The Effect of Heat Treatment on Mechanical Properties of Thermally Sprayed Sandwich Structure Beams
Source abstract
Abstract
The application of metallic foam core sandwich structures in engineering components has been of particular interest in recent years because of their unique mechanical and thermal properties. Thermal spraying of the skin on the foam structure has recently been employed as a novel cost-efficient method for fabrication of these structures from refractory materials with complex shapes that could not otherwise be easily fabricated. The mechanical behavior of these structures under flexural loading is important in most applications. Previous studies have suggested that heat treatment of the thermally sprayed sandwich structures could improve the ductility of the skins and so affect the failure mode. In the present study, the mechanical behavior of sandwich beams prepared from arc sprayed alloy 625 skin on 40 ppi nickel foam was characterized under four point bending. The ductility of the arc sprayed alloy 625 coatings was improved after heat treatment at 1100 and 900 °C while the yield point was reduced. Heat treatment of the sandwich beams reduced the danger of catastrophic failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. J. Banhart, Manufacture, Characterisation and Application of Cellular Metals and Metal Foams, Prog. Mater. Sci., 2001, 46(6), p 559-63210.1016/S0079-6425(00)00002-5 ↗
2. J. Banhart and W. Brinkers, Fatigue Behavior of Aluminum Foams, J. Mater. Sci. Lett., 1999, 18, p 617-61910.1023/A:1006646901741 ↗
3. H.R. Salimijazi, L. Pershin, T.W. Coyle, J. Mostaghimi, and S. Chandra, Metal Foam Sandwich Structure as a High Temperature Heat Exchanger, 2008 International Thermal Spray Conference & Exposition, Vol. 1, 2008.10.31399/asm.cp.itsc2008p0351 ↗
4. H.R.S. Jazi, J. Mostaghimi, S. Chandra, L. Pershin, and T. Coyle, Spray-Formed, Metal-Foam Heat Exchangers for High Temperature Applications, J. Therm. Sci. Eng. Appl., 2009, 1(3), p 03100810.1115/1.4001049 ↗
5. F. Azarmi, J. Saaedi, T.W. Coyle, and J. Mostaghimi, Microstructure Characterization of Alloy 625 Deposited on Nickel Foam Using Air Plasma Spraying, Adv. Eng. Mater., 2008, 10(5), p 459-46510.1002/adem.200700196 ↗
6. S. Salavati, R. Rezaey, L. Pershin, T.W. Coyle, and J. Mostaghimi, Development of High Density Twin Wire Arc Sprayed Coatings on Metallic Foam Substrates a b, Proceedings of the International Thermal Spray Conference, 2013, p 345–350.10.31399/asm.cp.itsc2013p0345 ↗
7. F. Azarmi, T. Coyle, and J. Mostaghimi, Young’s Modulus Measurement and Study of the Relationship Between Mechanical Properties and Microstructure of Air Plasma Sprayed Alloy 625, Surf. Coat. Technol., 2009, 203(8), p 1045–105410.1016/j.surfcoat.2008.09.035 ↗
8. P. Callus and C. Berndt, Relationships Between the Mode II, Fracture Toughness and Microstructure of Thermal Spray Coatings, Surf. Coat. Technol., 1999, 114(2–3), p 114-12810.1016/S0257-8972(99)00018-3 ↗
9. ASTM international, Standard Test Method for Flexural Properties of Sandwich Constructions, Annual Book of ASTM Standards, ASTM international, 2000.
10. S. Deshpande, A. Kulkarni, S. Sampath, and H. Herman, Application of Image Analysis for Characterization of Porosity in Thermal Spray Coatings and Correlation with Small Angle Neutron Scattering, Surf. Coat. Technol., 2004, 187(1), p 6-1610.1016/j.surfcoat.2004.01.032 ↗
11. S.S. Madaeni, M.E. Aalami-Aleagha, and P. Daraei, Preparation and Characterization of Metallic Membrane Using Wire Arc Spraying, J. Memb. Sci., 2008, 320(1–2), p 541-54810.1016/j.memsci.2008.04.051 ↗
12. A. Belenky and D. Rittel, Static and Dynamic Flexural Strength of 99.5% Alumina: Relation to Porosity, Mech. Mater., 2012, 48, p 43-5510.1016/j.mechmat.2012.01.006 ↗
13. K. Kanny and H. Mahfuz, Flexural Fatigue Characteristics of Sandwich Structures at Different Loading Frequencies, Compos. Struct., 2005, 67(4), p 403-41010.1016/j.compstruct.2004.01.021 ↗
14. F. Azarmi, T.W. Coyle, and J. Mostaghimi, Flexural Properties of Sandwich Beams Consisting of Air Plasma Sprayed Alloy 625 and Nickel Alloy Foam, J. Mater. Sci., 2009, 44(11), p 2836-284310.1007/s10853-009-3375-1 ↗
15. F. Azarmi, T.W. Coyle, and J. Mostaghimi, Evaluation of the Flexural Rigidity of Sandwich Structures Using Experimentally Obtained Mechanical Properties of the Constituents, J. Therm. Spray Technol., 2009, 19(1–2), p 429-438
16. M. Styles, P. Compston, and S. Kalyanasundaram, The effect of Core Thickness on the Flexural Behaviour of Aluminium Foam Sandwich Structures, Compos. Struct., 2007, 80(4), p 532-53810.1016/j.compstruct.2006.07.002 ↗
17. H.R.S. Jazi, T.W. Coyle, and J. Mostaghimi, Understanding Grain Growth and Pore Elimination in Vacuum-Plasma-Sprayed Titanium Alloy, Metall. Mater. Trans. A, 2007, 38(3), p 476-48410.1007/s11661-006-9075-4 ↗
18. C. Godoy, E.A. Souza, M.M. Lima, and J.C.A. Batista, Correlation Between Residual Stresses and Adhesion of Plasma Sprayed Coatings: Effects of a Post-annealing Treatment, Thin Solid Films, 2002, 420-421, p 438-44510.1016/S0040-6090(02)00805-2 ↗