An Integrated Investigation Approach for Coating Temperature Measurement and Control During Plasma Spraying
Source abstract
Abstract
An integrated investigation approach for temperature measurement and control of plasma sprayed coating is presented in this paper. It is based on infrared (IR) pyrometry combined with specific robot scanning trajectories. The temperature evolution was continuously detected and recorded during preheating, spraying, and cooling stages. Then the two specific factors, periodic average temperature and periodic standard deviation, were adopted to evaluate the temperature variation and the fluctuation of the thermal cycle relevant to one spraying period. These two factors were successful in describing the temperature variation during experimental processing sets. Moreover, the influence of processing parameters of Z-type robot spray trajectory, including spray distance, scanning velocity, and scanning step on coating temperature is experimentally researched and explained reasonably by comparing the two factors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer · Combustion and flame dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. P. Fauchais, Understanding Plasma Spraying, J. Phys. D: Appl. Phys., 2004, 37(9), p R86-R10810.1088/0022-3727/37/9/R02 ↗
2. P. Fauchais, A. Vardelle, B. Dussoubs, Quo Vadis Thermal Spraying?, J. Therm. Spray Technol., 2001, 10(1), p 44-6610.1361/105996301770349510 ↗
3. C. Moreau, Towards a Better Control of Thermal Spray Process, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., May 25-29, 1998 (Nice, France), ASM International, 1998, p 1681-169310.31399/asm.cp.itsc1998p1681 ↗
4. T. Renault, C. Bossoutrot, F. Braillard, S. Bansard, M. Vardelle, and P. Fauchais, A Reliable and Reproducible Plasma Spray Process using On-line Control, Proceedings of Matériaux 2002, 21-25 October, 2002 (Tours, France)
5. P. Fauchais and M. Vardelle, How to Improve the Reliability and Reproducibility of Plasma Sprayed Coatings, Thermal Spray 2003: Advancing the Science and Applying the Technology, B.R. Marple and C. Moreau, Eds., May 5-8, 2003 (Orlando, FL), ASM International, 2003, Vol. 2, p 1165-117310.31399/asm.cp.itsc2003p1165 ↗
6. T. Renault, M. Vardelle, P. Fauchais, H. Hoffmann, and F. Braillard, On-line Monitoring (SDC) through Coating Surface Temperature of Residual Stresses in APS WC-Co 17 wt% Coatings on Hastelloy X, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Eds., May 28-30, 2001 (Singapore), ASM International, 2001, p 743-75010.31399/asm.cp.itsc2001p0743 ↗
7. C. Verdy, B. Serio, and C. Coddet, In-situ Temperature Measurement using Embedded Micro-Thermocouples in Vacuum Plasma Sprayed Multi-Layered Structures, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., May 25-29, 1998 (Nice, France), ASM International, 1998, p 821-82410.31399/asm.cp.itsc1998p0821 ↗
8. T. Grinys, S. Tamulevičius, M. Žadvydas, Control of the Substrate Temperature during Plasma Spray Deposition, Mater. Sci. (Medžiagotyra), 2004, 10(3), p 221-224
9. H.W. Ng, Z. Gan, A Finite Element Analysis Technique for Predicting As-Sprayed Residual Stresses Generated by the Plasma Spray Coating Process, Finite Elem. Anal. Des., 2005, 41(13), p 1235-125410.1016/j.finel.2005.02.002 ↗
10. P.H. Bertrand, M. Ignatiev, G. Flamant, I. Smurov, Pyrometry Applications in Thermal Plasma Processing, Vacuum, 2000, 56(1), p 71-7610.1016/S0042-207X(99)00168-2 ↗
11. P. Jokinen, T. Varis, A. Korpiola, and T. Kauppinen, In-situ Temperature Control of Coating and Workpiece in Thermal Spraying, Tagungsband Conference Proceedings, E. Lugscheider, and R.A. Kammer, Eds., March 17-19, 1999 (Düsseldorf, Germany), DVS Deutscher Verband für Schweißen, 1999, p 318-32010.31399/asm.cp.itsc1999p0318 ↗
12. E. Lugscheider, F. Ladru, V. Gourlaouen, and C. Gualco, Enhanced Atmospheric Plasma Spraying of Thick TBCs by Improved Process Control and Deposition Efficiency, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., May 25-29, 1998 (Nice, France), ASM International, 1998, p 1583-158810.31399/asm.cp.itsc1998p1583 ↗
13. O. Brandt and M. Wandelt, Thermal Measurements of Substrate During Spray Processes, Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, Ed., Oct. 7-11, 1996 (Cincinnati, OH), ASM International, 1996, p 799-80210.31399/asm.cp.itsc1996p0799 ↗
14. L. Moulla, Z. Salhi, M. P. Planche, M. Cherigui, C. Coddet, and F. Belfort, On the Measurement of Substrate Temperature during Thermal Spraying, Thermal Spray Connects: Explore its Surfacing Potential!, E. Lugscheider, Ed., May 2-4, 2005 (Basel, Switzerland), DVS-Verlag, Düsseldorf, Germany, 2005, p 679-68310.31399/asm.cp.itsc2005p0679 ↗
15. J. P. Sauer and P. Sahoo, HVOF Process Control Using Almen and Temperature Measurement, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Eds., May 28-30, 2001 (Singapore), ASM International, 2001, p 791-79610.31399/asm.cp.itsc2001p0791 ↗
16. M. Dvorak, C. Florin, and E. Amrhein, On-line Quality Control of Thermally Sprayed Coatings, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Eds., May 28-30, 2001 (Singapore), ASM International, 2001, p 1255-125910.31399/asm.cp.itsc2001p1255 ↗
17. P. Litoš, M. Honner, and J. Kuneš, Thermography Applications in Technology Research, Proc. Infrared Camera Applications International Conference, M.N. Billerica, Ed., Oct 4-8, 2004 (Las Vegas, NV), Infrared Training Center, 2004, p 321-330
18. D.R. Green, M.D. Schmeller, R.A. Sulit, Thermal Nondestructive Examination Method for Thermal Sprayed Coatings, Oceans, 1982, 14, p 532-536
19. P. Jokinen, T. Kauppinen, T. Varis, and K. Korpiola, Using IR-Thermography as a Quality-Control Tool for Thermal Spraying in the Aircraft Industry, Proc. SPIE— The International Society for Optical Engineering, R.B. Dinwiddie and D.H. Lemieux, Eds., April 24-27, 2000 (Orlando, FL), Society of Photo-Optical Instrumentation Engineers, 2000, p 232-23710.1117/12.381565 ↗
20. P.D.A. Jones, S.R. Duncan, T. Rayment, P.S. Grant, Control of Temperature Profile for a Spray Deposition Process, IEEE Transactions on Control Systems Technology, 2003, 11(5), p 656-66710.1109/TCST.2003.816412 ↗
21. E. Lugscheider, F. Ladru, A. Fischer, and C. Herbst, Plasma Sprayed Ceramic Coatings for Electrical Purposes - Necessity of Process Control, Proc. 24th Annual Conference of the IEEE Industrial Electronics Society, Aug 31-Sept 4, 1998 (Aachen, Germany), Institute of Electrical & Electronics Enginee 1998, p 2284-228910.1109/IECON.1998.724077 ↗
22. Y. Cheng, In situ Practicality Technology of Infrared Diagnosis, Mechanical Industry Publish House, Beijing, China, 2002, p 3-4 (in Chinese)
23. C.J. Friedrich, R. Gadow, A. Killinger, and C. Li, IR Thermographic Imaging—A Powerful Tool for On-line Process Control of Thermal Spraying, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Eds., May 28-30, 2001 (Singapore), ASM International, 2001, p 779-78610.31399/asm.cp.itsc2001p0779 ↗
24. H. Zhang, H. Liu, G. Wang, M. Guo, Experimental Research on Temperature Field of Plasma Spray Coating, China Mechanical Engineering, 2004, 15(21), p 1958-1961 (in Chinese)
25. K. Richter, K. Drescher, Pyrometric Substrate Temperature Measurement during Plasma Etching, Surf. Coat. Technol., 1995, 74-75(1-3), p 546-55110.1016/0257-8972(95)08306-5 ↗
26. T. Renault, M. Vardelle, A. Grimaud, P. Fauchais, and H. Hoffman, On-line Control of Particle Spray Jet and Residual Stresses in Plasma Sprays, Thermal Spray: Surface Engineering via Applied Research, C.C. Berndt, Ed., May 8-11, 2000 (Montréal, Québec, Canada), ASM International, 2000, p 1383-139110.31399/asm.cp.itsc2000p1383 ↗
27. C. Bossoutrot, F. Braillard, S. Bansard, M. Vardelle, and P. Fauchais, Industrial On-line Control of HVOF Spray Process using SDC System, Thermal Spray 2003: Advancing the Science and Applying the Technology, B.R. Marple, and C. Moreau, Eds., May 5-8, 2003 (Orlando, FL), ASM International, 2003, Vol. 2, p 1165-117310.31399/asm.cp.itsc2003p1243 ↗
28. E. Meillot, E.M. Fromentin, Measurements of Heat Flux in an Atmosphere- and Temperature-Controlled Plasma Spray Process, Ann. N.Y. Acad. Sci., 1999, 891(1), p 90-9710.1111/j.1749-6632.1999.tb08756.x ↗
29. E. Meillot, L. Bianchi, E. Roussel, A. Freslon, Industrial Applications with the Atmosphere and Temperature Controlled Plasma Spraying Process, High Temp. Mater. Proc., 2001, 5(1), p 51-59
30. Y. Bao, T. Zhang, D.T. Gawne, Non-Steady State Heating of Substrate and Coating During Thermal Spray Deposition, Surf. Coat. Technol., 2005, 194(1), p 82-9010.1016/j.surfcoat.2004.05.017 ↗
31. M. Vardelle, T. Renault, P. Fauchais, Choice of an IR Pyrometer to Measure the Surface Temperature of a Coating during its Formation in Air Plasma Spraying, High Temp. Mater. Proc., 2002, 6(4), p 469-489
32. “Raytek Automation Products: Noncontact Temperature Measurement for Industrial Applications,” 2-2102 Rev. D, Raytek Corporation, March 2006
33. H. Madura, T. Piatkowski, Emissivity Compensation Algorithms in Double-Band Pyrometry, Infrared Phys. Technol., 2004, 46(1-2), p 185-18910.1016/j.infrared.2004.03.024 ↗
34. L. Moulla, P. Gougeon, C. Coddet, Influence of Reflected Atmospheric Plasma Spraying Torch Radiations on Long Wavelength Ir Radiometry Temperature Measurement, Infrared Phys. Technol., 2005, 46(5), p 364-36910.1016/j.infrared.2004.06.004 ↗
35. L. Chen, T. Bing, X. Hu, Design Principle for Simultaneous Emissivity and Temperature Measurements, Opt. Eng., 1990, 29(12), p 1445-144810.1117/12.55745 ↗
36. M. Schlessinger, Infrared Technology Fundamentals, Marcel Dekker, 1995, p 12
37. “Technical Parameters of HY-2188G IR Thermal Camera,” Infrared Department of Huazhong Numerical Control Co., Ltd., Wuhan, China, Undated
38. R. Bolot, L. Li, R. Bonnet, C. Mateus, and C. Coddet, Modeling of the Substrate Temperature Evolution during the APS Thermal Spray Process, Thermal Spray 2003: Advancing the Science and Applying the Technology, B.R. Marple, and C. Moreau, Eds., May 5-8, 2003 (Orlando, FL), ASM International 2003, Vol. 2, p 949-95410.31399/asm.cp.itsc2003p0949 ↗
39. L. Bianchi, N. Baradel, I.N. Liorca, and V.G. Bertran, Influence of Plasma Spraying Parameters on Coating Damage, Thermal Spray: Surface Engineering via Applied Research, C.C. Berndt, Ed., May 8-11, 2000 (Montréal, Québec, Canada), ASM International, 2000, p 29-3610.31399/asm.cp.itsc2000p0029 ↗
40. S.L. Chen, P. Sitonen, and P. Kettunen, Experimental Design and Parameter Optimization for Plasma Spraying of Alumina Coatings, Thermal Spray: International Advances in Coatings Technology, C.C. Berndt, Ed., 1992 (Orlando, FL), ASM International, 1992, p 51-56
41. B. Xu, S. Liu, X. Liu, Plasma Spray and Bead Weld, China Railway Press, Beijing, 1986, p 61-62 (in Chinese)
42. R. Bolot, M. Imbert, and C. Coddet, Three Dimensional Transient Modeling of the Substrate Temperature Evaluation during the Coating Elaboration, Tagungsband Conference Proc., E. Lugscheider, Ed., March 4-6, 2002 (Essen, Germany), DVS Deutscher Verband Fur SchweiBen, 2002, p 979-98410.31399/asm.cp.itsc2002p0979 ↗
43. S. Guessasma, G. Montavon, C. Coddet, Modeling of the APS Plasma Spray Process using Artificial Neural Networks: Basis, Requirements and an Example, Comput. Mater. Sci., 2004, 29(3), p 315-33310.1016/j.commatsci.2003.10.007 ↗