journal article·2013-03

Simplified Model for Description of HVOF NiCr Coating Properties Through Experimental Design and Diagnostic Measurements

D. Zois, T. Wentz, R. Dey, S. Sampath, C. M. Weyant

Journal of Thermal Spray Technology· Volume 22· Issue 2-3
Publisher page

Abstract

The use of factorial design in process parameter development allowed determination of the contribution of key process variables, such as flame energy (combustion pressure and O2/F), spray distance, and feed rate, on in-flight particle properties. The significance of each parameter was used to construct a simple model which enabled the description of particles’ temperature and velocity. Particles with velocities ranging by as much as 300 m/s and temperatures ranging up to 350 °C were used to produce an array of coatings on an in situ curvature sensor enabling the determination of the evolving—during spraying—and residual stress at the end of the process, correspondingly. These diverse particle states combined with the flame impingement on the substrate, resulted in coatings of similar thickness, but significantly different stress states. Real time evolving stresses—during deposition—and coating properties such as, microhardness, modulus, and corrosion behavior were correlated to particle in-flight properties and, via the use of the introduced model, to spray parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. T.W. Clyne and S.C. Gill, Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work, J. Therm. Spray Technol., 1996, 5(4), p 401-41810.1007/BF02645271 ↗
2. J. Matejicek, S. Sampath, D. Gilmore, and R. Neiser, In-situ Measurement of Residual Stresses and Elastic Moduli in Thermal Sprayed Coatings. Part 2: Processing Effects on Properties of Mo Coatings, Acta Mater., 2003, 51, p 873-88510.1016/S1359-6454(02)00477-9 ↗
3. Y.C. Tsui and T.W. Clyne, An Analytical Model for Predicting Residual Stresses in Progressively Deposited Coatings. Part 1: Planar Geometry, Thin Solid Films, 1997, 306, p 23-3310.1016/S0040-6090(97)00199-5 ↗
4. S. Sampath, X. Jiang, A. Kulkarni, J. Matejicek, D.L. Gilmore, and R.A. Neiser, Development of Process Maps for Plasma Spray: Case Study for Molybdenum, Mater. Sci. Eng. A, 2003, 348, p 54-6610.1016/S0921-5093(02)00642-1 ↗
5. S. Kuroda, T. Dendo, and S. Kitahara, Quenching Stress in Plasma Sprayed Coatings and Its Correlation with the Deposit Microstructure, J. Therm. Spray Technol., 1995, 4(1), p 75-8410.1007/BF02648531 ↗
6. E. Dongmo, M. Wenzelburger, and R. Gadow, Analysis and Optimization of the HVOF Process by Combined Experimental and Numerical Approaches, Surf. Coat. Technol., 2008, 202, p 4470-447810.1016/j.surfcoat.2008.04.029 ↗
7. S. Kuroda, Y. Tashiro, H. Yumoto, S. Taira, H. Fukanuma, and S. Tobe, Peening Action and Residual Stresses in High-Velocity Oxygen Fuel Thermal Spraying of 316L Stainless Steel, J. Therm. Spray Technol., 2001, 10(2), p 367-37410.1361/105996301770349457 ↗
8. A. Valarezo, W.B. Choi, W. Chi, A. Gouldstone, and S. Sampath, Process Control and Characterization of NiCr Coatings by HVOF-DJ2700 System: A Process Map Approach, J. Therm. Spray Technol., 2010, 19(5), p 852-86510.1007/s11666-010-9492-1 ↗
9. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, Wiley, Chichester, 1995
10. B. Rajasekaran, G. Mauer, R. Vaßen, A. Röttger, S. Weber, and W. Theisen, Thick Tool Steel Coatings Using HVOF Spraying for Wear Resistance Applications, Surf. Coat. Technol., 2010, 205, p 2449-245410.1016/j.surfcoat.2010.09.041 ↗
11. J. Saaedi, T.W. Coyle, H. Arabi, S. Mirdamadi, and J. Mostaghimi, Effects of HVOF Process Parameters on the Properties of Ni-Cr Coatings, J. Therm. Spray Technol., 2010, 19(3), p 521-53010.1007/s11666-009-9464-5 ↗
12. C.M. Hackett, G.S. Settles, and J.D. Miller, On the Gas Dynamics of HVOF Thermal Sprays, Proceedings of the 1993 National Thermal Spray Conference, C.C. Berndt and T.F. Bernecki, Ed., 7-11 June 1993, Anaheim, CA, p 167-172
13. Y. Ishikawa, J. Kawakita, S. Osawa, T. Itsukaichi, Y. Sakamoto, M. Takaya, and S. Kuroda, Evaluation of Corrosion and Wear Resistance of Hard Cermet Coatings Sprayed by Using an Improved HVOF Process, J. Therm. Spray Technol., 2005, 14(3), p 384-39010.1361/105996305X59378 ↗
14. X.C. Zhang, B.S. Xu, Y.X. Wu, F.Z. Xuan, and S.T. Tu, Porosity, Mechanical Properties, Residual Stresses of Supersonic Plasma-sprayed Ni-based Alloy Coatings Prepared at Different Powder Feed Rates, Appl. Surf. Sci., 2008, 254(13), p 3879-388910.1016/j.apsusc.2007.12.023 ↗
15. E. Lugscheider, C. Herbst, and L. Zhao, Parameter Studies on High-Velocity Oxy-Fuel Spraying of MCrAlY Coatings, Surf. Coat. Technol., 1998, 108-109, p 16-2310.1016/S0257-8972(98)00630-6 ↗
16. G.G. Stoney, The Tension of Metallic Films Deposited by Electrolysis, Proc. R. Soc. Lond. A, 1909, 82, p 172-17510.1098/rspa.1909.0021 ↗
17. M.S. Phadke, Quality Engineering Using Robust Design, Englewood Cliffs, PTR Prentice Hall, 1989
18. D. Zois, A. Lekatou, M. Vardavoulias, T. Vaimakis, and A.E. Karantzalis, Partially Amorphous Stainless Steel Coatings: Microstructure, Annealing Behaviour and Statistical Optimization of Spray Parameters, Surf. Coat. Technol., 2011, 206, p 1469-148310.1016/j.surfcoat.2011.09.023 ↗
19. W.C. Oliver and G.M. Pharr, Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology, J. Mater. Res., 2004, 19(1), p 3-2010.1557/jmr.2004.19.1.3 ↗
20. A.D. Mah, Heats of Formation of Chromium Oxide and Cadmium Oxide from Combustion Calorimetry, J. Am. Chem. Soc., 1954, 76(13), p 3363-336510.1021/ja01642a002 ↗
21. A. Vaidya, T. Streibl, L. Li, S. Sampath, O. Kovarik, and R. Greenlaw, An Integrated Study of Thermal Spray Process-Structure-Property Correlations: A Case Study for Plasma Sprayed Molybdenum Coatings, Mater. Sci. Eng. A, 2005, 403, p 191-20410.1016/j.msea.2005.04.056 ↗
22. R. Ghafouri-Azar, J. Mostaghimi, and S. Chandra, Modeling Development of Residual Stresses in Thermal Spray Coatings, Comp. Mater. Sci., 2006, 35, p 13-2610.1016/j.commatsci.2005.02.007 ↗
23. A. Itoh, M. Hirata, and M. Ayagaki, Effects of Substrate Temperature During Spraying on the Properties of Sprayed Coatings, Proceedings of the 1993 National Thermal Spray Conference, C.C. Berndt and T.F. Bernecki, Ed., 7-11 June 1993, Anaheim, CA, p 593-600
24. V.V. Sobolev and J.M. Guilemany, Effect of Substrate Deformation on Droplet Flattening in Thermal Spraying, Mater. Lett., 1998, 35, p 324-32810.1016/S0167-577X(97)00264-4 ↗
25. S. Kuroda, Properties and Characterization of Thermal Sprayed Coatings-A Review of Recent Research Progress, Thermal Spray, Meeting the Challenges of the 21st Century, Proceedings of the 15th International Thermal Spray Conference, C. Coddett, Ed., 25-29 May 1998, France, ASM International, p 539-55010.31399/asm.cp.itsc1998p0539 ↗
26. R. McPherson, A Review of Microstructure and Properties of Plasma Sprayed Ceramic Coatings, Surf. Coat. Technol., 1981, 39(40), p 173-181
27. E.E. Stansbury and R.A. Buchanan, Fundamentals of Electrochemical Corrosion, ASM international, Materials Park, 200010.31399/asm.tb.fec.9781627083027 ↗