journal article·2013-03

Quality Prediction of Twin Wire Arc Sprayed Coatings Using Acoustic Emission Analysis

W. Tillmann, M. Abdulgader, G. Wang, R. Zielke

Journal of Thermal Spray Technology· Volume 22· Issue 2-3
Publisher page

Abstract

In this work, acoustic emission analysis is utilized in the twin wire arc spraying (TWAS) process to study the influence of the adjustable process parameters on the simultaneously obtained acoustic signals at the nozzle and at the substrate. The amplitude of recorded signals at the substrate was in general much higher than those recorded at the nozzle. At the substrate side, the amplitude of emitted acoustic signals is dependent on feedstock materials and is higher when using solid wires. The acoustic signals were recorded at the spraying gun for different gas pressures without arc ignition (as dry runs) in order to reveal the effect of the arc on the emitted acoustic signals. A correlation between controllable parameters, the acoustic signals, and the obtained in-flight particle characteristics was observed. This work contributes to the online control of TWAS processes and is one of many proposed publications in the research field of the conducted acoustic emission analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. M.L. Thorpe and H.J. Richter, A Pragmatic Analysis and Comparison of the HVOF Process, Proceedings of the 13th International Thermal Spraying Conference, Thermal Spray: International Advances in Coatings Technology, Orlando, FL, ASM International, 1992, p 137-147
2. J. Wilden, A. Wank, and F. Schreiber, Wires for Arc- and High Velocity Flame Spraying—Wire Design, Materials and Coatings Properties, Thermal Spray: Surface Engineering via Applied Research, C.C. Berndt, Ed., (Montréal, Québec, Canada), ASM International, Materials Park, OH, USA, 2000, p 609/61710.31399/asm.cp.itsc2000p0609 ↗
3. M. Nakagawa, K. Shimoda, T. Tomoda, M. Koyama, Y. Ishikawa, and T. Nakajima, Development of Mass Production Technology of Arc Spraying for Automotive Engine Aluminum Alloy Valve Lifters, Thermal Spray Research and Applications, T.F. Bernecki, Ed., 1990 (Long Beach, California), ASM International, Materials Park, OH, USA, 1991, p 457/464
4. A. Pourmousa, A. Abedini, J. Mostaghimi, and S. Chandra, Particle Diagnostics in Wire-Arc Spraying System, Thermal Spray 2004: Advances in Technology and Application, ASM International Osaka, Japan, ASM International, 2004, p 962/96810.31399/asm.cp.itsc2004p0962 ↗
5. M.P. Planche, H. Liao, and C. Coddet, Relationships between In-Flight Particle Characteristics and Coating Microstructure with a Twin Wire Arc Spray Process and Different Working Conditions, Surf. Coat. Technol., 2004, 182, p 215-22610.1016/S0257-8972(03)00873-9 ↗
6. G. Jandin, H. Liao, Z.Q. Feng, and C. Coddet, Correlations Between Operating Conditions, Microstructure and Mechanical Properties of Twin Wire Arc Sprayed Steel Coatings, Material Science Engineering, 2003, Issue A349, p 298/30510.1016/S0921-5093(02)00767-0 ↗
7. X. Wang, D. Zhuang, E. Pfender, J. Heberlein, and W. Gerberich, Effect of Atomizing Gas Pressure on Coating Properties in Wire Arc Spray, Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, Ed., ASM International, 1994, p 587/592
8. A.M. Kamara and K. Davey, A Numerical and Experimental Investigation into Residual Stress in Thermally Sprayed Coatings, Int. J. Solids Struct., 2007, 44, p 8532-855510.1016/j.ijsolstr.2007.06.031 ↗
9. A.F. Kanta, G. Montavon, M.P. Planche, and C. Coddet, In-Flight Particle Characteristics Control by Implementing a Fuzzy Logic Controller, Surf. Coat. Technol., 2008, 202, p 4479-448210.1016/j.surfcoat.2008.04.030 ↗
10. G. Reuss, “Beitrag zur Überwachung des thermischen Spritzprozesses mittels Schallemissionsanalyse (SEA)”, (Contribution to the Monitoring of the Thermal Spray Process Using Acoustic Emission Analysis), Ph.D. Thesis, Dortmund University, 2001 (in German)
11. W. Tillmann and M. Abdulgader, Prozessinstabilität Beim Lichtbogenspritzen Und Deren Effekt Auf Die Partikelcharakteristiken Und Den Schichtaufbau (Instability in Twin Wire Arc Spraying Processes and Its Effect on the Particle Characteristics and the Layer Structure), Proc. 4. Öffentliches Kolloquim SFB 708 Kollkium, 2011, p 103-114
12. T. Watanabe, X. Wang, J. Heberlein, E. Pfender, and W. Herwig, Voltage and Current Fluctuations in Wire Arc Spraying as Indications for Coating Properties, Thermal Spray, Practical Solutions for Engineering Problems, C.C. Berndt, Ed., ASM International, Materials Park, OH, 1996,
13. M. Friis, C. Persson, and J. Wigren, Influence of Particle In-Flight Characteristics on the Microstructure of Atmospheric Plasma Sprayed Yttria Stabilized ZrO2, Surf. Coat. Technol., 2001, 141, p 115-12710.1016/S0257-8972(01)01239-7 ↗