Fuzzy Logic Analysis of Alumina-Titania Deposition Yield During APS Process
Source abstract
Abstract
Abstract The behavior modeling of Atmospheric Plasma Spray (APS) process requires a global approach which considers interrelated non-linear relationships between coating characteristics / properties in-service and process parameters (power, feedstock injection, kinematics, etc.). Such an approach would permit to reduce the development costs. To reach this objective, the knowledge of the interactions between process parameters plays a relevant role in the optimization. This work intends to develop a behavior model based on fuzzy logic concepts. Here, the model considers the deposition yield as the result of the process and it establishes relationships with power process parameter (arc current intensity, plasma gas total flow rate, hydrogen content) on the basis of fuzzy rules. The model hence permits to discriminate the role and the effects of each power process parameters. The modeling results are compared to experimental data. The specific case of the deposition of alumina-titania (Al2O3-TiO2, 13% by weight) by Atmospheric Plasma Spraying (APS) is considered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lubricants and Their Additives · Metal and Thin Film Mechanics · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. L. Pejryd, J. Wigren, D.J. Greving, J.R. Shadley, E.F. Rybicki, Residual Stresses as a Factor in the Selection of Tungsten Carbide Coatings for a Jet Engine Application, J. Therm. Spray Technol., Vol. 4, 1995, p. 268–27410.1007/BF02646970 ↗
2. H. Zhang, H.B. Xiong, and L.L. Zheng, Partially Melted and its Splat Morphology, Thermal Spray 2003: Advancing the Science and Applying the Technology, B.R. Marple and C. Moreau, Ed., May 5-8, 2003 (Orlanda, USA), ASM International, 2003, p 905-91110.31399/asm.cp.itsc2003p0905 ↗
3. V. Srinivasan, A. Vaidya, T. Streibl, M. Friis, S. Sampath, On the Reproducibility of air Plasma Process and Control of Particle State, J. Therm. Spray Technol., Vol. 15 (No. 4), 2006, p. 739–74310.1361/105996306X147199 ↗
4. M. Friis, C. Persson, Control of Thermal Spray Processes by Means of Process Maps and Process Windows, J. Therm. Spray Technol., Vol. 12 (No. 1), 2003, p. 44–5210.1361/105996303770348492 ↗
5. S. Guessasma, G. Montavon, C. Coddet, Neural Computation to Predict In-flight Particle Characteristic Dependences from Processing Parameters in the APS Process, J. Therm. Spray Technol., Vol. 13 (No. 4), 2004, p. 570–58510.1361/10599630419391 ↗
6. G. Montavon, C. Coddet, C.C. Berndt, S.H. Leigh, Microstructural Index to Quantify Thermal Spray Deposit Microstructures Using Image Analysis, J. Therm. Spray Technol., Vol. 7 (No. 2), 1998, p. 229–24110.1361/105996398770350972 ↗
7. H. Sun, L. Liu, A Linear Output Structure for Fuzzy Logic Controllers, Fuzzy Sets Syst., Vol. 131 (No. 2), 2002, p. 265–27010.1016/S0165-0114(02)00110-0 ↗
8. C.L. Chen, P.C. Chen, C.K. Chen, Analysis and Design of Fuzzy Control System, Fuzzy Sets Syst., Vol. 57 (No. 2), 1993, p. 125–14010.1016/0165-0114(93)90152-8 ↗
9. S.O.T. Ogaji, L. Marinai, S. Sampath, R. Singh, S.D. Prober, Gas-turbine Fault Diagnostics: A Fuzzy-logic Approach, Appl. Energy, Vol. 82 (No. 1), 2005, p. 81–8910.1016/j.apenergy.2004.07.004 ↗
10. M. Liang, T. Yeap, A. Hermansyah, S. Rahmati, Fuzzy Control of Spindle Torque for Industrial CNC Machining, Int. J. Mach. Tools Manuf., Vol. 43 (No. 14), 2003, p. 1497–150810.1016/S0890-6955(03)00166-4 ↗
11. J.I. Horiuchi, M. Kishimoto, Application of Fuzzy Control to Industrial Bioprocesses in Japan, Fuzzy Sets Syst., Vol. 128 (No. 1), 2002, p. 117–12410.1016/S0165-0114(01)00090-2 ↗
12. T Fraichard, P. Garnier, Fuzzy Control to Drive Car-like Vehicles, Robot. Auton. Syst., Vol. 34 (No.1), 2001, p. 1–2210.1016/S0921-8890(00)00096-8 ↗
13. E.H. Mamdani, S. Assilian, An Experiment in Linguistic Synthesis with a Fuzzy Logic Controller, Int. J. Man-Machine Studies, Vol. 7 (No. 1), 1975, p. 1–1310.1016/S0020-7373(75)80002-2 ↗
14. L.A. Zadeh, Outline of a New Approach to the Analysis of Complex Systems and Decision Processes, IEEE Trans. Syst. Man Cybern., Vol. 3 (No. 1), 1973, p. 28–4410.1109/TSMC.1973.5408575 ↗
15. R. Kingswell, K.T. Scott, L.L. Wassell, Optimizing the Vacuum Plasma Spray Deposition of Metal, Ceramic and Cermet Coatings Using Designed Experiments, J. Therm. Spray Technol., Vol. 2 (No. 2), 1993, p. 179–18510.1007/BF02652027 ↗
16. M. Prystay, P. Gougeon, C. Moreau, Structure of Plasma Sprayed Zircona Coatings Tailored by Controlling the Temperature and Velocity of the Sprayed Particles, J. Therm. Spray Technol., Vol. 10 (No. 1), 2001, p. 67–7510.1361/105996301770349529 ↗
17. M. Friis, C. Persson, J. Wigren, Influence of Particle In-flight Characteristics on the Microstructure of Atmospheric Plasma Sprayed Yttria Stabilized ZrO2, Surf. Coat. Technol., Vol. 141 (No. 2/3), 2001, p. 115–12710.1016/S0257-8972(01)01239-7 ↗
18. E. Pfender, Fundamental Studies Associated with the Plasma Spray Process, Surf. Coat. Technol., Vol. 34 (No. 1), 1988, p. 1–1410.1016/0257-8972(88)90083-7 ↗
19. D.R. Marsh, N.E. Weare, D.L. Walker, Process Variables in Plasma-jet Spraying, J. Met., Vol. 2, 1961, p. 473–478