journal article·2013-03Open access

Influence of Fine Powder Feedstock (−10 + 2 μm) on the HVOF Spraying Characteristics, Coating Morphology, and Properties of WC-CoCr 86-10-4

W. Tillmann, J. Nebel, W. Piotrowski

Journal of Thermal Spray Technology· Volume 22· Issue 2-3

Abstract

The use of fine feedstock powder can extend the feasibility and scope of HVOF coatings to new fields of applications. Especially for the purpose of near-net-shape coatings, these powders facilitate homogeneous layer morphologies, and smooth coating surfaces. However, the small particle sizes also lead to several challenges. One major issue is the in-flight behavior which is distinctly affected by the low mass and relatively large specific surface of the particles. In this paper, the in-flight and coating characteristics of WC-CoCr 86-10-4 (−10 + 2 μm) were investigated. It was determined that the fine powder feedstock shows a high sensitivity to the gas flow, velocity, and temperature of the spray jet. Because of their low mass inertia, their velocity, for example, is actually influenced by local pressure nodes (shock diamonds) in the supersonic flow. Additionally, the relatively large specific surface of the particles promotes partial overheating and degradation. Nevertheless, the morphological and mechanical properties of the sprayed layer are hardly affected. In fact, the coatings feature a superior surface roughness, porosity, hardness, and wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Flame retardant materials and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. W. Tillmann, E. Vogli, I. Baumann, B. Krebs, and J. Nebel, Wear-Protective Cermet Coatings for Forming Tools, Materialwiss. Werkstofftech., 2010, 41(7), p 597-60710.1002/mawe.201000647 ↗
2. W. Tillmann and I. Baumann, Development of Fine Structured Coatings for the Wear Protection of Deep Drawing Tools, SFB 708—Berichtsband 2007-2010, W. Tillmann and J. Nebel, Ed., Praxiswissen, Dortmund, 2010, p 21-38 ((in German))
3. B. Wielage, A. Wank, H. Pokhmurska, T. Grund, C. Rupprecht, G. Reisel, and E. Friesen, Development and Trends in HVOF Spraying Technology, Surf. Coat. Technol., 2006, 201(5), p 2032-203710.1016/j.surfcoat.2006.04.049 ↗
4. G. Matthaeus, W. Brandl, I. F. Secosan, G. Marginean, V. Chirila, and D. Ackermann, Standard HVOF Process Compared to the HVOF Process for Internal Coating with Fine Powders, Thermal Spray 2008: Crossing Borders, on CD-ROM, E. Lugscheider, Ed., May 2-4, 2008 (Maastricht), DVS Media, 2008, p 485-48810.31399/asm.cp.itsc2008p0473 ↗
5. X. Ma, J. Roth, D. Gandy, and G. Frederick, A New High-Velocity Oxygen Fuel Process for Making Finely Structured and Highly Bonded Inconel Alloy Layers from Liquid Feedstock, J. Therm. Spray Technol., 2006, 15(4), p 670-67510.1361/105996306X147090 ↗
6. L. Zhao, M. Maurer, F. Fischer, and E. Lugscheider, Study of HVOF Spraying of WC-CoCr Using On-line Particle Monitoring, Surf. Coat. Technol., 2004, 185(2-3), p 160-16510.1016/j.surfcoat.2003.12.024 ↗
7. J. Berghaus, B. Marple, and C. Moreau, Suspension Plasma Spraying of Nanostructured WC-12Co Coatings, J. Therm. Spray Technol., 2006, 15(4), p 676-68110.1361/105996306X147072 ↗
8. P. Fauchais, G. Montavon, and G. Bertrand, From Powders to Thermally Sprayed Coatings, J. Therm. Spray Technol., 2010, 19(1), p 56-8010.1007/s11666-009-9435-x ↗
9. C. Lyphout, P. Nylen, and L. Östergren, Relationships Between Process Parameters, Microstructure, and Adhesion Strength of HVOF Sprayed IN718 Coatings, J. Therm. Spray Technol., 2011, 20(1-2), p 76-8210.1007/s11666-010-9543-7 ↗
10. T. Ba, C. Kang, and H. Ng, Numerical Study of the Plasma Flow Field and Particle In-flight Behavior with the Obstruction of a Curved Substrate, J. Therm. Spray Technol., 2009, 18(5), p 858-87410.1007/s11666-009-9395-1 ↗
11. V.R. Srivatsan and A. Dolatabadi, Simulation of Particle-Shock Interaction in a High Velocity Oxygen Fuel Process, J. Therm. Spray Technol., 2006, 15(4), p 481-48710.1361/105996306X147126 ↗
12. B. Samareh and A. Dolatabadi, A Three-Dimensional Analysis of the Cold Spray Process: The Effects of Substrate Location and Shape, J. Therm. Spray Technol., 2007, 16(5), p 634-64210.1007/s11666-007-9082-z ↗
13. V. Shukla, G. Elliott, and B. Kear, Nanopowder Deposition by Supersonic Rectangular Jet Impingement, J. Therm. Spray Technol., 2000, 9(3), p 394-39810.1361/105996300770349854 ↗