Durability of Titanium/Dicalcium Silicate Composite Coatings in Simulated Body Fluid
Source abstract
Abstract
Titanium/dicalcium silicate composite coatings with different ratios (weight ratios as Ca2SiO4: Ti = 3:7, 5:5, 7:3) were prepared by plasma spraying. Effects of titanium addition on coating properties, such as bonding strength, flexural modulus, and dissolution in simulated physiological environment, were studied. Results showed that the bonding strength between coating and Ti-6Al-4V substrate increased with increase of titanium content in the composite coatings. It was explained by the narrowed dissimilarity of thermal expansion coefficients between the coatings and substrates. Degradation of mechanical properties after immersion in simulated body fluid was also studied. The dissolution of dicalcium silicate in the composite coatings resulted in the decrease of flexural strength and flexural modulus of the coatings in the simulated physiological environment. The higher titanium content in the composite coatings, the stabler are the composite coatings in the physiological environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. E. Carlisle, Silicon as an Essential Trace Element in Animal Nutrition, Silicon Biochemistry, D. Evered and M. O’Connor et al., Eds., 1986, p 123-13910.1002/9780470513323.ch8 ↗
2. M. Hidebrand, D. Higgins, K. Busser, B. Volcani, Silicon Responsive c-DNA Clone Isolated from the Marine Diatom Cylindrotheca fusiformis, Gene, (1993), 132, p 213-21510.1016/0378-1119(93)90198-C ↗
3. V. Milan, Effect of Wollastonite Substitute in a Semivitreous Dinnerware Body, J. Am. Ceram. Soc., 1956, 39, p 323-32910.1111/j.1151-2916.1956.tb15597.x ↗
4. H. Shwiete, W. Kronert, K. Deckert, Existence Range and Stabilization of High Temperature Modification of Dicalcium Silicate, Zement Kalk Gips, 1968, 9, p 359-366
5. I. Nettleship, J. Shull, W. Kriven, Chemical Preparation and Phase Stability of Ca2SiO4 and Sr2SiO4 Powders, J. Eur. Ceram. Soc., 1993, 11, p 291-29810.1016/0955-2219(93)90028-P ↗
6. P. Valertio, M. Pereira, A. Goes, M. Letite, The Effect of Ionic Products from Bioactive Glass Dissolution on Osteoblast Proliferation and Collagen Production, Biomaterials, 2004, 25, p 2941-294810.1016/j.biomaterials.2003.09.086 ↗
7. P. de Aza, F. Grititan, S. de Aza, Bioactivity of Wollastonite Ceramics: In Vitro Evaluation. Scripta. Metall. Mater., 1994, 31, p 1001-100510.1016/0956-716X(94)90517-7 ↗
8. Y. Xie, X. Liu, X. Zheng, C. Ding, Bioactivity of Plasma Sprayed Dicalcium Silicate/Titanium Composite Coatings on Ti-6Al-4V Alloy, Surf. Coat. Technol., 2005, 199, p 105-11110.1016/j.surfcoat.2004.11.034 ↗
9. P. de Aza, F. Guitian, S. de Aza, Bioeutectic: A New Ceramic Material for Human Bone Replacement, Biomaterials, 1997, 18, p 1285-128910.1016/S0142-9612(97)00063-X ↗
10. P. de Aza, Z. Luklinska, M. Anseau, M. Hector, F. Guitian, S. de Aza, Reactivity of a Wollastonite–Tricalcium Phosphate Bioeutectic® Ceramic in Human Parotid Saliva, Biomaterials, 2000, 21, p 1735-174110.1016/S0142-9612(00)00058-2 ↗
11. P. Siriphannon, S. Hayashi, A. Yasumori, K. Okada, Preparation and Sintering of CaSiO3 from Coprecipitated Powder Using NaOH as Precipitant and its Apatite Formation in Simulated Body Fluid Solution, J. Mater. Res., 1999, 14, p 529-53610.1557/JMR.1999.0076 ↗
12. X. Liu, C. Ding, Apatite Formed on the Surface of Plasma-Sprayed Wollastonite Coating Immersed in Simulated Body Fluid, Biomaterials, 2001, 22, p 2007-201210.1016/S0142-9612(00)00386-0 ↗
13. X. Liu, S. Tao, C. Ding, Bioactivity of Plasma Sprayed Dicalcium Silicate Coatings, Biomaterials, 2002, 23, p 963-96810.1016/S0142-9612(01)00210-1 ↗
14. J. Oliveira, R. Correia, M. Fernandes, Effects of Si Speciation on the In Vitro Bioactivity of Glasses, Biomaterials, 2002, 23, p 371-37910.1016/S0142-9612(01)00115-6 ↗
15. H. Li, K. Khor, P. Cheang, Effect of Steam Treatment During Plasma Spraying on the Microstructure of Hydroxylapatite Splats and Coatings, J. Thermal. Spray. Technol., 2006, 15, p 6106-616
16. C. Chu, P. Lin, Y. Dong, X. Zhu, Z. Yin, Fabrication and Characterization of Hydroxylapatite Reinforced with 20 vol% Ti Particles for Use as Hard Tissue Replacement, J. Mater. Sci: mater. Med., 2002, 13, p 985-992
17. D. Puleo, L. Holleran, R. Doremus, R. Bizios, Osteoblast Responses to Orthopedic Implant Materials In Vitro, J. Biomed. Mater. Res., 1991, 25, p 711-71510.1002/jbm.820250603 ↗
18. D. Cohn and G. Wong, Skeletal Research, D. Simmons and A. Kunin, Eds., 1979, New York, p 3-2010.1016/B978-0-12-644150-5.50005-4 ↗
19. J. Blum, K. Eckert, A. Schroeder, M. Petitmeret, S. Ha, and E. Wintermantel, In Vitro Testing of Porous Titanium Dioxide Ceramics, Bioceramics, T. Kokubo, T. Nakamura, and F. Miyaji, Eds., 1996, Japan, p 89-92
20. ASTM C633, Standard Method of Test for Adhesive or Cohesive Strength of Flame-Sprayed Coatings, 19th Annual Book of ASTM Standards, Part 17, ASTM, Philadelphia, PA, 1969, p 636-642
21. ASTM E-855-90, Standard Test Methods for Bend Testing of Metallic Flat Materials for Sparing Applications Involving Static Loading. West. American Society for Testing Materials, Conshohocken, PA, 1990
22. Y. Yang, E. Chang, Influence of Residual Stress on Bonding Strength and Fracture of Plasma-Sprayed Hydroxylapatite Coatings on Ti–6Al–4V Substrate, Biomaterials, 2001, 22, p 1827-183610.1016/S0142-9612(00)00364-1 ↗
23. J. Breme, Y. Zhou, L. Groh, Development of a Titanium Alloy Suitable for an Optimized Coating with Hydroxylapatite, Biomaterials, 1995, 16, p 239-24410.1016/0142-9612(95)92123-N ↗
24. Mechanical Engineering Handbook, Mechanical industry press, 1996 (Beijing), p 4-46
25. K. Khor, P. Cheang, Y. Wang, Plasma Spraying of Combustion Flame Spheroidized Hygroxylapatite (HA) Powders, J. Therm. Spray Technol., 1998, 7, p 116-12110.1361/105996398770351007 ↗
26. K. Khor, C. Yip, P. Cheang, Ti-6Al-4V/Hydroxylapatite Composite Coatings Prepared by Thermal Spraying Techniques, J. Therm. Spray Technol., 1996, 6, p 109-11510.1007/BF02646320 ↗
27. J. Xu, H. Cheung, S. Shi, Mechanical Properties of Titanium Hydride, J. Alloy. Compd., 2007, 436, p 82-8510.1016/j.jallcom.2006.06.107 ↗
28. Z. Gou, J. Chang, W. Zhai, Preparation and Characterization of Novel Bioactive Dicalcium Silicate Ceramics, J. Eur. Ceram. Soc. 2005, 25, p 1507-151410.1016/j.jeurceramsoc.2004.05.029 ↗
29. J. Rodríguez, C. Baudín, P. Pena, Relationships Between Phase Constitution and Mechanical Behavior in MgO–CaZrO3–Calcium Silicate Materials, J. Eur. Ceram. Soc., 2004, 24, p 669-67910.1016/S0955-2219(03)00268-1 ↗
30. A. Gefen, Optimizing the Biomechanical Compatibility of Orthopedic Screws for Bone Fracture Fixation, Med. Eng. Phys., 2002, 24, p 337-34710.1016/S1350-4533(02)00027-9 ↗
31. V. Sergo, O. Sbaizero, R. David, D. Clarke, Mechanical and Chemical Consequences of the Residual Stresses in Plasma Sprayed Hydroxyapatite Coatings, Biomaterials, 1997, 18, p 477-48210.1016/S0142-9612(96)00147-0 ↗
32. Y. Yang, E. Chang, S. Lee, Mechanical Properties and Young’s Modulus of Plasmasprayed Hydroxyapatite Coating on Ti Substrate in Simulated Body Fluid, J. Biomed. Mater. Res., 2003, 67A, p 886-89910.1002/jbm.a.10145 ↗