Efficient Large-Scale Coating Microstructure Formation Using Realistic CFD Models
Source abstract
Abstract
For the understanding of physical effects during the formation of thermally sprayed coating layers and the deduction of the macroscopic properties of a coating, microstructure modeling and simulation techniques play an important role. In this contribution, a coupled simulation framework consisting of a detailed, CFD-based single splat simulation, and a large-scale coating build-up simulation is presented that is capable to compute large-scale, three-dimensional, porous microstructures by sequential drop impingement of more than 10,000 individual particles on multicore workstation hardware. Due to the geometry-based coupling of the two simulations, the deformation, cooling, and solidification of every particle is sensitive to the hit surface area and thereby pores develop naturally in the model. The single splat simulation employs the highly parallel Lattice-Boltzmann method, which is well suited for GPU-acceleration. In order to save splat calculations, the coating simulation includes a database-driven approach that re-uses already computed splats for similar underground shapes at the randomly chosen impact sites. For a fast database search, three different methods of efficient pre-selection of candidates are described and compared against each other.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lattice Boltzmann Simulation Studies · Fluid Dynamics and Heat Transfer · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. C.-J. Li and A. Ohmori, Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits, J. Therm. Spray Technol., 2002, 11(3), p 365-37410.1361/105996302770348754 ↗
2. R. Ghafouri-Azar, J. Mostaghimi, and S. Chandra, Modeling Development of Residual Stresses in Thermal Spray Coatings, Comput. Mater. Sci., 2006, 35(1), p 13-2610.1016/j.commatsci.2005.02.007 ↗
3. I.O. Golosnoy, A. Cipitria, and T.W. Clyne, Heat Transfer Through Plasma-Sprayed Thermal Barrier Coatings in Gas Turbines: a Review of Recent Work, J. Therm. Spray Technol., 2009, 18(5-6), p 809-82110.1007/s11666-009-9337-y ↗
4. A. Kulkarni, Z. Wang, T. Nakamura, S. Sampath, A. Goland, H. Herman, J. Allen, J. Ilavsky, G. Long, J. Frahm, and R.W. Steinbrech, Comprehensive Microstructural Characterization and Predictive Property Modeling of Plasma-Sprayed Zirconia Coatings, Acta Mater., 2003, 51(9), p 2457-247510.1016/S1359-6454(03)00030-2 ↗
5. T. Inamuro, T. Ogata, S. Tajima, and N. Konishi, A Lattice Boltzmann Method for Incompressible Two-Phase Flows with Large Density Differences, J. Comput. Phys., 2004, 198(2), p 628-64410.1016/j.jcp.2004.01.019 ↗
6. P. Yuan and L. Schaefer, A Thermal Lattice Boltzmann Two-Phase Flow Model and Its Application to Heat Transfer Problems—Part 2. Integration and Validation, J. Fluids Eng., 2006, 128(1), p 15110.1115/1.2137344 ↗
7. P. Fauchais, M. Fukumoto, A. Vardelle, and M. Vardelle, Knowledge Concerning Splat Formation: An Invited Review, J. Therm. Spray Technol., 2004, 13(3), p 337-36010.1361/10599630419670 ↗
8. S. Chandra and P. Fauchais, Formation of Solid Splats During Thermal Spray Deposition, J. Therm. Spray Technol., 2009, 18(2), p 148-18010.1007/s11666-009-9294-5 ↗
9. K. Yang, M. Liu, K. Zhou, and C. Deng, Recent Developments in the Research of Splat Formation Process in Thermal Spraying, J. Mater., 2013, 2013(2), p 1-1410.1155/2013/260758 ↗
10. O.P. Solonenko, V.V. Kudinov, A.V. Smirnov, A.N. Cherepanov, V.N. Popov, A.A. Mikhalchenko, and E.V. Kartaev, Micro-metallurgy of Splats: Theory, Computer Simulation and Experiment, JSME Int. J. B, 2005, 48(3), p 366-38010.1299/jsmeb.48.366 ↗
11. Y. Tan, J.P. Longtin, and S. Sampath, Modeling Thermal Conductivity of Thermal Spray Coatings: Comparing Predictions to Experiments, J. Therm. Spray Technol., 2006, 15(4), p 545-55210.1361/105996306X147216 ↗
12. F. Azarmi, T. Coyle, and J. Mostaghimi, Young’s Modulus Measurement and Study of the Relationship Between Mechanical Properties and Microstructure of Air Plasma Sprayed Alloy 625, Surf. Coat. Technol., 2009, 203(8), p 1045-105410.1016/j.surfcoat.2008.09.035 ↗
13. B. Klusemann, R. Denzer, and B. Svendsen, Microstructure-Based Modeling of Residual Stresses in Wc-12Co-Sprayed Coatings, J. Therm. Spray Technol., 2012, 21(1), p 96-10710.1007/s11666-011-9690-5 ↗
14. T. Wiederkehr, B. Klusemann, D. Gies, H. Müller, and B. Svendsen, An Image Morphing Method for 3D Reconstruction and Fe-Analysis of Pore Networks in Thermal Spray Coatings, Comput. Mater. Sci., 2010, 47(4), p 881-88910.1016/j.commatsci.2009.11.019 ↗
15. N. Chawla, V.V. Ganesh, and B. Wunsch, Three-Dimensional (3D) Microstructure Visualization and Finite Element Modeling of the Mechanical Behavior of Sic Particle Reinforced Aluminum Composites, Scripta Mater., 2004, 51(2), p 161-16510.1016/j.scriptamat.2004.03.043 ↗
16. K. Bobzin, N. Kopp, T. Warda, and M. Öte, Determination of the Effective Properties of Thermal Spray Coatings Using 2D and 3D Models, J. Therm. Spray Technol., 2012, 21(6), p 1269-127710.1007/s11666-012-9809-3 ↗
17. W.E. Lorensen and H.E. Cline, Marching Cubes: a High Resolution 3D Surface Construction Algorithm, SIGGRAPH Comput. Graph., 1987, 21(4), p 163-16910.1145/37402.37422 ↗
18. T. Lewiner, H. Lopes, and A.W. Vieira, Efficient Implementation of Marching Cubes’ Cases with Topological Guarantees, J. Graph. Tools, 2003, 8(2), p 1-1510.1080/10867651.2003.10487582 ↗
19. K. Holmberg, A. Laukkanen, A. Ghabchi, M. Rombouts, E. Turunen, R. Waudby, T. Suhonen, K. Valtonen, and E. Sarlin, Computational Modelling Based Wear Resistance Analysis of Thick Composite Coatings, Tribol. Int., 2013, 72, p 13-3010.1016/j.triboint.2013.12.001 ↗
20. J.-H. Qiao, R. Bolot, H. Liao, P. Bertrand, and C. Coddet, A 3D Finite-Difference Model for the Effective Thermal Conductivity of Thermal Barrier Coatings Produced by Plasma Spraying, Int. J. Therm. Sci., 2013, 65, p 120-12610.1016/j.ijthermalsci.2012.09.008 ↗
21. Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura, and H. Herman, Effects of Pores and Interfaces on Effective Properties of Plasma Sprayed Zirconia Coatings, Acta Mater., 2003, 51(18), p 5319-533410.1016/S1359-6454(03)00390-2 ↗
22. H. Singh, “Computer Simulations of Realistic Microstructures: Implications for Simulation-Based Materials Design,” Dissertation, Georgia Institute of Technology, 2007
23. S. Cirolini, J.H. Harding, and G. Jacucci, Computer Simulation of Plasma-Sprayed Coatings I. Coating Deposition Model, Surf. Coat. Technol., 1991, 48(2), p 137-14510.1016/0257-8972(91)90137-L ↗
24. R. Ghafouri-Azar, J. Mostaghimi, S. Chandra, and M. Charmchi, A Stochastic Model to Simulate the Formation of a Thermal Spray Coating, J. Therm. Spray Technol., 2003, 12(1), p 53-6910.1361/105996303770348500 ↗
25. J. Mostaghimi, S. Chandra, R. Ghafouri-Azar, and A. Dolatabadi, Modeling Thermal Spray Coating Processes: A Powerful Tool in Design and Optimization, Surf. Coat. Technol., 2003, 163-164, p 1-1110.1016/S0257-8972(02)00686-2 ↗
26. S. Beauvais, V. Guipont, M. Jeandin, D. Jeulin, A. Robisson, and R. Saenger, Study of the Porosity in Plasma-Sprayed Alumina Through an Innovative Three-Dimensional Simulation of the Coating Buildup, Metall. Mater. Trans. A, 2008, 39(11), p 2711-272410.1007/s11661-008-9612-4 ↗
27. O.P. Solonenko, V.A. Blednov, and V.I. Iordan, Computer Design of Thermal Sprayed Metal Powder Coatings, Thermophys. Aeromech., 2011, 18(2), p 255-27210.1134/S0869864311020065 ↗
28. T. Opfermann, “Simulation der Kollision und Erstarrung von Tropfen auf Oberflächen mittels der Lattice-Boltzmann-Methode und CUDA,” Diplomarbeit, TU Dortmund, German, 2010
29. P. Yuan and L. Schaefer, A Thermal Lattice Boltzmann Two-Phase Flow Model and Its Application to Heat Transfer Problems—Part 1. Theoretical Foundation, J. Fluids Eng., 2006, 128(1), p 14210.1115/1.2137343 ↗
30. J. Bao and L. Schaefer, Lattice Boltzmann Equation Model for Multi-Component Multi-phase Flow with High Density Ratios, Appl. Math. Model., 2013, 37(4), p 1860-187110.1016/j.apm.2012.04.048 ↗
31. X. Shan and H. Chen, Lattice Boltzmann Model for Simulating Flows with Multiple Phases and Components, Phys. Rev. E, 1993, 47(3), p 1815-181910.1103/PhysRevE.47.1815 ↗
32. X. Shan and H. Chen, Simulation of Nonideal Gases and Liquid-Gas Phase Transitions by the Lattice Boltzmann Equation, Phys. Rev. E, 1994, 49(4), p 2941-294810.1103/PhysRevE.49.2941 ↗
33. P. Bhatnagar, E. Gross, and M. Krook, A Model for Collision Processes in Gases. I. Small Amplitude Processes in Charged and Neutral One-Component Systems, Phys. Rev., 1954, 94(3), p 511-52510.1103/PhysRev.94.511 ↗
34. E.A. Semma, M. El Ganaoui, and R. Bennacer, Lattice Boltzmann Method for Melting/Solidification Problems, C. R. Mec., 2007, 335(5-6), p 295-30310.1016/j.crme.2007.05.015 ↗
35. M. Pasandideh-Fard, V. Pershin, S. Chandra, and J. Mostaghimi, Splat Shapes in a Thermal Spray Coating Process: Simulations and Experiments, J. Therm. Spray Technol., 2002, 11(2), p 206-21710.1361/105996302770348862 ↗
36. N. Wilt, The Cuda Handbook: A Comprehensive Guide to GPU Programming, 1st ed., Addison-Wesley, Upper Saddle River, 2013
37. Y. Na, S. Bingxia, X. Jia, and Z. Quanming, Orientation Codes-Based Template Matching Method on Workpiece Detection, 2nd International Conference on Power Electronics and Intelligent Transportation System (Peits) (Shenzhen, China), 2009, p 70-73.10.1109/PEITS.2009.5406896 ↗
38. A. Kout, T. Wiederkehr, and H. Müller, Efficient Stochastic Simulation of Thermal Spray Processes, Surf. Coat. Technol., 2009, 203(12), p 1580-159510.1016/j.surfcoat.2008.11.035 ↗