Effect of Thermal Aging on Microstructure and Mechanical Properties of Plasma-Sprayed Samarium Zirconate Coatings
Source abstract
Abstract
The rare-earth zirconates with the general formula of Ln2Zr2O7 (Ln = rare-earth elements) having considerable low thermal conductivity and exhibiting good phase stability at high temperature have attracted particular interest in thermal barrier coating (TBC) applications. The Sm2Zr2O7 coatings were deposited by plasma spraying, and the effect of thermal aging on their microstructure and mechanical properties was examined. The lamellar structure gradually disappeared with the temperature increasing for thermal aging. The evaluation by image analysis revealed that the amount of microcrack in coatings decreased with increasing aging temperature because of the increase in aspect ratio caused by microcrack healing, while no obvious change was observed in the spherical porosity. The as-sprayed Sm2Zr2O7 coating exhibited low microhardness and elastic modulus, which increased with rise in aging temperature because of the microstructure reconfiguration; in addition, the ratio of microhardness to elastic modulus decreased with aging temperature increase, indicating a promotion in plastic property.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. N.P. Padture, M. Gell, and E.H. Jordan, Materials Science—Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296(5566), p 280-28410.1126/science.1068609 ↗
2. R.A. Miller, Current Status of Thermal Barrier Coatings—An Overview, Surf. Coat. Technol., 1987, 30(1), p 1-1110.1016/0257-8972(87)90003-X ↗
3. D.M. Zhu and R.A. Miller, Sintering and Creep Behavior of Plasma-Sprayed Zirconia- and Hafnia-Based Thermal Barrier Coatings, Surf. Coat. Technol., 1998, 109(1-3), p 114-12010.1016/S0257-8972(98)00669-0 ↗
4. D.R. Clarke and C.G. Levi, Materials Design for the Next Generation Thermal Barrier Coatings, Annu. Rev. Mater. Res., 2003, 33, p 383-41710.1146/annurev.matsci.33.011403.113718 ↗
5. K. An, K.S. Ravichandran, R.E. Dutton, and S.L. Semiatin, Microstructure, Texture, and Thermal Conductivity of Single-Layer and Multilayer Thermal Barrier Coatings of Y2O3-Stabilized ZrO2 and Al2O3 Made by Physical Vapor Deposition, J. Am. Ceram. Soc., 1999, 82(2), p 399-40610.1111/j.1551-2916.1999.tb20076.x ↗
6. H.F. Chen, Y.F. Gao, S.Y. Tao, Y. Liu, and H.J. Luo, Thermophysical Properties of Lanthanum Zirconate Coating Prepared by Plasma Spraying and the Influence of Post-Annealing, J. Alloy Compd., 2009, 486(1-2), p 391-39910.1016/j.jallcom.2009.06.162 ↗
7. X.Q. Cao, Application of Rare Earths in Thermal Barrier Coating Materials, J. Mater. Sci. Technol., 2007, 23(1), p 15-3710.1179/174328407X154392 ↗
8. J. Wu, X.Z. Wei, N.P. Padture, P.G. Klemens, M. Gell, E. Garcia, P. Miranzo, and M.I. Osendi, Low-Thermal-Conductivity Rare-Earth Zirconates for Potential Thermal-Barrier-Coating Applications, J. Am. Ceram. Soc., 2002, 85(12), p 3031-303510.1111/j.1151-2916.2002.tb00574.x ↗
9. R. Vassen, X.Q. Cao, F. Tietz, D. Basu, and D. Stover, Zirconates as New Materials for Thermal Barrier Coatings, J. Am. Ceram. Soc., 2000, 83(8), p 2023-202810.1111/j.1151-2916.2000.tb01506.x ↗
10. X.Q. Cao, R. Vassen, W. Jungen, S. Schwartz, F. Tietz, and D. Stover, Thermal Stability of Lanthanum Zirconate Plasma-Sprayed Coating, J. Am. Ceram. Soc., 2001, 84(9), p 2086-209010.1111/j.1151-2916.2001.tb00962.x ↗
11. G. Suresh, G. Seenivasan, M.V. Krishnaiah, and P.S. Murti, Investigation of the Thermal Conductivity of Selected Compounds of Gadolinium and Lanthanum, J. Nucl. Mater., 1997, 249(2-3), p 259-26110.1016/S0022-3115(97)00235-3 ↗
12. G. Suresh, G. Seenivasan, M.V. Krishnaiah, and P.S. Murti, Investigation of the Thermal Conductivity of Selected Compounds of Lanthanum, Samarium and Europium, J. Alloy Compd., 1998, 269(1-2), p L9-L1210.1016/S0925-8388(97)00629-4 ↗
13. H.B. Zhao, C.G. Levi, and H.N.G. Wadley, Vapor Deposited Samarium Zirconate Thermal Barrier Coatings, Surf. Coat. Technol., 2009, 203(20-21), p 3157-316710.1016/j.surfcoat.2009.03.048 ↗
14. J.H. Yu, H.Y. Zhao, S.Y. Tao, X.M. Zhou, and C.X. Ding, Thermal Conductivity of Plasma Sprayed Sm2Zr2O7 Coatings, J. Eur. Ceram. Soc., 2010, 30(3), p 799-80410.1016/j.jeurceramsoc.2009.09.010 ↗
15. J.A. Thompson and T.W. Clyne, The Effect of Heat Treatment on the Stiffness of Zirconia Top Coats in Plasma-Sprayed TBCs, Acta Mater., 2001, 49(9), p 1565-157510.1016/S1359-6454(01)00065-9 ↗
16. F. Cernuschi, P.G. Bison, S. Marinetti, and P. Scardi, Thermophysical, Mechanical and Microstructural Characterization of Aged Free-Standing Plasma-Sprayed Zirconia Coatings, Acta Mater., 2008, 56(16), p 4477-448810.1016/j.actamat.2008.04.067 ↗
17. Y. Tan, J.P. Longtin, S. Sampath, and H. Wang, Effect of the Starting Microstructure on the Thermal Properties of As-Sprayed and Thermally Exposed Plasma-Sprayed YSZ Coatings, J. Am. Ceram. Soc., 2009, 92(3), p 710-71610.1111/j.1551-2916.2009.02953.x ↗
18. S.R. Choi, D.M. Zhu, and R.A. Miller, Effect of Sintering on Mechanical Properties of Plasma-Sprayed Zirconia-Based Thermal Barrier Coatings, J. Am. Ceram. Soc., 2005, 88(10), p 2859-286710.1111/j.1551-2916.2005.00504.x ↗
19. J.F. Li and C.X. Ding, Determining Microhardness and Elastic Modulus of Plasma-Sprayed Cr3C2-NiCr Coatings Using Knoop Indentation Testing, Surf. Coat. Technol., 2001, 135(2-3), p 229-23710.1016/S0257-8972(00)01066-5 ↗
20. R. Mcpherson, A Review of Microstructure and Properties of Plasma Sprayed Ceramic Coatings, Surf. Coat. Technol., 1989, 39(1-3), p 173-18110.1016/0257-8972(89)90052-2 ↗
21. B.P. Mandal and A.K. Tyagi, Preparation and High Temperature ARD Studies on a Pyrochlore Series with the General Composition Gd2-xNdxZr2O7, J. Alloy Compd., 2007, 437(1-2), p 260-26310.1016/j.jallcom.2006.07.093 ↗
22. M.J.D. Rushton, C.R. Stanek, A.R. Cleave, B.P. Uberuaga, K.E. Sickafus, and R.W. Grimes, Simulation of Defects and Defect Processes in Fluorite and Fluorite Related Oxides: Implications for Radiation Tolerance, Nucl. Instrum. Meth. B, 2007, 255(1), p 151-15710.1016/j.nimb.2006.11.018 ↗
23. S. Sampath and H. Herman, Rapid Solidification and Microstructure Development During Plasma Spray Deposition, J. Therm. Spray Technol., 1996, 5(4), p 445-45610.1007/BF02645275 ↗
24. M.P. Vandijk, K.J. Devries, and A.J. Burggraaf, Oxygen Ion and Mixed Conductivity in Compounds with the Fluorite and Pyrochlore Structure, Solid State Ionics, 1983, 9-10(Dec), p 913-91910.1016/0167-2738(83)90110-8 ↗
25. R.C. Rossi, Prediction of Elastic Moduli of Composites, J. Am. Ceram. Soc., 1968, 51(8), p 43310.1111/j.1151-2916.1968.tb11914.x ↗
26. K.F. Wesling, D.F. Socie, and B. Beardsley, Fatigue of Thick Thermal Barrier Coatings, J. Am. Ceram. Soc., 1994, 77(7), p 1863-186810.1111/j.1151-2916.1994.tb07063.x ↗
27. J. Musil, F. Kunc, H. Zeman, and H. Polakova, Relationships Between Hardness, Young’s Modulus and Elastic Recovery in Hard Nanocomposite Coatings, Surf. Coat. Technol., 2002, 154(2-3), p 304-31310.1016/S0257-8972(01)01714-5 ↗
28. S.H. Leigh, C.K. Lin, and C.C. Berndt, Elastic Response of Thermal Spray Deposits Under Indentation Tests, J. Am. Ceram. Soc., 1997, 80(8), p 2093-209910.1111/j.1151-2916.1997.tb03093.x ↗