journal article·2013-06

Fractal Evaluation on Effective Dielectric Properties for High-Velocity Oxygen Fuel Sprayed LBS-SiCβ Composite Absorber Coatings

Xiaojing Yuan, Bailin Zha, Hangong Wang

Publisher page

Abstract

An evaluation of microstructure-property relationship is important for thermally sprayed composite absorber coatings, because self-similarity in the microstructure is a key characteristic that can affect coating properties, such as flattened particle shape, pores, absorbent phase, and coating thickness. In this paper, a multiscale effective fractal model is reported to characterize the microstructure-property relationship for high-velocity oxygen fuel (HVOF) sprayed composite coatings. It shows the fractal of coating structure was presented to calculate the volume fraction of thermally sprayed absorber coatings with wavelet-fractal algorithm. As an example, the flattened particle shape, porosity, and thickness were researched for the microwave reflectivity coefficient of HVOF sprayed nanometer LBS (Li2O-B2O3-SiO2)-SiCβ composite coatings. The modeling approaches to establishing the relationships between coating microstructure and absorbing property was checked.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · High voltage insulation and dielectric phenomena · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. X. Yuan, H. Wang, G. Hou, L. Jiang, and C. Yao, The Nano α-Fe/Epoxy Resin Composite Absorber Coatings Fabricated by Thermal Spraying Technique, IEEE Trans. Magn., 2006, 42(9), p 2115-212010.1109/TMAG.2006.880686 ↗
2. M. Bégard, K. Bobzin, G. Bolelli, A. Hujanen, P. Lintunen, D. Lisjak, S. Gyergyek, L. Lusvarghi, M. Pasquale, K. Richardt, T. Schläfer, and T. Varis, Thermal Spraying of CO, Ti-Substituted Ba-Hexaferrite Coatings for Electromagnetic Wave Absorption Applications, Surf. Coat. Technol., 2009, 203(20-21), p 3312-331910.1016/j.surfcoat.2009.04.007 ↗
3. I. Tano, M. Gupta, N. Curry, P. Nylén, J. Wigren, and Trollhättan, Relationships between Coating Microstructure and Thermal Conductivity in Thermal Barrier Coatings—A Modeling Approach, Thermal Spray: Global Solutions for Future Application, Thermal Spray: Global Solutions for Future Application, K. Middeldorf, Ed., ASM International, Singapore, 2010, p 264-268
4. C.-J. Li, G.-J. Yang, and A. Ohmori, Relationship Between Particle Erosion and Lamellar Microstructure for Plasma-Sprayed Alumina Coatings, Wear, 2006, 260, p 1166-117210.1016/j.wear.2005.07.006 ↗
5. J. Wilden and H. Frank, Thermal Spraying—Simulation of Coating Structure, Thermal Spray: Building 100 Years of Success, B.R. Marple, Ed., ASM International, Seattle, WA, 2006, p 287-292
6. C.-J. Li and A. Ohmori, Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits, J. Therm. Spray Technol., 2002, 11(3), p 365-37410.1361/105996302770348754 ↗
7. M.K. Gupta, “Establishment of Relationships between Coating Microstructure and Thermal Conductivity in Thermal Barrier Coatings by Finite Element Modelling,” M.E. Thesis, West University, 2010, p 15-16
8. I. Tano, M. Gupta, N. Curry, P. Nylén, and J. Wigren, Relationships Between Coating Microstructure and Thermal Conductivity in Thermal Barrier Coatings—A Modelling Approach, Thermal Spray: Global Solutions for Future Application, K. Middeldorf, Ed., ASM International, Singapore, 2010, p 66-72
9. M. Li and P.D. Christofides, Modeling and Control of High-Velocity Oxygen-Fuel (HVOF) Thermal Spray: A Tutorial Review, J. Therm. Spray Technol., 2009, 18(5-6), p 753-76810.1007/s11666-009-9309-2 ↗
10. R. Ghafouri-Azar, J. Mostaghimi, and S. Chandra, Modeling Development of Residual Stresses in Thermal Spray Coatings, Comput. Mater. Sci., 2006, 35(1), p 13-2610.1016/j.commatsci.2005.02.007 ↗
11. W. Tillmann, B. Klusemann, J. Nebel, and B. Svendsen, Analysis of the Mechanical Properties of an Arc-Sprayed WC-FeCSiMn Coating: Nanoindentation and Simulation, J. Therm. Spray Technol., 2011, 20(1), p 328-33510.1007/s11666-010-9550-8 ↗
12. B. Klusemann, R. Denzer, and B. Svendsen, Microstructure Based Modeling of Residual Stresses in WC-12Co Sprayed Coatings, J. Therm. Spray Technol., 2012, 21(1), p 96-10710.1007/s11666-011-9690-5 ↗
13. K. Bobzin, N. Kopp, T. Warda, and M. Öte, Determination of the Effective Properties of Thermal Spray Coatings Using 2D and 3D Models, J. Therm. Spray Technol., 2012, 21(6), p 1269-127710.1007/s11666-012-9809-3 ↗
14. T. Wiederkehr, B. Klusemann, D. Gies, H. Müller, and B. Svendsen, An Image Morphing Method for 3D Reconstruction and FE-Analysis of Pore Networks in Thermal Spray Coatings, Comput. Mater. Sci., 2010, 47(4), p 881-88910.1016/j.commatsci.2009.11.019 ↗
15. S. Guessasma, G. Montavon, and C. Coddet, On the Implantation of the Fractal Concept to Quantify Thermal Spray Deposit Characteristics, Surf. Coat. Technol., 2003, 173(1), p 24-2810.1016/S0257-8972(03)00443-2 ↗
16. L. Jylhä, and A. Sihvola, Equation for the effective permittivity of particle-filled composites for material design applications, J. Phys. D: Appl. Phys., 2007, 40, p 4966-497310.1088/0022-3727/40/16/032 ↗
17. Y. Wang, “Effect of the Spray Particle State on the Adhesive Strength of High Velocity Oxy-Fuel Sprayed Coatings,” Ph.D. Thesis, Xi’an Jiaotong University, 2001, p 67-69
18. R. Sharman, J.M. Tyler, and O.S. Pianykh, A Fast and Accurate Method to Register Medical Images Using Wavelet Modulus Maxima, Pattern Recogn. Lett., 2000, 21, p 447-46210.1016/S0167-8655(00)00002-7 ↗
19. C. Parra, K. Iftekharuddin, and D. Rendon, Wavelet Based Estimation of the Fractal Dimension in fBm Images, Neural Engineering, March 20-22, 2003 (Capri Island, Italy), IEEE Conference Publications, 2003, p 533-53610.1109/CNE.2003.1196881 ↗
20. C. Heneghan, S.B. Lowen, and M.C. Teich, Two Dimensional Fractional Brownian Motion: Wavelet Analysis and Synthesis, Image Analysis and Interpretation, April 8-9, 1996 (San Antonio TX), IEEE Conference Publications, 1996, p 213-21710.1109/IAI.1996.493755 ↗
21. X. Yuan, H. Wang, and B. Zha, Submicron Fe/Polyamide Composite Absorber Coating by Low Temperature High Velocity Air Fuel Spray Technique, Surf. Coat. Technol., 2007, 201, p 7130-713710.1016/j.surfcoat.2007.01.026 ↗
22. D.V. Hahn, M.B. Thomas, and D.W. Blodgett, Characterization and Modeling of the Infrared Properties of Diamond and SiC, Window and Dome Technologies VIII, R.K. Tyson and M. Lloyd-Hart, Ed., Vol 5078 (2003) (San Diego, CA), SPIE, p 148-15810.1117/12.487875 ↗