journal article·2014-01

Effect of Dry-Ice Blasting on Structure and Magnetic Properties of Plasma-Sprayed Fe-40Al Coating from Nanostructured Powders

Bo Song, Shujuan Dong, Bernard Hansz, Hanlin Liao, Christian Coddet

Journal of Thermal Spray Technology· Volume 23· Issue 1-2
Publisher page

Abstract

Amorphous and nanocrystalline materials have attracted much interest in the field of new materials design because of their excellent mechanical and physical properties as well as their magnetic properties. In this work, Fe-40Al coatings were prepared from a nanostructured feedstock by atmospheric plasma spray combined with dry-ice blasting. The scanning electron microscopy, x-ray diffraction, tensile test, and magnetic measurements were used to investigate microstructure, phase structure, adhesion, and magnetic properties of the deposited coatings. The results showed that after using dry-ice blasting, the oxidation and porosity decreased and the atmospheric plasma-sprayed Fe-40Al coatings exhibited a soft ferromagnetic character with lower coercivity and higher saturation magnetization due to their lower degree of order. The plasma-sprayed Fe-40Al coating from the nanostructured feedstock has a very high adhesive strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metallic Glasses and Amorphous Alloys · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. C.T. Liu, E.P. George, P.J. Maziasz, and J.H. Schneibel, Recent Advances in B2 Iron Aluminide Alloys: Deformation, Fracture and Alloy Design, Mater. Sci. Eng. A, 1998, 258(1-2), p 84-9810.1016/S0921-5093(98)00921-6 ↗
2. C. Totemeier, R.N. Wright, and W.D. Swank, Microstructure and Stresses in HVOF Sprayed Iron Aluminide Coatings, J. Therm. Spray Technol., 2002, 11(3), p 400-40810.1361/105996302770348808 ↗
3. C.J. Li, H.T. Wang, G.J. Yang, and C.G. Bao, Characterization of High-Temperature Abrasive Wear of Cold-Sprayed FeAl Intermetallic Compound Coating, J. Therm. Spray Technol., 2011, 20(1-2), p 227-23310.1007/s11666-010-9545-5 ↗
4. L. Zhu, N. Zhang, B. Zhang, R. Bolot, H.L. Liao, and C. Coddet, In Situ Synthesis of FeAl Dense Coatings by Very Low Pressure Reactive Plasma Spraying, J. Therm. Spray Technol., 2013, 22(2-3), p 90-9510.1007/s11666-012-9851-1 ↗
5. C. Mangler, C. Gammer, K. Hiebl, H.P. Karnthaler, and C. Rentenberger, Thermally Induced Transition from a Ferromagnetic to a Paramagnetic State in Nanocrystalline FeAl Processed by High-Pressure Torsion, J. Alloys Compd., 2011, 509, p 389-39210.1016/j.jallcom.2010.12.023 ↗
6. R. Brajpuriya, P. Sharma, S. Jani, S. Kaimal, T. Shripathi, S.N. Lak, and K. Venugopalan, Correlation Between Microstructure, Magnetic and Electronic Properties of Fe1−x Al x (0.2 ≤ x ≤ 0.6) Alloys Produced by Arc Melting, Appl. Surf. Sci., 2010, 257, p 10-1610.1016/j.apsusc.2010.06.008 ↗
7. R. Bernal-Correa, A. Rosales-Rivera, P. Pineda-Gómez, and N.A. Salazar, Structural and Magnetic Properties of Fe60Al40 Alloys Prepared by Means of a Magnetic Mill, J. Alloys Compd., 2010, 495, p 491-49410.1016/j.jallcom.2009.08.085 ↗
8. M.J. Besnus, A. Herr, and A.J.P. Meyer, Magnetization of Disordered Cold-Worked Fe-Al Alloys up to 51 at.% Al, J. Phys., 1975, 5(11), p 2138-214710.1088/0305-4608/5/11/026 ↗
9. A.R. Yavari and D. Negri, Primary Crystallisation Phase Nucleation Regime in Amorphous Alloys is Non-Steady-State, J. Metastable Nanocryst. Mater., 1999, 1, p 63-6810.4028/www.scientific.net/JMNM.1.63 ↗
10. L. Del Bianco, A. Hernando, E. Bonetti, and E. Navarro, Grain-Boundary Structure and Magnetic Behavior in Nanocrystalline Ball-Milled Iron, Phys. Rev. B, 1997, 56, p 8894-890110.1103/PhysRevB.56.8894 ↗
11. Z.H. Zhang, Y.Z. Zhou, and E.J. Lavernia, Amorphization and Crystallization in Al-Ni-La during Mechanical Milling, J. Alloys Compd., 2008, 466, p 189-20010.1016/j.jallcom.2007.11.107 ↗
12. S. Gialanella, X. Amils, M.D. Baro, P. Delcroix, G. Lecaer, L. Lutterotti, and S. Surinach, Microstructural and Kinetic Aspects of the Transformations Induced in a FeAl Alloy by Ball-Milling and Thermal Treatments, Acta Mater., 1998, 46, p 3305-331610.1016/S1359-6454(97)00484-9 ↗
13. G. Valdrè, G.A. Botton, and L.M. Brown, High Spatial Resolution PEELS Characterization of FeAl Nanograins Prepared by Mechanical Alloying, Acta Mater., 1999, 47, p 2303-231110.1016/S1359-6454(99)00066-X ↗
14. M. Cherigui, N.E. Fenineche, A. Gupta, G. Zhang, and C. Coddet, Magnetic Properties of HVOF Thermally Sprayed Coatings Obtained from Nanostructured Powders, Surf. Coat. Technol., 2006, 201, p 1805-181310.1016/j.surfcoat.2006.03.008 ↗
15. S. Alleg, M. Ibrir, N.E. Fenineche, R. Bensalem, and J.J. Suñol, Microstructure and Magnetic Properties of HVOF Thermally Sprayed Fe75Si15B10 Coatings, Surf. Coat. Technol., 2010, 205, p 281-28610.1016/j.surfcoat.2010.06.042 ↗
16. B. Song, S.J. Dong, N.E. Fenineche, E. Aubry, T. Grosdidier, H.L. Liao, and C. Coddet, Microstructure and Magnetic Properties of Atmospheric Plasma Sprayed Fe-40Al Coating Obtained from Nanostructured Powders, Appl. Phys. A, doi: 10.1007/s00339-013-7593-710.1007/s00339-013-7593-7 ↗
17. B. Song, S.J. Dong, P. Coddet, B. Hansz, T. Grosdidier, H.L. Liao, and C. Coddet, Oxidation Control of Atmospheric Plasma Sprayed FeAl Intermetallic Coatings Using Dry-Ice Blasting, J. Therm. Spray Technol., 2013, 22(2-3), p 345-35110.1007/s11666-012-9840-4 ↗
18. S.J. Dong, B. Song, B. Hansz, H.L. Liao, and C. Coddet, Improvement in the Microstructure and Property of Plasma Sprayed Metallic, Alloy and Ceramic Coatings by Pre-/During-Treatment of Dry-Ice Blasting, Surf. Coat. Technol., 2013, 220, p 199-20310.1016/j.surfcoat.2012.03.071 ↗
19. S.J. Dong, B. Song, B. Hansz, H.L. Liao, and C. Coddet, Improvement in the Properties of Plasma-Sprayed Metallic, Alloy and Ceramic Coatings Using Dry-Ice Blasting, Appl. Surf. Sci., 2011, 257, p 10828-1083310.1016/j.apsusc.2011.07.113 ↗
20. T. Grosdidier, A. Tidu, and H.L. Liao, Nanocrystalline Fe-40Al Coating Processed by Thermal Spraying of Milled Powder, Scr. Mater., 2001, 44, p 387-39310.1016/S1359-6462(00)00611-4 ↗
21. S.J. Dong, B. Song, B. Hansz, H.L. Liao, and C. Coddet, Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats, J. Therm. Spray Technol., 2013, 22(1), p 61-6810.1007/s11666-012-9845-z ↗
22. S.J. Dong, B. Song, B. Hansz, H.L. Liao, and C. Coddet, Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings, J. Therm. Spray Technol., 2013, 22(2-3), p 213-22010.1007/s11666-012-9872-9 ↗
23. G.K. Wiliamson and W.H. Hall, X-ray Line Broadening from Filed Aluminium and Wolfram, Acta Mater., 1953, 1, p 22-3110.1016/0001-6160(53)90006-6 ↗
24. H.P. Klug and L.E. Alexander, X-ray Diffraction Procedure for Polycrystalline and Amorphous Materials, Wiley, New York, 1974
25. D. Negri, A.R. Yavari, and A. Deriu, Deformation Induced Transformations and Grain Boundary Thickness in Nanocrystalline B2 FeAl, Acta Mater., 1999, 47, p 4545-455410.1016/S1359-6454(99)00324-9 ↗
26. X.T. Luo and C.J. Li, Dual-Scale Oxide Dispersoids Reinforcement of Fe-40 at.%Al Intermetallic Coating for Both High Hardness and High Fracture Toughness, Mater. Sci. Eng. A, 2012, 555, p 85-9210.1016/j.msea.2012.06.037 ↗
27. G. Ji, J.P. Morniroli, and T. Grosdidier, Nanostructures in Thermal Spray Coatings, Scr. Mater., 2003, 18, p 1599-1604
28. S. Kuroda, Y. Tashiro, H. Yumoto, S. Taira, H. Fukanuma, and S. Tobe, Peening Action and Residual Stresses in High-Velocity Oxygen Fuel Thermal Spraying of 316L Stainless Steel, J. Therm. Spray Technol., 2001, 10(2), p 367-37410.1361/105996301770349457 ↗
29. S. Kuroda, J. Kawakita, M. Watanabe, and H. Katanoda, Warm Spraying: A Novel Coating Process Based on High-Velocity Impact of Solid Particles, Sci. Technol. Adv. Mater., 2008, 9(033002), p 1-17
30. M. Ranjbar-Far, J. Absi, G. Mariaux, and S. Shahidi, Effect of Residual Stresses and Prediction of Possible Failure Mechanisms on Thermal Barrier Coating System by Finite Element Method, J. Therm. Spray Technol., 2010, 19(5), p 1054-106110.1007/s11666-010-9512-1 ↗
31. P. Bengtsson and C. Persson, Modelled and Measured Residual Stresses in Plasma Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 1997, 92, p 78-8610.1016/S0257-8972(97)00082-0 ↗
32. R. Ghelichi, D. MacDonald, S. Bagherifard, H. Jahed, M. Guagliano, and B. Jodoin, Microstructure and Fatigue Behavior of Cold Spray Coated Al5052, Acta Mater., 2012, 60, p 6555-656110.1016/j.actamat.2012.08.020 ↗
33. E. Apinaniz, J.S. Garitaonandia, and F. Plazaola, Influence of Disorder on the Magnetic Properties of FeAl Alloys: Theory, J. Noncryst. Solids, 2001, 287, p 302-30710.1016/S0022-3093(01)00570-1 ↗
34. C.J. Li and A. Ohmori, Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits, J. Therm. Spray Technol., 2002, 11, p 365-37410.1361/105996302770348754 ↗
35. M. Cherigui, S. Guessasma, N. Fenineche, and C. Coddet, Neural Computation to Correlate HVOF Thermal Spraying Parameters with the Magnetic Properties of FeNb Alloy Deposits, Mater. Chem. Phys., 2005, 93, p 181-18610.1016/j.matchemphys.2005.03.042 ↗