journal article·2014-01

Metal Matrix Composites Deposition in Twin Wire Arc Spraying Utilizing an External Powder Injection Composition

W. Tillmann, M. Abdulgader, L. Hagen, J. Nellesen

Journal of Thermal Spray Technology· Volume 23· Issue 1-2
Publisher page

Abstract

The powder injection parameters, the location of the injection port, as well as the metal matrix composites are important features, which determine the deposition efficiency and embedding behavior of hard materials in the surrounding matrix of the twin wire arc-spraying process. This study investigates the applicability of external powder injection and aims to determine whether the powder injection parameters, the location, and the material combination (composition of the matrix as well as hard material) need to be specifically tailored. Therefore, the position of the injection port in relation to the arc zone was altered along the spraying axis and perpendicular to the arc. The axial position of the injection port determines the thermal activation of the injected powder. An injection behind the arc, close to the nozzle outlet, seems to enhance the thermal activation. The optimal injection positions of different hard materials in combination with zinc-, nickel- and iron-based matrices were found to be closer to the arc zone utilizing a high-speed camera system. The powder size, the mass of the particle, the carrier gas flow, and the electric insulation of the hard material affect the perpendicular position of the radial injection port. These findings show that the local powder injection, the wetting behavior of particles in the realm of the molten pool as well as the atomization behavior of the molten pool all affect the embedding behavior of the hard material in the surrounded metallic matrix. Hardness measurement by means of nanoindentation and EDX analysis along transition zones were utilized to estimate the bonding strength. The observation of a diffusion zone indicates a strong metallurgical bonding for boron carbides embedded in steel matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. B. Drößler, L. Engl, Fr.-W. Bach, and K. Möhwald, Technik und Potenziale des Verschleißschutzes mittels Thermisch Gespritzter Beschichtungen, Materialwiss. Werkstofftech., 2005, 36(8), p 353-35910.1002/mawe.200500892 ↗
2. J. Wilden, A. Schwenk, and J.-P. Bergmann, Supersonic Nozzles of Wire Arc Spraying, Proceedings of the International Thermal Spray Conference, 2005, p 1068-107310.31399/asm.cp.itsc2005p1068 ↗
3. M.L. Thorpe, Thermal Spray Applications Grow, Adv. Mater. Process., 1988, 134(4), p 69
4. E. Sampson and M. Zwetsloot, Arc Spray Process for the Aircraft and Stationary Gas Turbine Industry, J. Therm. Spray Technol., 1997, 6(2), p 150-15210.1007/s11666-997-0006-8 ↗
5. B. Krebs, Konturgenaue Bauteilbeschichtung für den Verschleißschutz mittels Atmosphärischen Plasma-spritzens und Lichtbogenspritzens, Werkstofftechnologische Schriftenreihe, 4, Essen, Vulkan-Verl., 2011
6. J. Wilden, J.P. Bergmann, and S. Jahn, Einfluss der Strom-Spannungs-Charakteristik auf die Schichtbildung und -Eigenschaften beim Lichtbogenspritzen, Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, 2004, 18, p 95-100
7. K. Nassenstein and G. Tegeder, Lichtbogenspritzen—Arc Spraying, Moderne Beschichtungsverfahren, 2. Neubearbeite Auflage, 1996, p 71-85
8. W. Tillmann, E. Vogli, and M. Abdulgader, Graded Twin Wire Arc Sprayed Coatings, Proceedings of the International Thermal Spraying Conference, 2010, p 628-633
9. W. Tillmann, S. Momeni, and M. Abdulgader, Particle Formation and Metal Break-Up of the Wires in the Twin Wire Arc Spraying, Proceedings of the International Conference on Welding and Joining of Materials, 2010
10. J. Wilden, J.P. Bergmann, and S. Jahn, A New Method for the Production of Particle Reinforced Coatings, Thermal Spray 2007, Global Solutions, p 359-36410.31399/asm.cp.itsc2007p0359 ↗
11. G. Barbezat and C. Warnecke, Method and an Apparatus for Arc Spraying. United States Patent, No. US 7,019,249 B2, 2006
12. W. Tillmann, B. Krebs, and L. Hagen, Modifikation der Lichtbogenspritztechnik –Anwendungsbezogene Düsenmodifikation einer Lichtbogenspritzpistole–, SFB 708 Berichtsband 2007-2010; 3D-Surface Engineering für Werkzeugsysteme der Blechformteilefertigung, W. Tillmann and J. Nebel Ed., 2010, p 7-18
13. M. Aizenshtein et al., Interface Interaction in the B4C/(Fe-B-C) System, Mater. Sci. Eng., 2008, 495(1-2), p 70-7410.1016/j.msea.2007.06.100 ↗