Effect of Gun Current on Electrical Properties of Atmospheric Plasma-Sprayed Lanthanum Silicate Coatings
Source abstract
Abstract
Apatite-type lanthanum silicate (ATLS) electrolyte coatings for use in intermediate-temperature solid oxide fuel cells were deposited by atmospheric plasma spraying (APS). Plasma-sprayed coatings with typical composition La10(SiO4)6O3 exhibiting good densification and high oxide ionic conductivity were obtained by properly adjusting the spraying parameters, particularly the gun current. The highest obtained ionic conductivity value of 3.3 mS/cm at 1,173 K in air is comparable to other ATLS conductors. This work demonstrated empirically that utilization of the APS technique is feasible to synthesize dense La10(SiO4)6O3 electrolyte coatings using gun currents within an unusually broad range.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. G.Y. Adachi, N. Imanaka, and S. Tamura, Ionic Conducting Lanthanide Oxides, Chem. Rev., 2002, 102(6), p 2405-242910.1021/cr0103064 ↗
2. P.J. Panteix, I. Julien, P. Abelard, and D. Bernache-Assollant, Influence of Cationic Vacancies on the Ionic Conductivity of Oxyapatites, J. Eur. Ceram. Soc., 2008, 28(4), p 821-82810.1016/j.jeurceramsoc.2007.07.019 ↗
3. J.R. Tolchard, M.S. Islam, and P.R. Slater, Defect Chemistry and Oxygen Ion Migration in the Apatite-Type Materials La9.33Si6O26 and La8Sr2Si6O26, J. Mater. Chem., 2003, 13(8), p 1956-196110.1039/b302748c ↗
4. S. Nakayama and M. Highchi, Electrical Properties of Apatite-Type Oxide Ionic Conductors RE9.33(SiO4)(6)O-2 (RE = Pr, Nd and Sm) Single Crystals, J. Mater. Sci. Lett., 2001, 20(10), p 913-91510.1023/A:1010928800227 ↗
5. S. Chefi, A. Madani, H. Boussetta, C. Roux, and A. Hammou, Electrical Properties of Al-Doped Oxyapatites at Intermediate Temperature, J. Power Sources, 2008, 177(2), p 464-46910.1016/j.jpowsour.2007.11.091 ↗
6. J.R. Tolchard, P.R. Slater, and M.S. Islam, Insight into Doping Effects in Apatite Silicate Ionic Conductors, Adv. Funct. Mater., 2007, 17(14), p 2564-257110.1002/adfm.200600789 ↗
7. H. Yoshioka, Oxide Ionic Conductivity of Apatite-Type Lanthanum Silicates, J. Alloys Compd., 2006, 408-412, p 649-65210.1016/j.jallcom.2004.12.180 ↗
8. A.L. Shaula, V.V. Kharton, and F.M.B. Marques, Ionic and Electronic Conductivities, Stability and Thermal Expansion of La10-x(Si, Al)(6)O-26+/−Delta Solid Electrolytes, Solid State Ionics, 2006, 177(19-25), p 1725-172810.1016/j.ssi.2005.11.023 ↗
9. J.E.H. Sansom, J.R. Tolchard, M.S. Islam, D. Apperley, and P.R. Slater, Solid State Si-29 NMR Studies of Apatite-Type Oxide Ion Conductors, J. Mater. Chem., 2006, 16(15), p 1410-141310.1039/b600122j ↗
10. J.E.H. Sansom, E. Kendrick, J.R. Tolchard, M.S. Islam, and P.R. Slater, A Comparison of the Effect of Rare Earth vs Si Site Doping on the Conductivities of Apatite-Type Rare Earth Silicates, J. Solid State Electrochem., 2006, 10(8), p 562-56810.1007/s10008-006-0129-8 ↗
11. E. Rodriguez-Reyna, A.F. Fuentes, M. Maczka, J. Hanuza, K. Boulahya, and U. Amador, Facile Synthesis, Characterization and electrical Properties of Apatite-Type Lanthanum Germanates, Solid State Sci., 2006, 8(2), p 168-17710.1016/j.solidstatesciences.2005.11.004 ↗
12. A.V. Kovalevsky, F.M.B. Marques, V.V. Kharton, F. Maxim, and J.R. Frade, Silica-Scavenging Effect in Zirconia Electrolytes: Assessment of Lanthanum Silicate Formation, Ionics, 2006, 12(3), p 179-18410.1007/s11581-006-0031-5 ↗
13. S. Celerier, C. Laberty-Robert, J.W. Long, K.A. Pettigrew, R.M. Stroud, D.R. Rolison, F. Ansart, and P. Stevens, Synthesis of La9.33Si6O26 Pore-Solid Nanoarchiltectures Via Epoxide-Driven Sol-Gel Chemistry, Adv. Mater., 2006, 18(5), p 61510.1002/adma.200501938 ↗
14. S. Celerier, C. Laberty, F. Ansart, P. Lenormand, and P. Stevens, New Chemical Route Based on Sol-Gel Process for the Synthesis of Oxyapatite La9.33Si6O26, Ceram. Int., 2006, 32(3), p 271-27610.1016/j.ceramint.2005.03.001 ↗
15. L. Leon-Reina, E.R. Losilla, M. Martinez-Lara, M.C. Martin-Sedeno, S. Bruque, P. Nunez, D.V. Sheptyakov, and M.A.G. Aranda, High Oxide Ion Conductivity in Al-Doped Germanium Oxyapatite, Chem. Mater., 2005, 17(3), p 596-60010.1021/cm048361r ↗
16. S. Nakayama, M. Sakamoto, M. Higuchi, K. Kodaira, M. Sato, S. Kakita, T. Suzuki, and K. Itoh, Oxide Ionic Conductivity of Apatite Type Nd-9.33(SiO4)(6)O-2 Single Crystal, J. Eur. Ceram. Soc., 1999, 19(4), p 507-51010.1016/S0955-2219(98)00215-5 ↗
17. Y.V. Pivak, V.V. Kharton, E.N. Naumovich, J.R. Frade, and F.M.B. Marques, Ionic and Electronic Transport in La2Ti2SiO9-Based Materials, J. Solid State Chem., 2007, 180(4), p 1259-127110.1016/j.jssc.2007.01.024 ↗
18. Y.V. Pivak, V.V. Kharton, A.A. Yaremchenko, S.O. Yakovlev, A.V. Kovalevsky, J.R. Frade, and F.M.B. Marques, Phase Relationships and Transport in Ti-Ce- and Zr-Substituted Lanthanum Silicate Systems, J. Eur. Ceram. Soc., 2007, 27(6), p 2445-245410.1016/j.jeurceramsoc.2006.09.004 ↗
19. M.S. Wickleder, Inorganic Lanthanide Compounds with Complex Anions, Chem. Rev., 2002, 102(6), p 2011-208710.1021/cr010308o ↗
20. L. Zhang, H.Q. He, H.W. Wu, C.Z. Li, and S.P. Jiang, Synthesis and Characterization of Doped La(9)ASi(6)O(26.5) (A = Ca, Sr, Ba) Oxyapatite Electrolyte by a Water-Based Gel-Casting Route, Int. J. Hydrog. Energy, 2011, 36(11), p 6862-687410.1016/j.ijhydene.2011.02.123 ↗
21. P.J. Panteix, I. Julien, D. Bernache-Assollant, and P. Abeelard, Synthesis and Characterisation of Oxide Ions Conductors with the Apatite Structure for Intermediate Temperature SOFC, Euro Ceramics Viii, Pts 1-3, 2004, 264-268, p 1177-118010.4028/www.scientific.net/KEM.264-268.1177 ↗
22. P.J. Panteix, I. Julien, D. Bernache-Assollant, and P. Abelard, Synthesis and Characterization of Oxide Ions Conductors with the Apatite Structure for Intermediate Temperature SOFC, Mater. Chem. Phys., 2006, 95(2-3), p 313-32010.1016/j.matchemphys.2005.06.040 ↗
23. A. Vincent, S.B. Savignat, and F. Gervais, Elaboration and Ionic Conduction of Apatite-Type Lanthanum Silicates Doped with Ba, La10-xBax(SiO4)(6)O3-x/2 with x = 0.25-2, J. Eur. Ceram. Soc., 2007, 27(2-3), p 1187-119210.1016/j.jeurceramsoc.2006.05.090 ↗
24. E. Kendrick, J.E.H. Sansom, J.R. Tolchard, M.S. Islam, and P.R. Slater, Neutron Diffraction and Atomistic Simulation Studies of Mg Doped Apatite-Type Oxide Ion Conductors, Faraday Discuss., 2007, 134, p 181-19410.1039/B602258H ↗
25. J.C. Oliveira, D. Horwat, A. Billard, and A. Cavaleiro, Oxidation of Magnetron Sputtered La-Si Thin Films for Solide Oxide Fuel Cell Electronlytes, Thin Solid Films, 2009, 517(6), p 1895-189810.1016/j.tsf.2008.09.100 ↗
26. W. Gao, H.L. Liao, and C. Coddet, Effect of Feedstock Powder Characteristics on Microstructure and Mechanical Properties of Lanthanum Silicate Coatings Deposited by Atmospheric Plasma Spraying, Appl. Surf. Sci., 2008, 254(17), p 5548-555110.1016/j.apsusc.2008.02.113 ↗
27. W. Gao, W.Y. Li, H.L. Liao, and C. Coddet, Electrical Properties of Atmospheric Plasma-Sprayed La-10(SiO4)(6)O-3 Electrolyte Coatings, J. Therm. Spray Technol., 2011, 20(4), p 888-89110.1007/s11666-011-9625-1 ↗
28. W. Gao, H.L. Liao, and C. Coddet, The Influence of Sintering Time of Feedstock Powders on the Electrical Properties of La-10(SiO4)(6)O-3 Electrolyte Coatings, Solid Oxide Fuel Cells 12, S.C. Singhal and K. Eguchi, Ed., Electrochemical Society, Pennington, 2011, p 1225-1233
29. W. Gao, H.L. Liao, and C. Coddet, Plasma Spray Synthesis of La(10)(SiO(4))(6)O(3) as a New Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells, J. Power Sources, 2008, 179(2), p 739-74410.1016/j.jpowsour.2008.01.023 ↗
30. H. Yoshioka, T. Mitsui, A. Mineshige, and T. Yazawa, Fabrication of Anode Supported SOFC Using Plasma-Sprayed Films of the Apatite-Type Lanthanum Silicate as an Electrolyte, Solid State Ionics, 2010, 181(37-38), p 1707-171210.1016/j.ssi.2010.09.030 ↗
31. S. Dru, E. Meillot, K. Wittmann-Teneze, R. Benoit, and M.L. Saboungi, Plasma Spraying of Lanthanum Silicate Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFCs), Surf. Coat. Technol., 2010, 205(4), p 1060-106410.1016/j.surfcoat.2010.05.034 ↗
32. H. Yoshioka, Y. Nojiri, and S. Tanase, Ionic Conductivity and Fuel Cell Properties of Apatite-Type Lanthanum Silicates Doped with Mg and Containing Excess Oxide Ions, Solid State Ionics, 2008, 179(38), p 2165-216910.1016/j.ssi.2008.07.022 ↗
33. D. Marrero-Lopez, M.C. Martin-Sedeno, J. Pena-Martinez, J.C. Ruiz-Morales, P. Nunez, M.A.G. Aranda, and J.R. Ramos-Barrado, Evaluation of Apatite Silicates as Solid Oxide Fuel Cell Electrolytes, J. Power Sources, 2010, 195(9), p 2496-250610.1016/j.jpowsour.2009.11.068 ↗
34. R. Hui, Z. Wang, O. Kesler, L. Rose, J. Jankovic, S. Yick, R. Maric, and D. Ghosh, Thermal Plasma Spraying for SOFCs: Applications, Potential Advantages, and Challenges, J. Power Sources, 2007, 170(2), p 308-32310.1016/j.jpowsour.2007.03.075 ↗
35. R. Vassen, D. Hathiramani, J. Mertens, V.A.C. Haanappel, and I.C. Vinke, Manufacturing of High Performance Solid Oxide Fuel Cells (SOFCs) with Atmospheric Plasma Spraying (APS), Surf. Coat. Technol., 2007, 202(3), p 499-50810.1016/j.surfcoat.2007.06.064 ↗
36. F. Sun, N.N. Zhang, H.L. Liao, and J.L. Li, Effect of Heat Treatment Temperature on Performance of Plasma-Sprayed Apatite-Lanthanum Silicate Coatings as Electrolytes for IT-SOFC, J. Therm. Spray Technol., 2012, 21(6), p 1257-126210.1007/s11666-012-9822-6 ↗
37. H. Yoshioka, Fabrication and Ionic Conductivity of Apatite-Type Mg Doped Lanthanum Silicate Films by DC Plasma Spraying, J. Ceram. Soc. Jpn., 2009, 117(1), p 99-10110.2109/jcersj2.117.99 ↗