journal article·2017-01

Effect of Sulfur Acid Corrosion on the Luminescent Intensity of Plasma-Sprayed YAG:Ce Coatings

Weize Wang, Peng Zeng, Hehui Wang, Jingye Yu, Liangmin Wu

Journal of Thermal Spray Technology· Volume 26· Issue 1-2
Publisher page

Abstract

In order to monitor the corrosion condition of components, plasma-sprayed YAG:Ce coating was prepared for the detection, which could develop the application of plasma spraying. The effect of sulfuric acid corrosion on the microstructure, phase composition and luminescence intensity of coatings was studied. The powder was synthesized by the high-temperature solid-state method. Microstructure and phases were characterized through using SEM and XRD, respectively. Effect of immersion time in the acid was studied on the luminescence intensity. It was found that the phase composition of the powder was dominated by YAG (Y3Al5O12). More pores could be observed in coatings with the increase in immersion time. Sprayed coatings mainly included phases of YAG and YAP (YAlO3). The position of the XRD peaks of coatings was changing during the immersion. The luminescence intensity showed the fluctuation tendency with the immersion time, which related to the coating porosity, phase composition and the migration of the diffract peak.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · High-Temperature Coating Behaviors · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. P.P. Alvisi and V.F.C. Lins, An Overview of Naphthenic Acid Corrosion in a Vacuum Distillation Plant, Eng. Fail. Anal., 2011, 18, p 1403-140610.1016/j.engfailanal.2011.03.019 ↗
2. A. Foudazi, M.T. Ghasr, and K.M. Donnell, Characterization of Corroded Reinforced Steel Bars by Active Microwave Thermography, IEEE Trans. Instrum. Meas., 2015, 64, p 2583-258510.1109/TIM.2015.2450353 ↗
3. J. Buck, P.R. Underhill, and S.G. Mokros, Pulsed Eddy Current Inspection of Support Structures in Steam Generators, IEEE Sens. J., 2015, 15, p 4305-431210.1109/JSEN.2015.2418220 ↗
4. F. Alireza and S. Salvatore, Reference-Free Corrosion Damage Diagnosis in Steel Strands Using Guided Ultrasonic Waves, Ultrasonics, 2015, 57, p 208-647
5. R.W. Puls, D.W. Blowes, and R.W. Gillham, Long-term Performance Monitoring for a Permeable Reactive Barrier at the US Coast Guard Support Center, Elizabeth City, North Carolina, J. Hazard. Mater., 1999, 68, p 109-12410.1016/S0304-3894(99)00034-5 ↗
6. I. Lenartova, J. Galland, and M. Tvrdy, Hydrogen Embrittlement for Austenitic Alloys: Behaviour of Microstructure and Segregation of Sulphur and Phosphorus Impurities, Rev. Metall. Paris, 1999, 96, p 243-25110.1051/metal/199996020243 ↗
7. X. Cao, H. Deng, W. Lan, and P. Cao, Electrochemical Investigation on Atmospheric Corrosion of Carbon Steel Under Different Environmental Parameters, Anti-Corros. Methods Mater., 2013, 60, p 199-20510.1108/ACMM-Apr-2012-1170 ↗
8. C. Muratorea, D.R. Clarke, and J.G. Jones, Smart Tribological Coatings with Wear Sensing Capability, Wear, 2008, 256, p 913-92010.1016/j.wear.2008.02.003 ↗
9. J.I. Eldridge and T.J. Bencic, Monitoring Delamination of Plasma-Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2006, 201, p 3926-393010.1016/j.surfcoat.2006.08.008 ↗
10. W.Z. Wang, H. Hong, J. Wei, and F. Xuan, Effect of Plasma Spraying Parameters on the Luminescent Intensity of YSZ:Tm Coatings, Rare Metal. Mater. Eng., 2014, 43, p 481-484
11. S.M. Li, H.R. Zhang, and J.H. Liu, Preparation and Performance of Fluorescent Sensing Coating for Monitoring Corrosion of Al Alloy 2024, Trans. Nonferrous Metals Soc., 2006, 16, p 159-16410.1016/S1003-6326(06)60028-9 ↗
12. W.Z. Wang, J. Wei, H. Hong, F. Xuan, and Y. Shan, Effect of Processing and Service Conditions on the Luminescence Intensity of Plasma Sprayed (Tm3++ Dy3+) Co-doped YSZ Coatings, J. Alloys Compd., 2014, 584, p 136-14110.1016/j.jallcom.2013.08.046 ↗
13. S. Kuck, U. Pohlmann, K. Petermann, G. Huber, and T. Schonerr, High Resolution Spectroscopy of Cr4+ Doped Y3Al5O12, J. Lumin., 1994, 60, p 192-19610.1016/0022-2313(94)90127-9 ↗
14. H.M. Lee, C.C. Cheng, and C.Y. Huang, The Synthesis and Optical Property of Solid-State-Prepared YAG:Ce Phosphor by a Spray-Drying Method, Mater. Res. Bull., 2008, 44, p 1081-1085
15. X. Yi, S. Zhou, C. Chen, H. Lin, Y. Feng, K. Wang, and Y. Ni, Fabrication of Ce:YAG, Ce, Cr:YAG and Ce:YAG/Ce, Cr:YAG Dual-Layered Composite Phosphor Ceramics for the Application of White LEDs, Ceram. Int., 2014, 5, p 7043-704710.1016/j.ceramint.2013.12.034 ↗
16. A. Revaux, G. Dantelle, D. Decanini, A. Haghiri-Gosnet, T. Gacoin, and J. Boilot, Synthesis of YAG:Ce/TiO2 Nanocomposite Films, Opt. Mater., 2011, 33, p 1124-112710.1016/j.optmat.2010.07.022 ↗
17. J. Tous, M. Horvath, L. Pina, K. Blazek, and B. Sopko, High-Resolution Application of YAG:Ce and LuAG:Ce Imaging Detectors with a CCD x-ray Camera, Nucl. Instrum. Methods A, 2008, 11, p 264-26710.1016/j.nima.2008.03.070 ↗
18. K. Zhang, H. Liu, and Y. Wu, Co-precipitation Synthesis and Luminescence Behavior of Ce-Doped Yttrium Aluminum Garnet (YAG:Ce) Phosphor: The Effect of Precipitant, J. Alloys Compd., 2008, 453, p 265-27010.1016/j.jallcom.2006.11.101 ↗
19. B.Y. Zhao, X. Liang, Z. Chen, C. Xie, L. Luo, and Z. Zhang, Studies on Optical Properties and Ce Concentration of Ce:YAG Single Crystal for WLEDs, Chem. J. Chin. Univ., 2014, 25, p 230-236
20. G. Zeng, Defeats in Doped YAG Crystal, J. Synth. Cryst., 1999, 4, p 354-358
21. K. Gross, C.C. Berndt, and H. Herman, Amorphous Phase Formation in Plasma-Sprayed Hydroxyapatite Coatings, J. Biomed. Mater. Res., 1998, 39(3), p 407-41410.1002/(SICI)1097-4636(19980305)39:3<407::AID-JBM9>3.0.CO;2-N ↗
22. W.Z. Wang, J. Liang, X. Guo, F. Xuan, and H. Hong, Mechanical Properties and Dissolution Behavior of Plasma Sprayed Wollastonite Coatings Deposited at Different Substrate Temperatures, J. Therm. Spray Technol., 2010, 21, p 496-50410.1007/s11666-011-9699-9 ↗
23. R. Mcpherson, A Model for the Thermal Conductivity of Plasma-Sprayed Ceramic Coatings, Thin Solid Films, 1984, 112, p 89-9510.1016/0040-6090(84)90506-6 ↗
24. A. Ohmori and C.J. Li, Quantitative Characterization of the Structure of Plasma-Sprayed Al2O3 Coating by Using Copper Electroplating, Thin Solid Films, 1991, 201, p 241-25210.1016/0040-6090(91)90114-D ↗
25. Q. Li, L. Gao, and D.S. Yan, Enhancement of the Luminescent Intensity of Nano-scale Y2O3:Eu3+ Powders, J. Inorg. Mater., 1998, 13(6), p 899-903
26. W.T. Lin and Y.C. Wu, One-Pot Synthesis of Submicrometer-Sized Ce:YAG Spherical Particles by Solvothermal Process Using Alcohol Solvents, J. Am. Ceram. Soc., 2015, 98, p 2754-275910.1111/jace.13695 ↗
27. J. Matejicek, S. Houdkova, O. Blahova, and Z. Pala, The Influence of Spraying Parameters on Stresses and Mechanical Properties of HVOF-Sprayed Co–Cr–W–C Coatings, Key Eng. Mater., 2014, 606, p 171-17410.4028/www.scientific.net/KEM.606.171 ↗
28. P.S. Kumaran, S. Seetharamu, R.K. Kumar, S. Vynatheya, T. Pasang, M.V. Rao, and C. Ranganathaiah, Influence of Plasma Spray and HVOF Coatings using Advanced Techniques on the Mechanical Properties, Int. J. Emerg. Technol. Adv. Eng., 2014, 4, p 647-655
29. O. Kesler, J. Materjicek, S. Sampath, S. Suresh, T. Gnaeupel-Herold, P.C. Brand, and H.J. Prask, Measurement of Residual Stress in Plasma-Sprayed Metallic, Ceramic and Composite Coatings, Mater. Sci. Eng., A, 1998, 257, p 215-22410.1016/S0921-5093(98)00860-0 ↗