Effect of Thermally Softened Bronze Matrix on the Fracturing Behavior of Diamond Particles in Hybrid Sprayed Bronze/Diamond Composite
Source abstract
Abstract
In our previous study (Na et al., Compos Sci Technol 69:463-468, 2009), optimized thickness of protective nickel film was proposed for smaller diamond feedstock to obtain reduced impact stress and uniform flight behavior of particles during kinetic (or cold) spraying. However, in this study, nickel-coated diamond particles were severely fractured with increasing particle size due to high kinetic energy. Hence, an innovative hybrid spraying technique (a combination of kinetic and thermal spraying) was introduced to embed relatively large diamond particles into the bronze matrix. Size distributions of the diamond particles in the composite coatings were analyzed by scanning electron microscopy, an electron probe micro analyzer, and image analysis methods. In addition, impact behaviors of diamond particles in kinetic and hybrid gas flows were simulated through finite element analysis (ABAQUS/Explicit 6.7-2). Diamond fracturing was significantly minimized by the reduced impact energy afforded by the thermally softened bronze matrix through hybrid spraying.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. W. Li, Y. Wang, S. Fan, and J. Xu, Wear of Diamond Grinding Wheels and Material Removal Rate of Silicon Nitrides under Different Machining Conditions, Mater. Lett., 2007, 61, p 54-5810.1016/j.matlet.2006.04.004 ↗
2. Q.S. Chang, H. Xie, W. Zhang, H. Ye, and P. Hing, Preferential Oxidation of Diamond{111}, J. Phys. D Appl. Phys., 2000, 33, p 2196-219910.1088/0022-3727/33/17/316 ↗
3. S. Shin, Y. Xiong, Y. Ji, H.J. Kim, and C. Lee, The Influence of Process Parameters on Deposition Characteristics of a Soft/Hard Composite Coating in Kinetic Spray Process, Appl. Surf. Sci., 2008, 254, p 2269-227510.1016/j.apsusc.2007.09.017 ↗
4. T.H. VanSteenkiste, A. Elmoursi, D. Gorkiewicz, and B. Gillispie, Fracture Study of Aluminum Composite Coatings Produced by the Kinetic Spray Method, Surf. Coat. Technol., 2005, 194, p 103-11010.1016/j.surfcoat.2004.05.005 ↗
5. H. Na, G. Bae, S. Shin, S. Kumar, H.J. Kim, and C. Lee, Advanced Deposition Characteristics of Kinetic Sprayed Bronze/Diamond Composite by Tailoring Feedstock Properties, Compos. Sci. Technol., 2009, 69, p 463-46810.1016/j.compscitech.2008.11.015 ↗
6. E. Irissou, J.G. Legoux, C. Moreau, and A.N. Ryabinin, How Cold is Cold Spray? An Experimental Study of the Heat Transfer to the Substrate in Cold Gas Dynamic Spraying, Thermal Spray 2008: Crossing Borders, E. Lugscheider, Ed., ASM International, Materials Park, OH, 200810.31399/asm.cp.itsc2008p0613 ↗
7. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p 4379-439410.1016/S1359-6454(03)00274-X ↗
8. J. Pattison, S. Celotto, A. Khan, and W. O’Neill, Standoff Distance and Bow Shock Phenomena in the Cold Spray Process, Surf. Coat. Technol., 2008, 202, p 1443-145410.1016/j.surfcoat.2007.06.065 ↗
9. Hibbitt, Karlsson, and Soerensen, ABAQUS™ 6.7-2 User Manual, Pawtucket, RI, USA, 2007
10. B. Liu, T. Zhang, and D.T. Gawne, Computational Analysis of the Influence of Process Parameters on the Flow Field of a Plasma Jet, Surf. Coat. Technol., 2000, 132, p 202-21610.1016/S0257-8972(00)00733-7 ↗
11. S. Sampath and H. Herman, Rapid Solidification and Microstructure Development During Plasma Spray Deposition, J. Therm. Spray Techol., 1996, 5(4), p 445-45610.1007/BF02645275 ↗
12. W.Y. Li, H. Liao, C.J. Li, G. Li, C. Coddet, and X. Wang, On High Velocity Impact of Micro-Sized Metallic Particles in Cold Spraying, Appl. Surf. Sci., 2006, 253, p 2852-286210.1016/j.apsusc.2006.05.126 ↗
13. K. Sakaki and Y. Shimizu, Effect of the Increase in the Entrance Convergent Section Length of the Gun Nozzle on the High-Velocity Oxygen Fuel and Cold Spray Process, J. Therm. Spray Technol., 2001, 10, p 487-49610.1361/105996301770349268 ↗
14. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, and N.F. Smith, Particle Velocity and Deposition Efficiency in the Cold Spray Process, J. Therm. Sci. Technol., 1999, 8, p 576-582
15. G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. Lee, General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56, p 4858-486810.1016/j.actamat.2008.06.003 ↗
16. J. Wu, H. Fang, S.H. Yoon, H.J. Kim, and C. Lee, Measurement of Particle Velocity and Characterization of Deposition in Aluminum Alloy Kinetic Spraying Process, Appl. Surf. Sci., 2005, 252, p 1368-137710.1016/j.apsusc.2005.02.108 ↗