Solution Precursor Plasma Spraying of Cr-Doped Al2O3 Thermochromic Coatings
Source abstract
Abstract
Solution precursor plasma spraying (SPPS) presents a modern route to deposit coatings directly from liquid feedstock. In this study, unique ability of SPPS to intermix different precursors on the atomic scale was employed to deposit pure and Cr-doped Al2O3 (technically, synthetic ruby) from several mixtures of aluminum and chromium nitrates. Highly porous coatings (> 60% porosity) were deposited by high-enthalpy WSP-H torch. Homogeneous distribution of Cr atoms in Al2O3 resulted in coatings color ranging from pink to grayish-green correlated with increasing Cr content and change of lattice parameters as observed by x-ray diffraction. High content of over 80 wt.% of α-alumina phase was reached for all coatings. For the Cr-doped Al2O3 coatings, distinct and fully reversible thermochromic behavior was observed by temperature-resolved colorimetry. Further increase in α-phase content (up to 95 wt.%) and coating densification were achieved by additional surface remelting by plasma torch.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. X. Ma and P. Ruggiero, Practical Aspects of Suspension Plasma Spray for Thermal Barrier Coatings on Potential Gas Turbine Components, J. Therm. Spray Technol., 2018, 27(4), p 1-1210.1007/s11666-018-0700-8 ↗
2. J. Smith, N. Shores, J. Scheibel, D. Classen, S. Paschke, S. Elbel, K. Fick, and D. Carlson, Thermal Barrier Coating Validation Testing for Industrial Gas Turbine Combustion Hardware, J. Eng. Gas Turbine Power, 2016, 138(March), p 1-7
3. G. Darut, F. Ben-Ettouil, A. Denoirjean, G. Montavon, H. Ageorges, and P. Fauchais, Dry Sliding Behavior of Sub-Micrometer-Sized Suspension Plasma Sprayed Ceramic Oxide Coatings, J. Therm. Spray Technol., 2010, 19(1-2), p 275-28510.1007/s11666-009-9415-1 ↗
4. T.P.S. Sarao, H. Singh, and H. Singh, Enhancing Biocompatibility and Corrosion Resistance of Ti-6Al-4V Alloy by Surface Modification Route, J. Therm. Spray Technol., 2018, 27(8), p 1388-1400. https://doi.org/10.1007/s11666-018-0746-710.1007/s11666-018-0746-7 ↗
5. J. Cizek, V. Brozek, T. Chraska, F. Lukac, J. Medricky, R. Musalek, T. Tesar, F. Siska, Z. Antos, J. Cupera, M. Matejkova, Z. Spotz, S. Houdkova, and M. Kverka, Silver-Doped Hydroxyapatite Coatings Deposited by Suspension Plasma Spraying, J. Therm. Spray Technol., 2018, 27(8), p 1333-1343. https://doi.org/10.1007/s11666-018-0767-210.1007/s11666-018-0767-2 ↗
6. P.L. Fauchais, J.V.R. Heberlein, and M.I. Boulos, Thermal Spray Fundamentals, Springer, Berlin, 2014, https://doi.org/10.1007/978-0-387-68991-310.1007/978-0-387-68991-3 ↗
7. N. Curry, K. VanEvery, T. Snyder, and N. Markocsan, Thermal Conductivity Analysis and Lifetime Testing of Suspension Plasma-Sprayed Thermal Barrier Coatings, Coatings, 2014, 4(3), p 630-650. https://doi.org/10.3390/coatings403063010.3390/coatings4030630 ↗
8. M. Gell, L. Xie, E.H. Jordan, and N.P. Padture, Mechanisms of Spallation of Solution Precursor Plasma Spray Thermal Barrier Coatings, Surf. Coat. Technol., 2004, 188-189(1-3 SPEC.ISS.), p 101-10610.1016/j.surfcoat.2004.08.004 ↗
9. V.E. Oliker, A.E. Terent’Ev, L.K. Shvedova, and I.S. Martsenyuk, Use of Aqueous Suspensions in Plasma Spraying of Alumina Coatings, Powder Metall. Met. Ceram., 2009, 48(1-2), p 115-12010.1007/s11106-009-9085-z ↗
10. K. VanEvery, M.J.M. Krane, R.W. Trice, H. Wang, W. Porter, M. Besser, D. Sordelet, J. Ilavsky, and J. Almer, Column Formation in Suspension Plasma-Sprayed Coatings and Resultant Thermal Properties, J. Therm. Spray Technol., 2011, 20, p 817-82810.1007/s11666-011-9632-2 ↗
11. E.H. Jordan, C. Jiang, and M. Gell, The Solution Precursor Plasma Spray (SPPS) Process: A Review with Energy Considerations, J. Therm. Spray Technol., 2015, 24(7), p 1153-1165. https://doi.org/10.1007/s11666-015-0272-910.1007/s11666-015-0272-9 ↗
12. W.H. Gitzen, Ed., Alumina as a Ceramic Material, American Ceramic Society, Columbus, 1970
13. P. Chraska, J. Dubsky, K. Neufuss, and J. Pisacka, Alumina-Base Plasma-Sprayed Materials Part I: Phase Stability of Alumina and Alumina-Chromia, J. Therm. Spray Technol., 1997, 6, p 320-32610.1007/s11666-997-0066-9 ↗
14. J. Dubsky, P. Chraska, B. Kolman, C.C. Stahr, and L.-M. Berger, Phase Formation Control in Plasma Sprayed Alumina-Chromia Coatings, Ceram. Silikáty, 2011, 55(3), p 294-300
15. C.C. Stahr, S. Saaro, L.M. Berger, J. Dubský, K. Neufuss, and M. Herrmann, Dependence of the Stabilization of α-Alumina on the Spray Process, J. Therm. Spray Technol., 2007, 16, p 822-83010.1007/s11666-007-9107-7 ↗
16. K. Yang, X. Zhou, H. Zhao, and S. Tao, Microstructure and Mechanical Properties of Al2O3–Cr2O3 Composite Coatings Produced by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2011, 206(6), p 1362-1371. https://doi.org/10.1016/j.surfcoat.2011.08.06110.1016/j.surfcoat.2011.08.061 ↗
17. J.R. Davis, Ed., Handbook of Thermal Spray Technology, ASM International, Materials Park, 2004
18. T. Tesar, R. Musalek, F. Lukac, J. Medricky, J. Cizek, V. Rimal, S. Joshi, and T. Chraska, Increasing α-Phase Content of Alumina-Chromia Coatings Deposited by Suspension Plasma Spraying Using Hybrid and Intermixed Concepts, Surf. Coat. Technol., 2019, 2018, p 1-14. https://doi.org/10.1016/j.surfcoat.2019.04.09110.1016/j.surfcoat.2019.04.091 ↗
19. S. Björklund, S. Goel, and S. Joshi, Function-Dependent Coating Architectures by Hybrid Powder-Suspension Plasma Spraying: Injector Design, Processing and Concept Validation, Mater. Des., 2018, 142(1), p 56-65. https://doi.org/10.1016/j.matdes.2018.01.00210.1016/j.matdes.2018.01.002 ↗
20. S.V. Joshi, G. Sivakumar, T. Raghuveer, and R.O. Dusane, Hybrid Plasma-Sprayed Thermal Barrier Coatings Using Powder and Solution Precursor Feedstock, J. Therm. Spray Technol., 2014, 23(4), p 616-62410.1007/s11666-014-0075-4 ↗
21. A. Potthoff, R. Kratzsch, M. Barbosa, and N. Kulissa, Development and Application of Binary Suspensions in the Ternary System Cr2O3-TiO2-Al2O3 for S-HVOF Spraying, J. Therm. Spray Technol., 2018, 27(4), p 710-717. https://doi.org/10.1007/s11666-018-0709-z10.1007/s11666-018-0709-z ↗
22. G. Sivakumar, R.O. Dusane, and S.V. Joshi, A Novel Approach to Process Phase Pure α-Al2O3 Coatings by Solution Precursor Plasma Spraying, J. Eur. Ceram. Soc., 2013, 33(13-14), p 2823-2829. https://doi.org/10.1016/j.jeurceramsoc.2013.05.00510.1016/j.jeurceramsoc.2013.05.005 ↗
23. G. Sivakumar, M. Ramakrishna, R.O. Dusane, and S.V. Joshi, Effect of SPPS Process Parameters on In-Flight Particle Generation and Splat Formation to Achieve Pure α-Al2O3 Coatings, J. Therm. Spray Technol., 2015, 24(7), p 1221-1234. https://doi.org/10.1007/s11666-015-0284-510.1007/s11666-015-0284-5 ↗
24. T. Tesar, R. Musalek, J. Medricky, J. Kotlan, F. Lukac, Z. Pala, P. Ctibor, T. Chraska, S. Houdkova, V. Rimal, and N. Curry, Development of Suspension Plasma Sprayed Alumina Coatings with High Enthalpy Plasma Torch, Surf. Coat. Technol., 2017, 325(25), p 277-288. https://doi.org/10.1016/j.surfcoat.2017.06.03910.1016/j.surfcoat.2017.06.039 ↗
25. M.I.B. Bernardi, S.C.L. Crispim, A.P. Maciel, A.G. Souza, M.M. Conceição, E.R. Leite, and E. Longo, Synthesis and Characterization of Al2O3/Cr2O3-Based Ceramic Pigments, J. Therm. Anal. Calorim., 2004, 75(2), p 475-48010.1023/B:JTAN.0000027135.04033.e8 ↗
26. H.-J. Lunk, Discovery, Properties and Applications of Chromium and Its Compounds, ChemTexts, 2015, 1(1), p 6. https://doi.org/10.1007/s40828-015-0007-z10.1007/s40828-015-0007-z ↗
27. B.D. Fahlman and A.R. Barron, CVD of Chromium-Doped Alumina “Ruby” Thin Films, Chem. Vap. Depos., 2001, 7(2), p 62-6610.1002/1521-3862(200103)7:2<62::AID-CVDE62>3.0.CO;2-V ↗
28. G. Salek, A. Devoti, E. Lataste, A. Demourgues, A. Garcia, V. Jubera, and M. Gaudon, Optical Properties versus Temperature of Cr-Doped γ-and α-Al2O3: Irreversible Thermal Sensors Application, J. Lumin., 2016, 179(3), p 189-196. https://doi.org/10.1016/j.jlumin.2016.07.00410.1016/j.jlumin.2016.07.004 ↗
29. D.K. Nguyen, H. Lee, and I.T. Kim, Synthesis and Thermochromic Properties of Cr-Doped Al2O3 for a Reversible Thermochromic Sensor, Materials (Basel), 2017, 10(5), p 476-48910.3390/ma10050476 ↗
30. K. Nassau, The Physics and Chemistry of Color: The 15 Mechanisms, The Science of Color, 2nd ed., S.K. Shevell, Ed., Elsevier, Amsterdam, 2003, p 247-28010.1016/B978-044451251-2/50008-8 ↗
31. S.W.S. McKeever, Thermoluminescence of Solids, Cambridge University Press, Cambridge, 1988
32. D. Liu, Effects of Cr Content and Morphology on the Luminescence Properties of the Cr-Doped Alpha-Al2O3 Powders, Ceram. Int., 2013, 39(5), p 4765-4769. https://doi.org/10.1016/j.ceramint.2012.11.06310.1016/j.ceramint.2012.11.063 ↗
33. M. Hrabovsky, V. Kopecky, V. Sember, T. Kavka, O. Chumak, and M. Konrad, Properties of Hybrid Water/Gas DC Arc Plasma Torch, IEEE Trans. Plasma Sci., 2006, 34(4), p 1566-1575. https://doi.org/10.1109/TPS.2006.87836510.1109/TPS.2006.878365 ↗
34. R. Musalek, J. Medricky, T. Tesar, J. Kotlan, Z. Pala, F. Lukac, K. Illkova, M. Hlina, T. Chraska, P. Sokolowski, and N. Curry, Controlling Microstructure of Yttria-Stabilized Zirconia Prepared from Suspensions and Solutions by Plasma Spraying with High Feed Rates, J. Therm. Spray Technol., 2017, 26(8), p 1787-180310.1007/s11666-017-0622-x ↗
35. O. Panák, M. Držková, N. Kailová, and T. Syrový, Colorimetric Analysis of Thermochromic Samples in Different Forms Employing a Digital Camera, Meas. J. Int. Meas. Confed., 2018, 127, p 554-56410.1016/j.measurement.2018.06.025 ↗
36. O. Panák, M. Držková, and M. Kaplanová, Insight into the Evaluation of Colour Changes of Leuco Dye Based Thermochromic Systems as a Function of Temperature, Dye. Pigment., 2015, 120, p 279-28710.1016/j.dyepig.2015.04.022 ↗
37. A.V. Belykh, A.M. Efremov, and M.D. Mikhailov, Thermochromic Material, European Patent Office, 2012, p 13.
38. D. Chen, E.H. Jordan, and M. Gell, The Solution Precursor Plasma Spray Coatings: Influence of Solvent Type, Plasma Chem. Plasma Process., 2010, 30(1), p 111-11910.1007/s11090-009-9200-4 ↗
39. A. Joulia, G. Bolelli, E. Gualtieri, L. Lusvarghi, S. Valeri, M. Vardelle, S. Rossignol, and A. Vardelle, Comparing the Deposition Mechanisms in Suspension Plasma Spray (SPS) and Solution Precursor Plasma Spray (SPPS) Deposition of Yttria-Stabilised Zirconia (YSZ), J. Eur. Ceram. Soc., 2014, 34(15), p 3925-3940. https://doi.org/10.1016/j.jeurceramsoc.2014.05.02410.1016/j.jeurceramsoc.2014.05.024 ↗
40. D. Triantafyllidis, L. Li, and F.H. Stott, Crack-Free Densification of Ceramics by Laser Surface Treatment, Surf. Coat. Technol., 2006, 201(6), p 3163-317310.1016/j.surfcoat.2006.06.032 ↗
41. P. Ballirano and R. Caminiti, Rietveld Refinements on Laboratory Energy Dispersive X-Ray Diffraction (EDXD) Data, J. Appl. Crystallogr., 2001, 34(6), p 757-762. https://doi.org/10.1107/S002188980101472810.1107/S0021889801014728 ↗
42. I.F. Myronyuk, V.I. Mandzyuk, V.M. Sachko, and V.M. Gunko, Structural and Morphological Features of Disperse Alumina Synthesized Using Aluminum Nitrate Nonahydrate, Nanoscale Res. Lett., 2016, 11(1), p 153. https://doi.org/10.1186/s11671-016-1366-010.1186/s11671-016-1366-0 ↗
43. H. Sawada, Residual Electron Density Study of Chromium Sesquioxide by Crystal Structure and Scattering Factor Refinement, Mater. Res. Bull., 1994, 29(3), p 239-24510.1016/0025-5408(94)90019-1 ↗
44. E. Turunen, T. Varis, T.E. Gustafsson, J. Keskinen, T. Fält, and S.P. Hannula, Parameter Optimization of HVOF Sprayed Nanostructured Alumina and Alumina-Nickel Composite Coatings, Surf. Coat. Technol., 2006, 200(16-17), p 4987-499410.1016/j.surfcoat.2005.05.018 ↗
45. P.P. Psyllaki, M. Jeandin, and D.I. Pantelis, Microstructure and Wear Mechanisms of Thermal-Sprayed Alumina Coatings, Mater. Lett., 2001, 47(1-2), p 77-8210.1016/S0167-577X(00)00215-9 ↗
46. Y. Gao, X. Xu, Z. Yan, and G. Xin, High Hardness Alumina Coatings Prepared by Low Power Plasma Spraying, Surf. Coat. Technol., 2002, 154(2-3), p 189-19310.1016/S0257-8972(01)01711-X ↗
47. R.G. Burns, Mineralogical Applications of Crystal Field Theory, 2nd ed., Cambridge University Press, Cambridge, 199310.1017/CBO9780511524899 ↗
48. J. Medricky, R. Musalek, M. Janata, T. Chraska, and F. Lukac, Cost-Effective Plasma Spraying for Large-Scale Applications, ITSC 2018—Proceedings of the International Thermal Spray Conference, F. Azarmi, K. Balani, T. Eden, T. Hussain, Y.-C. Lau, H. Li, K. Shinoda, F.-L. Toma, and J. Veilleux, Ed., Orlando, ASM International, 2018, p 683-689
49. C. Lempereur, R. Andral, and J.Y. Prudhomme, Surface Temperature Measurement on Engine Components by Means of Irreversible Thermal Coatings, Meas. Sci. Technol., 2008, 19(10), p 10550110.1088/0957-0233/19/10/105501 ↗