Flow Characterization of a Detonation Gun Facility and First Coating Experiments
Source abstract
Abstract
A computer-controlled detonation gun based spraying device has been designed and tested to obtain particle velocities over 1200 m/s. The device is able to be operated in two modes based on different flow-physical principles. In one mode, the device functions like a conventional detonation gun in which the powder is accelerated in a blast wave. In the other mode, an extension of the facility with a nozzle uses the detonated gas for an intermittently operated shock tunnel process in which the particles are injected into and accelerated by a quasi-steady high enthalpy nozzle flow with high reservoir conditions. Presented are experimental results of the operation without nozzle in which the device generates moderate to high particle velocities in an intermittent process with a frequency of 5 Hz. A hydrogen/oxygen mixture and Cu and WC-Co (88/12) powders are used in the experiments. Operation performance and tube outflow are characterized by time-resolved Schlieren images and pressure measurements. The particle velocities in the outflow are obtained by laser Doppler anemometry. Different substrate/powder combinations (Al/Cu, Steel/Cu, Al/WC-Co, and Steel/WC-Co) have been investigated by light microscopy and measurements of microhardness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Combustion and Detonation Processes · Laser-Plasma Interactions and Diagnostics · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. S.A. Sloan and M.A. Nettleton, A Model for the Axial Decay of a Shock Wave in a Large Abrupt Area Change, J. Fluid Mech., 1975, 71(4), p 769-78410.1017/S0022112075002844 ↗
2. A. Abe and K. Takayama, Numerical Simulation and Density Measurement of a Shock Wave Discharged from the Open End of a Shock Tube, Jpn. Soc. Mech. Eng. Int. J., 1990, 33, p 216-223
3. Q. Yu and H. Grönig, Shock Waves from an Open-Ended Shock Tube with Different Shapes, Shock Waves, 1996, 6, p 249-25810.1007/BF02535738 ↗
4. Al. Borisov, A. Borisov, V. Antipin, E. Vasilyev, O. Kovalev, M. Malanov, O. Shapeeva, and V. Zubkov, Shock Wave Cleaning of Heating Surfaces of Power Stations, Shock Waves. Proc. Sendai, Springer, Japan, 1991, Vol 2, p 1339.
5. K. Hanjalic and L. Smajevic, Detonation-Wave Technique for On-Load Deposit Removal from Surfaces Exposed to Fouling: Part I—Experimental Investigation and Development of the Method, J. Eng. Gas Turbines Power, 1994, 116, p 22310.1115/1.2906797 ↗
6. K. Hanjalic and L. Smajevic, Detonation-Wave Technique for On-Load Deposit Removal from Surfaces Exposed to Fouling: Part II—Full-Scale Application, J. Eng. Gas Turbines Power, 1994, 116, p 23110.1115/1.2906798 ↗
7. K. Ramadan and P. Butler, Analysis of Particles Dynamics and Heat Transfer in Detonation Thermal Spraying Systems, J. Therm. Spray Technol., 2004, 13(2), p 248-26410.1361/10599630419373 ↗
8. R. M. Poorman, H. B. Sargent, and H. Lamprey, Method and Apparatus Utilizing Detonation Waves for Spraying and Other Purposes, U.S. Patent No. 2,714,553, August 1955
9. Y. A. Kharlamov, Gaseous Pulse Detonation Spraying: Current Status, Challenges and Future Perspective, ITSC 2008, Juni 2-4, 2008 (Maastricht, Netherlands), ASM International, p 147-15410.31399/asm.cp.itsc2008p0147 ↗
10. Y.A. Nikolaev, A.A. Vasil’ev, and B.Y. Ul’yanitskii, Gas Detonation and Its Application in Engineering and Technologies (Review), Combust. Explos. Shock Waves, 2003, 39(4), p 382-41010.1023/A:1024726619703 ↗
11. P. Saravanan et al., Influence of Process Variables on the Quality of Detonation Gun Sprayed Alumina Coatings, Surf. Coat. Technol., 2000, 123, p 44-5410.1016/S0257-8972(99)00252-2 ↗
12. E. Doebelin, Measurement Systems—Application and Design, McGraw-Hill, Inc., New York, 1990
13. J.D. Anderson, Fundamentals of Aerodynamics, McGraw-Hill International Edition, New York, 2007
14. B. Esser, Die Zustandsgrößen im Stoßwellenkanal als Ergebnisse eines exakten Riemannlösers, PhD thesis, RWTH Aachen, 1991
15. M.A. Nettleton, Gaseous Detonations—Their Nature, Effects and Control, Chapman and Hall Ltd., London, 198710.1007/978-94-009-3149-7 ↗
16. W. Fickett and W. C. Davis, Detonation, University of California Press, 1974
17. E. Schultz and J. Shepherd, Validation of Detailed Reaction Mechanisms for Detonation Simulation, Explosion Dynamics Laboratory Report FM99-5 (2000), California Institute of Technology, Pasadena (Unpublished)
18. J.D. Anderson, Modern Compressible Flow with Historical Perspective, McGraw-Hill International Edition, New York, 2004
19. J.C.T. Wang and G.F. Widhopf, Numerical Simulation of Blast Flowfields Using a High Resolution TVD Finite Volume Scheme, Comput. Fluids, 1990, 18, p 10310.1016/0045-7930(90)90005-I ↗
20. K.S. Chang and J.K. Kim, Blast Dynamics Generated Behind a Strong Shock Wave Discharged from an Open-Ended Shock Tube, Comput. Fluid Dyn. J., 1993, 2, p 291
21. H. Du, W. Hua, J. Liu, J. Gong, C. Sun, and L. Wen, Influence of Process Variables on the Qualities of Detonation Gun Sprayed WC-Co coatings, Mater. Sci. Eng. A, 2005, 408, p 202-21010.1016/j.msea.2005.08.008 ↗
22. L. Venkatesh, N. Chavan, and G. Sundararajan, The Influence of Powder Particle Velocity and Microstructure on the Properties of Cold Sprayed Copper Coatings, J. Therm. Spray Technol., 2011, 20(5), p 1009-102110.1007/s11666-011-9614-4 ↗
23. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkimov, and V. Fomin, Cold Spray Technology, Elsevier Ltd., Amsterdam, 2007