang and Y. Wang, Tribological Property of Plasma-Sprayed Al2O3-13wt%TiO2 Coatings onto Resin-Based Composites, Appl. Surf. Sci., 2018, 431, p 75-80.10.1016/j.apsusc.2017.05.239 ↗
21. J. Zhang, J. He, Y. Dong, X. Li and D. Yan, Microstructure Characteristics of Al2O3–13wt%TiO2 Coating Plasma spray Deposited with Nanocrystalline Powders, J. Mater. Pro. Tech., 2008, 197(1-3), p 31-35.10.1016/j.jmatprotec.2007.06.001 ↗
22. Y. Wang, W. Tian, Y. Yang, C.G. Li and L. Wang, Investigation of Stress Field and Failure Mode of Plasma Sprayed Al2O3–13%TiO2 Coatings Under Thermal Shock, Mater. Sci. Eng. A, 2009, 516(1–215), p 103-110.10.1016/j.msea.2009.03.041 ↗
23. Y. Wang, W. Tian, T. Zhang and Y. Yang, Microstructure, Spallation and Corrosion of Plasma Sprayed Al2O3–13%TiO2 Coatings, Corr. Sci., 2009, 51(12), p 2924-2931.10.1016/j.corsci.2009.08.005 ↗
24. D. Yan, J. He, X. Li, Y. Liu and H. Liu, The Corrosion Behavior of Plasma-Sprayed Ni/Al–Al2O3 and Ni/Al–Al2O3+13 wt.% TiO2 Graded Ceramic Coatings in 5%HCl Solution, Surf. Coat. Tech., 2003, 176(1), p 30-36.10.1016/S0257-8972(03)00245-7 ↗
25. W. Aihua, Z. Beidi, T. Zengyi, M. Xianyao and Ch. Xudong, Thermal-Shock Behaviour of Plasma-Sprayed Al2O3-13wt.%TiO2 Coatings on Al-Si Alloy Influenced by Laser Remelting, Surf. Coat. Tech., 1993, 57, p 169-172.10.1016/0257-8972(93)90035-M ↗
26. N.H.N. Yusoff, M.J. Ghazali, M.C. Isa, A.R. Daud and S.M. Forghani, Optimization of Plasma Spray Parameters on the Mechanical Properties of Agglomerated Al2O3–13%TiO2 Coated Mild Steel, Mater. Des., 2012, 39, p 504-508.10.1016/j.matdes.2012.03.019 ↗
27. P. Bansal, N.P. Padture and A. Vasiliev, Improved Interfacial Mechanical Properties of Al2O3-13wt%TiO2 Plasma-Sprayed Coatings Derived from Nanocrystalline Powders, Act. Mater, 2003, 51(1011), p 2959-2970.10.1016/S1359-6454(03)00109-5 ↗
28. W. Tian, Y. Wang, Y. Yang and C. Li, Toughening and Strengthening Mechanism of Plasma Sprayed Nanostructured Al2O3–13wt.%TiO2 Coatings, Surf. Coat. Tech., 2009, 204(5), p 642-649.10.1016/j.surfcoat.2009.08.045 ↗
29. W. Tian, Y. Wang, T. Zhang and Y. Yang, Sliding Wear and Electrochemical Corrosion Behavior of Plasma Sprayed Nanocomposite Al2O3–13%TiO2 Coatings, Mater. Chem. Phys., 2009, 118(1), p 37-45.10.1016/j.matchemphys.2009.06.035 ↗
30. W. Tian, Y. Wang and Y. Yang, Fretting Wear Behavior of Conventional and Nanostructured Al2O3–13wt.%TiO2 Coatings Fabricated by Plasma Spray, Wear, 2008, 265(11-12), p 1700-1707.10.1016/j.wear.2008.04.012 ↗
31. D. Wang, Z. Tian, L. Shen, Z. Liu and Y. Huang, Microstructural Characteristics and Formation Mechanism of Al2O3–13wt% TiO2 Coatings Plasma-Sprayed with Nanostructured Agglomerated Powders, Surf. Coat. Tech., 2009, 203(10–11), p 1298-1303.10.1016/j.surfcoat.2008.10.027 ↗
32. Y. Wang, W. Tian and Y. Yang, Thermal Shock Behavior of Nanostructured and Conventional Al2O3/13wt.%TiO2 Coatings Fabricated by Plasma Spraying, Surf. Coat. Tech., 2007, 201(18), p 7746-7754.10.1016/j.surfcoat.2007.03.015 ↗
33. Y. Feng, J. Fang, J. Wu, K. Gu and P. Liu, Mechanical and Tribological Properties of Plasma Sprayed Graphene Nanosheets/Al2O3+13 wt%TiO2 Composite Coating, Tribol. Int., 2020, 146, p 106233. https://doi.org/10.1016/j.triboint.2020.10623310.1016/j.triboint.2020.106233 ↗
34. S. Mehar, S.G. Sapate, N. Vashishtha and P. Bagde, Effect of Y2O3 Addition on Tribological Properties of Plasma Sprayed Al2O3-13%TiO2 Coating, Ceram. Int., 2020, 46(8B), p 11799-11810.10.1016/j.ceramint.2020.01.214 ↗
35. A. Wahab and M.J. Ghazali, Erosion Resistance of Laser Textured Plasma-Sprayed Al2O3-13%TiO2 Coatings on Mild Steel, Wear, 2019, 432–433, 202937. https://doi.org/10.1016/j.wear.2019.20293710.1016/j.wear.2019.202937 ↗
36. A. Richter, L.M. Berger, Y.J. Sohn, S. Conze and R. Vaßen, Impact of Al2O3-40wt.%TiO2 Feedstock Powder Characteristics on the Sprayability, Microstructure and Mechanical Properties of Plasma Sprayed Coatings, J. Eur. Ceram. Soc., 2019, 39(16), p 5391-5402.10.1016/j.jeurceramsoc.2019.08.026 ↗
37. J. Sure, A.R. Shankar, B.N. Upadhyay and U.K. Mudali, Microstructural Characterization of Plasma Sprayed Al2O3-40wt%TiO2 Coatings on High Density Graphite with Different Post-Treatments, Surf. Coat. Tech., 2012, 206(23), p 4741-4749.10.1016/j.surfcoat.2012.01.058 ↗
38. H. Luo, P. Song, A. Khan, J. Feng and J.S. Lu, Alternant Phase Distribution and Wear Mechanical Properties of an Al2O3-40wt%TiO2 Composite Coating, Ceram. Int., 2017, 43(9), p 7295-7304.10.1016/j.ceramint.2017.03.029 ↗
39. H. Luo, P. Song, A. Khan, J. Feng and J.S. Lu, Effects of the Metal-Ceramic Transition Region on the Mechanical Properties and Crack Propagation behavior of an Al2O3-40wt%TiO2 Coating, Surf. Coat. Tech., 2017, 321, p 200-212.10.1016/j.surfcoat.2017.04.058 ↗
40. J.J. Kang, B.S. Xu, H.D. Wang and C.B. Wang, Influence of Spraying Parameters on the Microstructure and Properties of Plasma-sprayed Al2O3/40%TiO2 Coating, Phys. Proc., 2013, 50, p 169-176.10.1016/j.phpro.2013.11.028 ↗
41. T.S. Rajesh and R.V. Rao, Experimental Investigation and Parameter Optimization of Al2O3-40%TiO2 Atmospheric Plasma Spray Coating on SS316 Steel Substrate, Mater. Today Proc., 2018, 5(2–1), p 5012-5020.10.1016/j.matpr.2017.12.079 ↗
42. K. Yang, J. Li, Q. Wang, Z. Li, Y. Jiang and Y. Bao, Effect of Laser Remelting on Microstructure and Wear Resistance of Plasma Sprayed Al2O3-40%TiO2 Coating, Wear, 2019, 426–427(A), p 314-318.10.1016/j.wear.2019.01.100 ↗
43. S. Mehar, S.G. Sapate, N. Vashishtha, A. Rathod and P. Bagde, Investigation on Structural, Mechanical and Tribological Properties of Plasma Sprayed Al2O3-40%TiO2 Coating, Mater. Today Proc., 2021, 38(5), p 2525-2531.10.1016/j.matpr.2020.07.549 ↗
44. K.G. Girisha, K.V.S. Rao and C.D. Prasad, Slurry Erosion Resistance of Martenistic Stainless Steel with Plasma Sprayed Al2O3-40%TiO2 Coatings, Mater. Today Proc., 2018, 5(2), p 7388-7393.10.1016/j.matpr.2017.11.409 ↗
45. N.V. Tuan, N.T. Anh, L.T. Quy and P.T. Ha, Influence of Plasma Spraying Parameters on Microstructure and Corrosion Resistance of Cr3C2-25NiCr Cermet Carbide Coating, Anti-Corros. Methods Mater., 2019, 66(3), p 336-342.10.1108/ACMM-09-2018-2003 ↗
46. S. Ono, J.P. Brodholt and G.D. Price, First-Priciples Simulation of High Pressure Polymorphs in MgAl2O4, Phys. Chem. Min., 2008, 35, p 381-386.10.1007/s00269-008-0231-9 ↗
47. W.H. Baur and A.A. Khan, Rutile-Type Compounds. IV. SiO2, GeO2 and a comparison with other Rutile-Type structures, Acta. Crys., 1971, B21, p 2133-2139.10.1107/S0567740871005466 ↗
48. E.P. Song, J. Ahn, S. Lee and N.J. Kim, Microstructure and Wear Resistance of Nanostructured Al2O3–8wt.%TiO2 Coatings Plasma-Sprayed with Nanopowders, Surf. Coat. Tech., 2006, 201, p 1309-1315.10.1016/j.surfcoat.2006.01.052 ↗
49. R. Yilmaz, A.O. Kurt, A. Demir and Z. Tatli, Effects of TiO2 on the Mechanical Properties of the Al2O3–TiO2 Plasma Sprayed Coating, J. Eur. Ceram. Soc., 2007, 27(2-3), p 1319-1323.10.1016/j.jeurceramsoc.2006.04.099 ↗
50. S. Das, The Al-O-Ti (Aluminum-Oxygen-Titanium) System, J. Phas. Equilibria., 2002, 23(6), p 525-536.10.1361/105497102770331271 ↗
51. L.M. Berger, K. Sempf, Y. Sohn and R. Vaßen, Influence of Feedstock Powder Modification by Heat Treatments on the Properties of APS-Sprayed Al2O3-40%TiO2 Coatings, Therm. Spray Tech., 2018, 27, p 654-666.10.1007/s11666-018-0716-0 ↗
52. S. Hoffmann, S. Norberg and M. Yoshimura, Melt Synthesis of Al2TiO5 Containing Composites and Reinvestigation of the Phase Diagram Al2O3–TiO2 by Powder x-ray Diffraction, J. Electroceram., 2006, 16, p 327-330.10.1007/s10832-006-9873-5 ↗
53. F. Vargas, H. Ageorges, P. Fournier, P. Fauchais and M.E. López, Mechanical and Tribological Performance of Al2O3-TiO2 Coatings Elaborated by flame and Plasma Spraying, Surf. Coat. Tech., 2010, 205(4), p 1132-1136.10.1016/j.surfcoat.2010.07.061 ↗
54. A.F. Kanta, M.P. Planche and G. Montavon, Electrochemical Characterisations of Al2O3–13%TiO2 Coated by Atmospheric Plasma Spray, Plasma Chem. Plasma Process., 2011, 31, p 867-877.10.1007/s11090-011-9322-3 ↗
55. P.T. Ha, N.V. Tuan, N.T. Anh, P.T. Ly, D.B. Thuy, T.V. Trung and L.Q. Cuong, Cr3C2-25NiCr Cermet Coating: Preparation, PTFE Sealant, Wear and Corrosion Resistances, Therm. Spray Tech., 2021, 30, p 716-724.10.1007/s11666-021-01155-5 ↗
56. M. AkhtariZavareh, A.A.D.M. Sarhan, P. AkhtariZavareh, B.B.A. Razak, W.J. Basirun and M.B.C. Ismail, Development and Protection Evaluation of Two New, Advanced Ceramic Composite Thermal Spray Coatings, Al2O3–40TiO2 and Cr3C2–20NiCr on Carbon Steel Petroleum Oil Piping, Ceram. Int., 2016, 42(4), p 5203-5210.10.1016/j.ceramint.2015.12.044 ↗
57. F. Shao, K. Yang, H. Zhao, Ch. Liu, L. Wang and S. Tao, Effects of Inorganic Sealant and Brief Heat Treatments on Corrosion Behavior of Plasma Sprayed Cr2O3–Al2O3 Composite Ceramic Coatings, Surf. Coat. Tech., 2015, 276, p 8-15.10.1016/j.surfcoat.2015.06.045 ↗
58. M.E. Ozagem, B.Tribollet, Electrochemical Impedance Spectroscopy, The Electrochemical Society Series”, vol. 22, pp. 61-72. John Wiley and Sons (2008)
59. BT-Lab & EC-Lab, Data Analysis and Processes, Version 11.00, (2015), p.38.