A One-Dimensional Flow Model with Adiabatic Friction for Rapid Estimation of Cold Spray Flow Conditions
Source abstract
Abstract
While commercially available computational fluid dynamic packages are employed nowadays to analyze the spraying behavior of the cold spray (CS) system and optimize the nozzle geometry design, using these packages is often prohibitive because of complex computational resource requirements and expensive copyright licenses. This paper proposes a quick and economical method for predicting the performance of the CS system, while asking for minimal computational resource. A one-dimensional adiabatic friction model with the consideration of friction was developed to calculate the critical pressure of nozzles under different expansion ratios and the gas/particle velocity at different spraying conditions. The accuracy of the critical pressure calculation was evidenced by polymeric nozzle destructive tests. The particle velocities achieved from the nozzles with different expansion ratios were measured and compared with the velocity values calculated by the model. The suggested adiabatic friction model is validated by the well-matched values between the calculated results and the experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A.Papyrin, V. Kosavrew, S. Klinkov, A. Alkhimov, and V. Fomin, Cold Spray Technology, Elsevier, 2007
2. E. Irissou, J.G. Legoux, A.N. Ryabinin, B. Jodion, and C. Moreau, Review on Cold Spray Process and Technology: Part 1—Intellectual Property, J. Therm. Spray Technol., 2008, 17(4), p 495-51610.1007/s11666-008-9203-3 ↗
3. T.H. VanSteenkiste, Kinetic Spraying Coatings, Surf. Coat. Technol., 1999, 111, p 62-7110.1016/S0257-8972(98)00709-9 ↗
4. A. Sova, S. Grigoriev, A. Okunkova, and I. Smurov, Potential of Cold Gas Dynamic Spray as Additive Manufacturing Technology, Int. J. Adv. Manuf. Technol., 2013, 69, p 2269-227810.1007/s00170-013-5166-8 ↗
5. A. Alkhimov, V. Kosarev, and A. Papyrin, Gas Dynamic Method for Applying Coating; US patent 5 302 414; 04/12/1994
6. W.Y. Li, C.J. Li, and H. Liao, Effect of Annealing Treatment on the Microstructure and Properties of Cold-Sprayed Cu Coating, J. Therm. Spray Technol., 2006, 15(2), p 206-21110.1361/105996306X108066 ↗
7. R. Morgan, P. Fox, J. Pattison, C. Sutchliffe, and W. O’Neill, Analysis of Cold Gas Dynamically Sprayed Aluminum Deposties, Mater. Lett., 2004, 58(7–8), p 1317-132010.1016/j.matlet.2003.09.048 ↗
8. W. Wong, P. Vo, E. Irissou, A.N. Ryabinini, J.G. Legoux, and S. Yue, Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2013, 22(7), p 1140-115310.1007/s11666-013-9951-6 ↗
9. A. Bacciochini, M.I. Radulescu, M. Yandouzi, G. Maines, J.J. Lee, and B. Jodoin, Reactive Structural Materials Consolidated by Cold Srpay: Al-CuO Thermite, Surf. Coat. Technol., 2013, 226, p 60-6710.1016/j.surfcoat.2013.03.036 ↗
10. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-439410.1016/S1359-6454(03)00274-X ↗
11. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54(3), p 729-74210.1016/j.actamat.2005.10.005 ↗
12. F. Raletz, M. Vardelle, and G. Ezo’o, Critical Particle Velocity Under Cold Spray Conditions, Surf. Coat. Technol., 2006, 201(5), p 1942-194710.1016/j.surfcoat.2006.04.061 ↗
13. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7(2), p 205-21210.1361/105996398770350945 ↗
14. A. Haider and O. Levenspiel, Drag Coefficient and Terminal Velocity of Spherical and Nonspherical Particles, Powder Technol., 1989, 58, p 63-7010.1016/0032-5910(89)80008-7 ↗
15. V.F. Kosarvev, S.V. Klinkov, A.P. Alkhimov, and A.N. Papyrin, On Some Aspects of Gas Dynamics of the Cold Spray Process, J. Therm. Spray Technol., 2003, 12(2), p 265-28110.1361/105996303770348384 ↗
16. A.P. Alkhimov, V.F. Kosarev, and S.V. Klinkov, The Features of Cold Spray Nozzle Design, J. Therm. Spray Technol., 2001, 10(2), p 375-38110.1361/105996301770349466 ↗
17. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, and M.F. Simith, Particle Velocity and Deposition Efficiency in the Cold Spray Process, J. Therm. Spray Technol., 1999, 8(4), p 576-58210.1361/105996399770350278 ↗
18. J. Pattison, S. Celotto, A. Khan, and W.O. Neill, Standoff Distance and Bow Shock Phenomena in the Cold Spray Process, Surf. Coat. Technol., 2008, 202, p 1443-145410.1016/j.surfcoat.2007.06.065 ↗
19. R. Huang and H. Fukanuma, Study of the Influence of Particle Velocity on Adhesive Strength of Cold Spray Deposits, J. Therm. Spray Technol., 2012, 21(3–4), p 541-54910.1007/s11666-011-9707-0 ↗
20. R. Lupoi and W.O. Neill, Powder Stream Characteristics in Cold Spray Nozzles, Surf. Coat. Technol., 2011, 206, p 1069-107610.1016/j.surfcoat.2011.07.061 ↗
21. C.J. Li, W.Y. Li, and H.L. Liao, Examination of the Critical Velocity for Deposition of Particles in Cold Spraying, J. Therm. Spray Technol., 2006, 15(2), p 212-22210.1361/105996306X108093 ↗
22. J.J. Park, M.W. Lee, S.S. Yoon, H.Y. Kim, S.C. Jame, and S.D. Heister, Supersonic Nozzle Flow Simulations for Particle Coating Applications: Effects of Shockwaves, Nozzle Geometry, Ambient Pressure, and Substrate Location Upon Flow Characteristics, J. Therm. Spray Technol., 2011, 20(3), p 514-52210.1007/s11666-010-9542-8 ↗
23. M.W. Lee, J.J. Park, D.Y. Kim, S.S. Yoon, H.Y. Kim, and S.C. James, Numerical Studies on the Effects of Stagnation Pressure and Temperature on Supersonic Flow Characteristics in Cold Spray Applications, J. Therm. Spray Technol., 2011, 20(5), p 1085-109710.1007/s11666-011-9641-1 ↗
24. W.Y. Li and C.J. Li, Optimization of Spray Conditions in Cold Spraying Based on the Numerical Analysis of Particle Velocity, Trans. Non-Ferr. Met. Soc. China, 2004, 11(2), p 43-48
25. K. Sakaki and Y. Shimizu, Effect of the Increase in the Entrance Convergent Section Length of the Gun Nozzle on the High-Velocity Oxygen Fuel and Cold Spray Process, J. Therm. Spray Technol., 2001, 10(3), p 487-49610.1361/105996301770349268 ↗
26. V.K. Champagne, D.J. Helfritch, P.F. Leyman, R. Lempicki, and S. Grendahl, The Effects of Gas and Metal Charcteristics on Sprayed Metal Coatings, Model. Simul. Mater. Sci. Eng., 2005, 13, p 1-1010.1088/0965-0393/13/7/008 ↗
27. T. Stoltenhoff, H. Kreye, and H.J. Richter, An Analysis of the Cold Spray Process and Its Coatings, J. Therm. Spray Technol., 2002, 11(4), p 542-55010.1361/105996302770348682 ↗
28. B. Jodoin, Cold Spray Nozzle Mach Number Limitation, J. Therm. Spray Technol., 2002, 11(4), p 496-50710.1361/105996302770348628 ↗
29. W.Y. Li and C.J. Li, Optimal Design of a Novel Cold Spray Gun Nozzle at a Limited Space, J. Therm. Spray Technol., 2005, 14(3), p 391-39610.1361/105996305X59404 ↗
30. http://www.supersonicspray.com/
31. P.H. Oosthuizen and W.E. Carscallen, Compressible Fluid Flow, McGraw-Hill, New York, 1997
32. A.J. Smits and J.P. Dussauge, Turbulent Shear Layers in Supersonic Flow, Springer, New York, 2006
33. C.B. Henderson, Drag Coefficient of Spheres in Continuum and Rarefied Flows, AIAA J., 1970, 14(6), p 707-70810.2514/3.61409 ↗
34. S.A. Morsi and A.J. Alexandre, An Investigation of Particle Trajectories in Two-Phase Flow Systems, J. Fluid Mech., 1972, 55(2), p 193-20810.1017/S0022112072001806 ↗
35. F.A. Morrison, An Introduction to Fluid Mechanics, Cambridge University Press, New York, 201310.1017/CBO9781139047463 ↗
36. V.K. Champagne, D.J. Helfritch, S.P.G. Dinavahi, and P.F. Leyman, Theoretical and Experimental Particle Velocity in Cold Spray, J. Therm. Spray Technol., 2011, 20(3), p 425-43110.1007/s11666-010-9530-z ↗
37. B. Jodion, F. Raletz, and M. Vardelle, Cold Spray Modeling and Validation Using an Optical Diagnostic Method, Surf. Coat. Tech., 2006, 200, p 4424-443210.1016/j.surfcoat.2005.02.209 ↗
38. H. Katanoda, T. Matsuoka, and K. Matsuo, Experimental Study on Shock Wave Structures in Constant-Area Passage of Cold Spray Nozzle, J. Therm. Sci., 2007, 16(1), p 40-4510.1007/s11630-007-0040-3 ↗