journal article·2024-12

Enhancing Fatigue Performance of Thermal Spray Coated Titanium Alloy by Shot Peening Before Grit Blasting

Xiao-Xue Dong, Jian-Zhang Lu, Zhao-Lu Zhang, Mei-Jun Liu, Guan-Jun Yang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Surface Treatment and Residual Stress · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. L. Wang, L. Zhou, L. Liu, W. He, X. Pan, X. Nie, S. Luo, Fatigue Strength Improvement in Ti-6Al-4V Subjected to Foreign Object Damage by Combined Treatment of Laser Shock Peening and Shot Peening, Int. J. Fatigue, 2022, 155, p 106581.10.1016/j.ijfatigue.2021.106581 ↗
2. Q. Yang, W. Zhou, X. Zheng, Z. Niu, Z. Li, B. Zou, X. Fu, Investigation of Shot Peening Combined with Plasma-Sprayed CuNiIn Coating on the Fretting Fatigue Behavior of Ti-6Al-4V Dovetail Joint Specimens, Surf. Coat. Technol., 2019, 358, p 833-842.10.1016/j.surfcoat.2018.12.006 ↗
3. Z. Sun, X. Ji, W. Zhang, L. Chang, G. Xie, H. Chang, L. Zhou, Microstructure Evolution and High Temperature Resistance of Ti6Al4V/inconel625 Gradient Coating Fabricated by Laser Melting Deposition, Mater. Des., 2020, 191, p 108644.10.1016/j.matdes.2020.108644 ↗
4. Z. Zhang, G. He, Enhancing Fatigue Performance of TiN-coated Ti-6Al-4V by N/Ti Ratio Modulation, Int. J. Fatigue, 2023, 176, p 107867.10.1016/j.ijfatigue.2023.107867 ↗
5. Y. Wang, X.-B. Liu, Y.-F. Liu, Y.-S. Luo, Y. Meng, Microstructure and Tribological Performance of Ni60-based Composite Coatings on Ti6Al4V Alloy with Different Ti3SiC2 Ceramic Additions by Laser Cladding, Ceram. Int., 2020, 46(18), p 28996-29010.10.1016/j.ceramint.2020.08.071 ↗
6. A. Moridi, S.M. Hassani-Gangaraj, S. Vezzú, L. Trško, M. Guagliano, Fatigue Behavior of Cold Spray Coatings: The Effect of Conventional and Severe Shot Peening as Pre-/post-treatment, Surf. Coat. Technol., 2015, 283, p 247-254.10.1016/j.surfcoat.2015.10.063 ↗
7. B. Arsenault, P. Gougeon, M. Verdier, D.L. Duquesnay, Aluminum Protective Coatings—fatigue and Bond Strength Properties with Respect to Surface Preparation Techniques: Laser Ablation, Shot Peening and Grit Blasting, Can. Metall. Q., 2013, 45(1), p 49-58.10.1179/cmq.2006.45.1.49 ↗
8. A. Cervellon, L.M. Ormastroni, Z. Hervier, T.M. Pollock, F. Pedraza, J. Cormier, Damage Mechanisms During Very High Cycle Fatigue of a Coated and Grit-blasted Ni-based Single-crystal Superalloy, Int. J. Fatigue, 2021, 142, p 105962.10.1016/j.ijfatigue.2020.105962 ↗
9. O. Yetik, H. Koçoğlu, Y.Y. Avcu, E. Avcu, T. Sınmazçelik, The Effects of Frit Size and Blasting Pressure on the Surface Properties of Grit Blasted Ti6Al4V Alloy, Mater. Today: Proc., 2020, 32, p 27-36.
10. X. Hu, J. Zhao, X. Teng, X. Nie, Y. Jiang, Y. Zhang, Fatigue Resistance Improvement on Double-sided Welded Joints of a Titanium Alloy Treated by Laser Shock Peening, J. Mater. Eng. Perform., 2022, 31(12), p 10304-10313.10.1007/s11665-022-07006-w ↗
11. X. Luo, Y. Wang, N. Dang, K. Tian, K. Wang, C. Zhao, X. Zha, X. Wang, Y. Yu, Gradient Microstructure and Foreign-object-damaged Fatigue Properties of Ti6Al4V Titanium Alloy Processed by the Laser Shock Peening and Subsequent Shot Peening, Mater. Sci. Eng. A, 2022, 849, p 143398.10.1016/j.msea.2022.143398 ↗
12. N. Maharjan, S.Y. Chan, T. Ramesh, P.G. Nai, D.T. Ardi, Fatigue Performance of Laser Shock Peened Ti6Al4V and Al6061-T6 Alloys, Fatigue Fract. Eng. Mater. Struct., 2020, 44(3), p 733-747.10.1111/ffe.13390 ↗
13. Y. Wang, Y. Zhang, G. Song, W. Niu, Z. Xu, C. Huang, Effect of Shot Peening on Fatigue Crack Propagation of Ti6Al4V, Mater. Today Commun., 2020, 25, p 101430.10.1016/j.mtcomm.2020.101430 ↗
14. Y. Lv, L. Lei, L. Sun, Effect of Shot Peening on the Fatigue Resistance of Laser Surface Melted 20CrMnTi Steel Gear, Mater. Sci. Eng. A, 2015, 629, p 8-15.10.1016/j.msea.2015.01.074 ↗
15. S. Bagherifard, Enhancing the Structural Performance of Lightweight Metals by Shot Peening, Adv. Eng. Mater., 2019, 21(7), p 1801140.10.1002/adem.201801140 ↗
16. C.H. Su, T.C. Chen, L.W. Tsay, Improved Fatigue Strength of Cr-electroplated 7075–T6 Al Alloy by Micro-shot Peening, Int. J. Fatigue, 2023, 167, p 107354.10.1016/j.ijfatigue.2022.107354 ↗
17. G.W. Lin, T.C. Chen, H.H. Hsu, L.W. Tsay, Synergetic Effects of Micro-shot Peening and Gas Nitriding on the Fatigue Performance of AISI 4140 Steel, Surf. Coat. Technol., 2024, 485, p 130856.10.1016/j.surfcoat.2024.130856 ↗
18. K. Yang, Q. Huang, B. Zhong, Q. Wang, Q. Chen, Y. Chen, N. Su, H. Liu, Enhanced Extra-Long Life Fatigue Resistance of a Bimodal Titanium Alloy by Laser Shock Peening, Int. J. Fatigue, 2020, 141, p 105868.10.1016/j.ijfatigue.2020.105868 ↗
19. J. Cizek, O. Kovarik, J. Siegl, K.A. Khor, I. Dlouhy, Influence of Plasma and Cold Spray Deposited Ti Layers on High-cycle Fatigue Properties of Ti6Al4V Substrates, Surf. Coat. Technol., 2013, 217, p 23-33.10.1016/j.surfcoat.2012.11.067 ↗
20. F. Yu, Y. Zhang, C. Kong, H. Yu, High Strength and Toughness of Ti–6Al–4V Sheets via Cryorolling and Short-Period Annealing, Mater. Sci. Eng. A, 2022, 854, p 143766.10.1016/j.msea.2022.143766 ↗
21. M.A. Miner, S. Monica, Calif, Cumulative Damage in Fatigue, Int. J. Appl. Mech., 1945, p 159-164.10.1115/1.4009458 ↗
22. F. Weber, H. Wu, P. Starke, A New Short-time Procedure for Fatigue Life Evaluation Based on the Linear Damage Accumulation by Palmgren-Miner, Int. J. Fatigue, 2023, 172, p 107653.10.1016/j.ijfatigue.2023.107653 ↗
23. X. Song, J. Everaerts, W. Zhai, H. Zheng, A.W.Y. Tan, W. Sun, F. Li, I. Marinescu, E. Liu, A.M. Korsunsky, Residual Stresses in Single Particle splat of Metal Cold Spray Process—Numerical Simulation and Direct Measurement, Mater. Lett., 2018, 230, p 152-156.10.1016/j.matlet.2018.07.117 ↗
24. J. Wu, H. Liu, P. Wei, C. Zhu, Q. Lin, Effect of Shot Peening Coverage on Hardness, Residual Stress and Surface Morphology of Carburized Rollers, Surf. Coat. Technol., 2020, 384, p 125273.10.1016/j.surfcoat.2019.125273 ↗
25. M. Avrami, Kinetics of Phase Change. I General Theory, J. Chem. Phys., 1939, 7(12), p 1103-1112.10.1063/1.1750380 ↗
26. T. Ghara, S. Paul, P.P. Bandyopadhyay, Effect of Grit Blasting Parameters on Surface and Near-surface Properties of Different Metal Alloys, J. Therm. Spray Technol., 2020, 30(1–2), p 251-269.
27. D. Kanesan, M.E. Mohyaldinn, N.I. Ismail, D. Chandran, C.J. Liang, An Experimental Study on the Erosion of Stainless Steel Wire Mesh Sand Screen using Sand Blasting Technique, J. Nat. Gas Sci. Eng., 2019, 65, p 267-274.10.1016/j.jngse.2019.03.017 ↗
28. P. Tawade, S. Shembale, S. Hussain, K. Sabiruddin, Effects of Different Grit Blasting Environments on the Prepared Steel Surface, J. Therm. Spray Technol., 2023, 32(5), p 1535-1553.10.1007/s11666-023-01585-3 ↗
29. A. Wennerberg, T. Albrektsson, J. Lausmaa, Torque and Histomorphometric Evaluation of c.p. Titanium Screws Blasted with 25- and 75-μm-Sized Particles of Al2O3, J. Biomed. Mater. Res., 1996, 30(2), p 251-260.10.1002/(SICI)1097-4636(199602)30:2<251::AID-JBM16>3.0.CO;2-P ↗
30. G. Ongtrakulkij, A. Khantachawana, J. Kajornchaiyakul, K. Kondoh, Effects of the Secondary Shot in the Double Shot Peening Process on the Residual Compressive Stress Distribution of Ti–6Al–4V, Heliyon, 2022, 8(1), p e08758.10.1016/j.heliyon.2022.e08758 ↗
31. B.K. Pant, A.H.V. Pavan, R.V. Prakash, M. Kamaraj, Effect of Laser Peening and Shot Peening on Fatigue Striations During FCGR Study of Ti6Al4V, Int. J. Fatigue, 2016, 93, p 38-50.10.1016/j.ijfatigue.2016.08.005 ↗
32. J. Wu, H. Liu, P. Wei, Q. Lin, S. Zhou, Effect of Shot Peening Coverage on Residual Stress and Surface Roughness of 18CrNiMo7-6 Steel, Int. J. Mech. Sci., 2020, 183, p 105785.10.1016/j.ijmecsci.2020.105785 ↗
33. M.S. Zoei, T. Farizeh, M.H. Sadeghi, M. Salehi, Residual Stress Distribution Through the Thickness of WC-10Co-4Cr Coating Deposited by HVOF: Experimental and Simulation Study, J. Therm. Spray Technol., 2020, 29(6), p 1351-1364.10.1007/s11666-020-01012-x ↗
34. S. Slawik, S. Bernarding, F. Lasagni, C. Navarro, A. Periñán, F. Boby, S. Migot-Choux, J. Dominguez, F. Microstructural Analysis of Selective Laser Melted Ti6Al4V Modified by Laser Peening and Shot Peening for Enhanced Fatigue Characteristics, Mater Charact, 2021, 173, p 110935.10.1016/j.matchar.2021.110935 ↗
35. S. Kikuchi, K. Minamizawa, J. Arakawa, H. Akebono, S. Takesue, M. Hayakawa, Combined Effect of Surface Morphology and Residual Stress Induced by Fine Particle and Shot peening on the Fatigue Limit for Carburized Steels, Int. J. Fatigue, 2023, 168, p 107441.10.1016/j.ijfatigue.2022.107441 ↗
36. Y. Bai, T. Guo, J. Wang, J. Gao, K. Gao, X. Pang, Stress-Sensitive Fatigue Crack Initiation Mechanisms of Coated Titanium Alloy, Acta Mater., 2021, 217, p 117179.10.1016/j.actamat.2021.117179 ↗
37. M. Multigner, E. Frutos, C.L. Mera, J. Chao, J.L. González-Carrasco, Interrogations on the Sub-Surface Strain Hardening of Grit Blasted Ti–6Al–4V Alloy, Surf. Coat. Technol., 2009, 203(14), p 2036-2040.10.1016/j.surfcoat.2009.02.003 ↗
38. D. Zhang, M. Wang, N. Jiang, Y. Liu, X. Yu, H. Zhang, Electrochemical Corrosion Behavior of Ni-Doped ZnO Thin Film Coated on Low Carbon Steel Substrate in 3.5% NaCl Solution, Int. J. Electrochem. Sci., 2020, 15(5), p 4117-4126.10.20964/2020.05.25 ↗
39. Y. Yamazaki, H. Fukanuma, N. Ohno, Effect of Interfacial Roughness of Bond Coat on the Residual Adhesion Strength of a Plasma Sprayed TBC System After Thermal Cycle Fatigue, J. Solid Mech. Mater. Eng., 2010, 4(2), p 196-207.10.1299/jmmp.4.196 ↗
40. A.H. Chern, P. Nandwana, R. McDaniels, R.R. Dehoff, P.K. Liaw, R. Tryon, C.E. Duty, Build Orientation, Surface Roughness, and Scan Path Influence on the Microstructure, Mechanical Properties, and Flexural Fatigue Behavior of Ti–6Al–4V Fabricated by Electron Beam Melting, Mater. Sci. Eng. A, 2020, 772, p 138740.10.1016/j.msea.2019.138740 ↗
41. S. Sarkar, C.S. Kumar, A.K. Nath, Effects of Different Surface Modifications on the Fatigue Life of Selective Laser Melted 15–5PH Stainless Steel, Mater. Sci. Eng. A, 2019, 762, p 138109. https://doi.org/10.1016/j.msea.2019.13810910.1016/j.msea.2019.138109 ↗
42. Z. Zhang, J. Chen, G. He, G. Yang, Fatigue and Mechanical Behavior of Ti-6Al-4V Alloy with CrN and TiN Coating Deposited by Magnetic Filtered Cathodic Vacuum Arc Process, Coatings, 2019, 9(10), p 689. https://doi.org/10.3390/coatings910068910.3390/coatings9100689 ↗
43. Z. Zhang, Y. Zhang, Z. Zhang, G. He, Effect of Brittle TiN Coating on Fatigue Performance of TC11 Titanium Alloy Under Rotating Bending and Tension-Tension, J. Alloys Compd., 2023, 968, p 172163. https://doi.org/10.1016/j.jallcom.2023.17216310.1016/j.jallcom.2023.172163 ↗
44. L. Wu, Z. Jiao, H. Yu, Study on Fatigue Crack Growth Behavior of Selective Laser-Melted Ti6Al4V Under Different Build Directions, Stress Ratios, and Temperatures, Fatigue Fract. Engng. Mater. Struct., 2022, 45(5), p 1421-1434.10.1111/ffe.13670 ↗
45. M. Gui, R. Eybel, B. Asselin, F. Monerie-Moulin, Cracking and Spalling Behavior of HVOF Thermally Sprayed WC-Co-Cr Coating in Bend and Axial Fatigue Tests, J. Mater. Eng. Perform., 2015, 24(3), p 1347-1356.10.1007/s11665-014-1378-9 ↗
46. V.P. Nguyen, T.N. Dang, C.C. Le, D.-A. Wang, Effect of Coating Thickness on Fatigue Behavior of AISI 1045 Steel with HVOF Thermal Spray and Hard Chrome Electroplating, J. Therm. Spray Technol., 2020, 29(8), p 1968-1981.10.1007/s11666-020-01090-x ↗
47. M.R. Khosravani, P. Soltani, T. Reinicke, Fracture and Structural Performance of Adhesively Bonded 3D-Printed PETG Single Lap Joints Under Different Printing Parameters, Theor. Appl. Fract. Mech., 2021, 116, p 103087. https://doi.org/10.1016/j.tafmec.2021.10308710.1016/j.tafmec.2021.103087 ↗
48. H. Li, C. Li, H. Yuan, Prediction of Fatigue Crack Growth Retardation Using a Cyclic Cohesive Zone Model, Arch. Appl. Mech., 2017, 87(6), p 1061-1075.10.1007/s00419-017-1232-2 ↗
49. Y. Bai, Y. Xi, K. Gao, H. Yang, X. Pang, X. Yang, A.A. Volinsky, Brittle Coating Effects on Fatigue Cracks Behavior in Ti Alloys, Int. J. Fatigue, 2019, 125, p 432-439.10.1016/j.ijfatigue.2019.04.017 ↗
50. X. Shi, W. Zeng, Y. Sun, Y. Han, Y. Zhao, P. Guo, Microstructure-Tensile Properties Correlation for the Ti-6Al-4V Titanium Alloy, J. Mater. Eng. Perform., 2015, 24(4), p 1754-1762.10.1007/s11665-015-1437-x ↗
51. M. Kasemer, R. Quey, P. Dawson, The Influence of Mechanical Constraints Introduced by β Annealed Microstructures on the Yield Strength and Ductility of Ti-6Al-4V, J. Mech. Phys. Solids, 2017, 103, p 179-198.10.1016/j.jmps.2017.03.013 ↗
52. Y. Madhavi, L. Rama Krishna, N. Narasaiah, Influence of Micro arc Oxidation Coating Thickness and Prior Shot Peening on the Fatigue Behavior of 6061-T6 Al Alloy, Int. J. Fatigue, 2019, 126, p 297-305. https://doi.org/10.1016/j.ijfatigue.2019.05.01310.1016/j.ijfatigue.2019.05.013 ↗
53. M.Y.P. Costa, M.L.R. Venditti, M.O.H. Cioffi, H.J.C. Voorwald, V.A. Guimarães, R. Ruas, Fatigue Behavior of PVD Coated Ti–6Al–4V Alloy, Int. J. Fatigue, 2011, 33(6), p 759-765.10.1016/j.ijfatigue.2010.11.007 ↗