journal article·2012-09

Dissolution of Plasma-Sprayed Wollastonite Coatings: The Effects of Microstructure Coupled with Stress

Weize Wang, Fuzhen Xuan, Jiachun Liang, Luobin Wang

Publisher page

Abstract

Wollastonite coatings are deposited on the U-shape titanium alloy coupons by atmospheric plasma spraying at substrate temperatures of room temperature and 400 °C, respectively. The effects of applied stresses and microstructure on the dissolution behavior of wollastonite coatings have been investigated. The dissolution rate is characterized by the ion concentration changes of Ca, Si, and P in the SBF solution. The coatings deposited at room temperature show higher porosity and lower crystallinity, and further higher dissolution rate is observed, compared with the coatings deposited at a substrate temperature of 400 °C. Applied tensile stresses promote the coating dissolution. The effect of compressive stresses on the dissolution of coatings depends on the balance between the hindrance effect and the promotion action caused by the debonding and/or peeling off. The stress condition cannot change the phase transformation process when the substrate crystal structure is adverse for the apatite precipitation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. F. D′Angelo, M. Molina, G. Riva, G. Zatti, P. Cherubino, Failure of Dual Radius Hydroxyapatite-Coated Acetabular Cups, J. Orthop. Surg., 2008, 3(35), doi: 10.1186/1749-799X-3-3510.1186/1749-799X-3-35 ↗
2. P. Chandra, M. Azzabi, J. Miles, M. Andrews, and J. Bradley, Furlong Hydroxyapatite-Coated Hip Prosthesis vs the Charnley Cemented Hip Prosthesis, J. Arthroplasty, 2010, 25(1), p 52-5710.1016/j.arth.2008.10.009 ↗
3. K.G. Nilsson, J. Karrholm, L. Carlsson, and T. Dalen, Hydroxyapatite Coatings Versus Cemented Fixation of the Tibial Component in Total Knee Arthroplasty: Prospective Randomized Comparison of Hydroxyapatite-Coated and Cemented Tibial Components with 5-Year Follow Up Using Radiostereometry, J. Arthroplasty, 1999, 14(1), p 9-2010.1016/S0883-5403(99)90196-1 ↗
4. J.A. Nychka, S.L.R. Mazur, S. Kashyap, D. Li, and F.Q. Yang, Dissolution of Bioactive Glasses: The Effects of Crystallinity Coupled with Stress, JOM, 2009, 61, p 45-5110.1007/s11837-009-0132-5 ↗
5. Q.Y. Zhang, J.Y. Chen, J.M. Feng, Y. Cao, C.L. Deng, and X.D. Zhang, Dissolution and Mineralization Behaviors of HA Coatings, Biomaterials, 2003, 24, p 4741-474810.1016/S0142-9612(03)00371-5 ↗
6. H. Li, B.S. Ng, K.A. Khor, P. Cheang, and T.W. Clyne, Raman Spectroscopy Determination of Phases Within Thermal Sprayed Hydroxyapatite Splats and Subsequent In Vitro Dissolution Examination, Acta Mater., 2004, 52, p 445-45310.1016/j.actamat.2003.09.046 ↗
7. R.Y. Whitehead, L.C. Lucas, and W.R. Lacefield, The Effect of Dissolution on Plasma Sprayed Hydroxyapatite Coatings on Titanium, Clin. Mater., 1993, 12, p 31-3910.1016/0267-6605(93)90025-3 ↗
8. M. Hamdi and A. Ide-Ektessabi, Dissolution Behavior of Simultaneous Vapor Deposited Calcium Phosphate Coatings In Vitro, Mater. Sci. Eng. C, 2007, 27, p 670-67410.1016/j.msec.2006.06.008 ↗
9. L. Cleries, J.M. Fernandez-Pradas, G. Sardin, and J.L. Morenza, Dissolution Behavior of Calcium Phosphate Coatings Obtained by Laser Ablation, Biomaterials, 1998, 19, p 1483-148710.1016/S0142-9612(98)00063-5 ↗
10. L. Sun, C.C. Berndt, K.A. Khor, H.N. Cheang, and K.A. Gross, Surface Characteristics and Dissolution Behavior of Plasma Sprayed Hydroxyapatite Coatings, J. Biomed. Mater. Res., 2002, 62, p 228-23610.1002/jbm.10315 ↗
11. E.M. Burke, J.D. Hanman, J.J. Weimer, A.B. Cheney, J.M. Rigsbee, and L.C. Lucas, Influence of Coating Strain on Calcium Phosphate Thin-Film Dissolution, J. Biomed. Mater. Res., 2001, 57, p 41-4710.1002/1097-4636(200110)57:1<41::AID-JBM1139>3.0.CO;2-9 ↗
12. Y. Han, K. Xu, and J. Lu, Dissolution Response of Hydroxyapatite Coatings to Residual Stress, J. Biomed. Mater. Res., 2001, 55, p 596-60210.1002/1097-4636(20010615)55:4<596::AID-JBM1053>3.0.CO;2-Y ↗
13. H. Plenk, C.B. Johansson, Jr., P. Roschberg, The Demineralization of Per Implant Bone Around Calcium-Phosphate Ceramics and Other Degrading Materials, Proceedings of the 4th European Ceramic Society Conference, E. Ravaglioli, Ed., Oct 2-6, 1995 (Faenza), Faenza Editrice Gruppo, 1995, p 295-300
14. K.A. Khor, L. Fu, V.J.P. Lim, and P. Cheang, The Effects of ZrO2 on the Phase Compositions of Plasma Sprayed HA/YSZ Composite Coatings, Mater. Sci. Eng. A, 2000, 276, p 160-16610.1016/S0921-5093(99)00495-5 ↗
15. X.Y. Liu and C.X. Ding, Study on Structure and Properties of Plasma Sprayed Wollastonite Coatings, J. Chin. Ceram. Soc., 2002, 30(1), p 20-25
16. X. Zhen, M. Huang, and C.X. Ding, Bond Strength of Plasma-Sprayed Hydroxyapatite/Ti Composite Coatings, Biomaterials, 2000, 21, p 841-84910.1016/S0142-9612(99)00255-0 ↗
17. W.C. Xue, X.Y. Liu, X.B. Zhang, and C.X. Ding, In Vivo Evaluation of Plasma-Sprayed Wollastonite Coating, Biomaterials, 2005, 26, p 3455-346010.1016/j.biomaterials.2004.09.027 ↗
18. T. Kokubo, H.M. Kim, and M. Kawashita, Novel Bioactive Materials with Different Mechanical Properties, Biomaterials, 2004, 24, p 2161-217510.1016/S0142-9612(03)00044-9 ↗
19. C. Zhang, Y. Leng, and X. Zhang, In Vitro Stability of Plasma-Sprayed Hydroxyapatite Coatings on Ti-6Al-4V Implants Under Cyclic Loading, J. Biomed. Mater. Res., 2000, 50, p 267-27510.1002/(SICI)1097-4636(200005)50:2<267::AID-JBM22>3.0.CO;2-7 ↗
20. A. Rakngarm and Y. Mutoh, Characterization and Fatigue Damage of Plasma Sprayed Hap Top Coat with Ti and HAp/Ti Bond Coating Layers on Commercially Pure Titanium Substrate, J. Mech. Behav. Biomed. Mater., 2009, 2, p 444-45310.1016/j.jmbbm.2008.11.001 ↗
21. X.Y. Liu and C.X. Ding, Morphology of Apatite Formed on Surface of Wollastonite Coating Soaked in Simulate Body Fluid, Mater. Lett., 2002, 57, p 652-65510.1016/S0167-577X(02)00848-0 ↗
22. W.Z. Wang, J.C. Liang, X.P. Guo, F.Z. Xuan, and H.X. Hong, Mechanical Properties and Dissolution Behavior of Plasma Sprayed Wollastonite Coatings Deposited at Different Substrate Temperatures, J. Therm. Spray Technol., 2012, 21(3), p 496-50410.1007/s11666-011-9699-9 ↗
23. L. Sun, C.C. Berndt, and C.P. Grey, Phase, Structural and Microstructural Investigations of Plasma Sprayed Hydroxyapatite Coatings, Mater. Sci. Eng. A, 2003, 360, p 70-8410.1016/S0921-5093(03)00439-8 ↗
24. M.F. Morks and A. Kobayashi, Effect of Gun Current on the Microstructure and Crystallinity of Plasma Sprayed Hydroxyapatite Coating, Appl. Surf. Sci., 2007, 253, p 7136-714210.1016/j.apsusc.2007.02.183 ↗
25. O. Peitl, E.D. Zanotto, and L.L. Hench, Highly Bioactive P2O5-Na2O-CaO-SiO2 Glass-Ceramics, J. Non-Cryst. Solids., 2001, 292, p 115-12610.1016/S0022-3093(01)00822-5 ↗
26. X.Y. Liu, C.X. Ding, and P.K. Chu, Mechanism of Apatite Formation on Wollastonite Coatings in Simulated Body Fluids, Biomaterials, 2004, 25, p 1755-176110.1016/j.biomaterials.2003.08.024 ↗
27. V. Sergo, O. Sbaizero, and D.R. Clarke, Mechanical and Chemical Consequences of the Residual Stresses in Plasma Sprayed Hydroxyapatite Coatings, Biomaterials, 1997, 18, p 477-48210.1016/S0142-9612(96)00147-0 ↗
28. Y.C. Yang and C.Y. Yang, The Influence of Residual Stress on the Shear Strength Between the Bone and Plasma-Sprayed Hydroxyapatite Coating, J. Mater. Sci. Mater. Med., 2008, 19, p 1051-106010.1007/s10856-007-3197-0 ↗
29. A.K. Lynn and D.L. DuQuesnay, Hydroxyapatite-Coated Ti-6Al-4V Part I: The Effect of Coating Thickness on Mechanical Fatigue Behavior, Biomaterials, 2002, 23, p 1937-194610.1016/S0142-9612(01)00321-0 ↗
30. W.Z. Wang, F.Z. Xuan, L. Wan, Q. Huang, S.T. Tu, Effect of Coating Thickness on Fatigue Behavior of Plasma-Sprayed Wollastonite Coating System, The Asian Thermal Spray Conference, C.J. Li, G.J. Yang, Ed., Oct 20-25, 2009 (Xi’an), Xi’an Jiao University Press, 2009, p 244-249
31. S.C. Wu, H.O. Zhang, Q. Tang, L. Chen, and G.L. Wang, Meshless Analysis of the Substrate Temperature in Plasma Spraying Process, Int. J. Therm. Sci., 2009, 48, p 674-68110.1016/j.ijthermalsci.2008.06.011 ↗