journal article·2007-12

Optimization of a Rotating Twin Wire-Arc Spray Gun

Rodolphe Bolot, Hanlin Liao, Crisalia Mateus, Christian Coddet, Jean-Michel Bordes

Journal of Thermal Spray Technology· Volume 16· Issue 5-6
Publisher page

Abstract

Abstract The replacement of cast iron sleeves through thermal spray coatings is an interesting alternative to improve the inter bore reliability, to reduce weight and to reduce the inter bore distance for automotive engines. Most of the actual production and pilot equipments use the ROTAPLASMA process to provide such functional coatings. However, the wire-arc spray process may often present different advantages like a higher deposition rate and a lower cost of the produced coatings. The LDS (Lichtbogendrahtspritzen) technology developed by DaimlerChrysler is a wire-arc process working with two wires whereas the PTWA (Plasma Transferred Wire Arc) process designed by Flame Spray Industries and the Ford Motor Company use a single wire. The present paper shows that the wire-arc technology may replace efficiently the APS (Atmospheric Plasma Spray) for the generation of thermally sprayed coatings applied on engine cylinder bores. A first rotating wire-arc spray system was previously designed and tested a few years ago. The present paper shows how computational fluid dynamic (CFD) may help in solving industrial problems: the FLUENT CFD code was used in order to perform improvements of the initial gun design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Aerosol Filtration and Electrostatic Precipitation · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. G. Barbezat The State of the Art of the Internal Plasma Spraying on Cylinder Bore in AlSi Cast Alloys. Int. J. Automot. Technol., 2001, 2(2), p 47-52
2. G. Barbezat Advanced Thermal Spray Technology and Coating for Lightweight Engine Blocks for the Automotive Industry. Surf. Coat. Technol., 2005, 200, p 1990-199310.1016/j.surfcoat.2005.08.017 ↗
3. G. Barbezat, High Performance Coatings Produced by Internal Plasma Spraying on Engine Blocks of New Generation, Thermal Spray Solutions: Advances in Technology and Application, DVS, Düsseldorf, Germany, 2004. ISBN: 3-87155-792-710.31399/asm.cp.itsc2004p0294 ↗
4. G. Barbezat, Coating Deposition of Bearing Materials on Connecting Rod by Thermal Spraying, Thermal Spray Connects: Explore its Surfacing Potential! E. Lugscheider, Ed., DVS, Düsseldorf, Germany, 2005, 1574+ pages. ISBN: 3-87155-793-510.31399/asm.cp.itsc2005p0642 ↗
5. G. Barbezat, Importance of Surface Preparation Technology Prior to Coating Deposition on Cylinder Bores for High Performance Engines, Thermal Spray 2007: Global Coating Solutions, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Eds., ASM International, Materials Park, OH, USA, 200710.31399/asm.cp.itsc2007p0276 ↗
6. D. Nowotni, C. Wanke, T. Haug, and P. Izquierdo, “Inner Torch,” US Patent 6,667,460 B2, 2003
7. K. Bobzin, E. Lugscheider, F. Ernst, J. Zwick, T. Schlaefer, C. Verpoort, A. Schwenk, F. Schreiber, T. Wenz, D. Cook, K. Kowalsky, and J. Conti, Coating Bores of Light Metal Crankcases, Building on 100 Years of Success, B.R. Marple, M.M. Hyland, Y.C. Lau, R.S. Lima, and J. Voyer, Eds., ASM International, Materials Park, OH, USA, 200610.31399/asm.cp.itsc2006p0439 ↗
8. E. Lugscheider, R. Dicks, K. Kowalsky, D. Cook, K. Nassenstein, and C. Verpoort, A Materials System and Method of its Application for the Wear Protection of Aluminium Engine Cylinder Bore Surfaces, Thermal Spray Solutions: Advances in Technology and Application, DVS, Düsseldorf, Germany, 2004. ISBN: 3-87155-792-710.31399/asm.cp.itsc2004p0304 ↗
9. J.P. Dunkerley, T.A. Friedrich, and G. Irons, “Apparatus for Rotary Spraying a Metallic Coating,” US Patent 5,908,670, 1999
10. R. Benary, Arc Thermal Spray Gun Extension and Gas Jet Member Therefor,” US Patent 6,091,042, 2000
11. M. Boulais Monin, Etude Paramétrique et Caractérisation de Matériaux Obtenus par Projection Thermique: Application à l’Evolution des Moteurs d’Automobiles, Thesis, University of Franche-Comté, 1998 (in French)
12. D.B. Marshall, T. Noma, A.G. Evans A Simple Method for Determining Elastic-Modulus-to-Hardness Ratio Using Knoop Indentation Measurements. J. Am. Ceram. Soc., 1982, 65(10), p C175-C17610.1111/j.1151-2916.1982.tb10357.x ↗
13. J. Stanisic, D. Kosikowski, P.S. Mohanty High-Speed Visualization and Plume Characterization of the Hybrid Spray Process. J. Therm. Spray Technol., 2006, 15(4), p 750-75810.1361/105996306X147036 ↗
14. K.M. Djamarani, I.M. Clark Characterization of Particle Size Based on Fine and Coarse Fractions. Powder Technol., 1997, 93, p 101-10810.1016/S0032-5910(97)03233-6 ↗
15. C. Coddet, R. Bolot, J.M. Bordes, and C. Meekel, Dispositif de Projection de Particules Métalliques par Arc Electrique Entre Deux Fils, FR Patent 2 866 901, French Registration Number 04 02049, 2005 (in French)