journal article·2018-12

Size Determination of the Grains in a Plasma-Sprayed Cast Iron Splat Based on the Heat Transfer Between the Splat and the Substrate

Ya-Zhe Xing, Li He, Zhang Liu, Xiao Feng, Yongnan Chen, Yiku Xu

Publisher page

Abstract

The size of the grains formed in individual splats has a significant effect on the properties of a thermally sprayed coating. In this work, the grain size in a plasma-sprayed cast iron splat was predicted based on a known relationship between the grain size and the thermal contact resistance at the splat–substrate interface. A numerical calculation method, based on a 2D heat transfer model, was used to study the relationship between the thermal contact resistance and the melting depth on the substrate surface. The thermal contact resistance was evaluated according to the observed maximum melting depth from the field emission scanning electron microscope micrographs of the individual splats. The estimated grain size with a range 51.3-73.6 nm was in close agreement with the experimental observations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal Alloys Wear and Properties · Coal Combustion and Slurry Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Xiaotao Luo, Gregory M. Smith, and Sanjay Sampath, On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates-Part I: High Velocity Thermal Spray Coatings, J. Therm. Spray Technol., 2018, 27, p 296-30710.1007/s11666-018-0695-1 ↗
2. P. Fauchais, M. Vardelle, and S. Goutier, Latest Researches Advances of Plasma Spraying: From Splat to Coating Formation, J. Therm. Spray Technol., 2016, 25, p 1534-155310.1007/s11666-016-0435-3 ↗
3. R.K. Shukla, V. Patel, and A. Kumar, Modeling of Rapid Solidification with Undercooling Effect During Droplet Flattening on a Substrate in Coating Formation, J. Therm. Spray Technol., 2018, 27, p 269-28710.1007/s11666-017-0666-y ↗
4. M. Vardelle, A. Vardelle, A.C. Leger, P. Fauchais, and D. Gobin, Influence of Particle Parameters at Impact on Splat Formation and Solidification in Plasma Spraying Process, J. Therm. Spray Technol., 1994, 4, p 50-5810.1007/BF02648528 ↗
5. Y. Wang, Y. Bai, T. Yuan, H.Y. Chen, Y.X. Kang, W.J. Shi, X.L. Song, and B.Q. Li, Failure Analysis of Fine-Lamellar Structured YSZ Based Thermal Barrier Coatings with Submicro/nano-grains, Surf. Coat. Technol., 2017, 319, p 95-10310.1016/j.surfcoat.2017.03.055 ↗
6. X.C. Liu, H.W. Zhang, and K. Lu, Strain-Induced Ultrahard and Ultrastable Nanolaminated Structure in Nickel, Science, 2013, 342, p 337-34010.1126/science.1242578 ↗
7. R. Ahmed, N.H. Faisal, N.M. Al-Anazi, S. Al-Mutairi, F.-L. Toma, L.-M. Berger, A. Potthoff, E.K. Polychroniadis, M. Sall, D. Chaliampalias, and M.F.A. Goosen, Structure Property Relationship of Suspension Thermally Sprayed WC-Co Nanocomposite Coatings, J. Therm. Spray Technol., 2015, 24, p 357-37710.1007/s11666-014-0174-2 ↗
8. B. Saeedi, A. Sabour Rouh Aghdam, and G. Gholami, A Study on Nanostructured In-Situ Oxide Dispersed NiAl Coating and Its High Temperature Oxidation Behaviour, Surf. Coat. Technol., 2015, 276, p 704-71310.1016/j.surfcoat.2015.05.042 ↗
9. Er-Juan Yang, Xiao-Tao Luo, Guan-Jun Yang, Cheng-Xin Li, and Chang-Jiu Li, A TEM Study of the Microstructure of Plasma-Sprayed YSZ Near Inter-splat Interfaces, J. Therm. Spray Technol., 2015, 24, p 907-91410.1007/s11666-015-0260-0 ↗
10. J.-J. Tian, S.-W. Yao, X.-T. Luo, C.-X. Li, and C.-J. Li, An Effective Approach for Creating Metallurgical Self-Bonding in Plasma-Spraying of NiCr-Mo Coating by Designing Shell-Core-Structured Powders, Acta Mater., 2016, 110, p 19-3010.1016/j.actamat.2016.03.020 ↗
11. Ning Chen, Xuemei Song, Ziwei Liu, Chucheng Lin, Yi Zeng, Liping Huang, and Xuebing Zheng, Quantitative Analysis of the Relationship Between Microstructures and Thermal Conductivity for YSZ Coatings, J. Therm. Spray Technol., 2017, 26, p 745-75410.1007/s11666-017-0542-9 ↗
12. Y. Zhao and Y. Gao, Deposition of Nanostructured YSZ Coating from Spray-Dried Particles with No Heat Treatment, Appl. Surf. Sci., 2015, 346, p 406-41410.1016/j.apsusc.2015.03.164 ↗
13. A. Rauf, Q. Yu, L. Jin, and C. Zhou, Microstructure and Thermal Properties of Nanostructured Lanthana-Doped Yttria-Stabilized Zirconia Thermal Barrier Coatings by Air Plasma Spraying, Scr. Mater., 2012, 66, p 109-11210.1016/j.scriptamat.2011.10.017 ↗
14. Y. Lahmar-Mebdoua, A. Vardelle, P. Fauchais, and D. Gobin, Modelling the Nucleation Process in Alumina Lamellae Depositedon a Steel Substrate, Int. J. Therm. Sci., 2010, 49, p 522-52810.1016/j.ijthermalsci.2009.09.011 ↗
15. H. Liu, H.R. Salimi Jazi, M. Bussmann, and J. Mostaghimi, Experiments and Modeling of Rapid Solidification of Plasma-Sprayed Yttria-Stabilized Zirconia, Acta Mater., 2009, 57, p 6013-602110.1016/j.actamat.2009.08.023 ↗
16. S.-W. Yao, C.-J. Li, J.-J. Tian, G.-J. Yang, and C.-X. Li, Conditions and Mechanisms for the Bonding of a Molten Ceramic Droplet to a Substrate after High-Speed Impact, Acta Mater., 2016, 119, p 9-2510.1016/j.actamat.2016.07.057 ↗
17. Hadi Safaei, Mohsen Davazdah Emami, Hamidreza Salimi Jazi, and Javad Mostaghimi, Application of Compressible Volume of Fluid Model in Simulating the Impact and Solidification of Hollow Spherical ZrO2 Droplet on a Surface, J. Therm. Spray Technol., 2017, 26, p 1959-198110.1007/s11666-017-0632-8 ↗
18. C. Moreau, P. Cielo, M. Lamontagne, S. Dallaire, J.C. Krapez, and M. Vardelle, Temperature Evolution of Plasma-Sprayed Niobium Particles Impacting on a Substrate, Surf. Coat. Technol., 1991, 46, p 173-18710.1016/0257-8972(91)90160-X ↗
19. M. Bertagnolli, M. Marchese, and G. Jacucci, Modeling of Particles Impacting on a Rigid Substrate under Plasma Spraying Conditions, J. Therm. Spray Technol., 1995, 4, p 41-4910.1007/BF02648527 ↗
20. C.-J. Li and W.-Z. Wang, Quantitative Characterization of Lamellar Microstructure of Plasma-Sprayed Ceramic Coatings through Visualization of Void Distribution, Mater. Sci. Eng. A, 2004, 386, p 10-1910.1016/S0921-5093(04)00900-1 ↗
21. A. Sharma, R.J. Gambino, and S. Sampath, Anisotropic Electrical Properties in Thermal Spray Metallic Coatings, Acta Mater., 2006, 54, p 59-65
22. H. Fukanuma, R. Huang, Y. Tanaka, and Y. Uesugi, Mathematical Modeling and Numerical Simulation of Splat Cooling in Plasma Spray Coatings, J. Therm. Spray Technol., 2009, 18, p 965-97410.1007/s11666-009-9366-6 ↗
23. Z. Lei, H.T. Kang, and Y. Liu, Finite Element Analysis for Transient Thermal Characteristics of Resistance Spot Welding Process with Three Sheets Assemblies, Procedia Engineering, 2011, 16, p 622-63110.1016/j.proeng.2011.08.1133 ↗
24. L. Chen, P.L. Wang, P.N. Song, and J.Y. Zhang, Finite Element Numerical Simulation of Temperature Field in Metal Pattern Casting System and “Reverse Method” of Defining the Thermal Physical Coefficient, Acta Metall. Sin. Engl. Lett., 2007, 20, p 217-22410.1016/S1006-7191(07)60029-5 ↗
25. H.T. Lee, C.T. Chen, and J.L. Wu, Numerical and Experimental Investigation into Effect of Temperature Field on Sensitization of Alloy 690 Butt Welds Fabricated by Gas Tungsten Arc Welding and Laser Beam Welding, J. Mater. Process. Technol., 2010, 210, p 1636-164510.1016/j.jmatprotec.2010.05.012 ↗
26. D.A. Akinlade, W.F. Caley, N.L. Richards, and M.C. Chaturvedi, Microstructural and Thermal Processing Effects on Adding 1 and 3 w/o Ti to a Powder Metallurgy Processed Quaternary Ni-Cr-Fe-Al Alloy, Mater. Sci. Eng. A, 2011, 528, p 996-100210.1016/j.msea.2010.10.044 ↗
27. L. Li, X.Y. Wang, G. Wei, A. Vaidya, H. Zhang, and S. Sampath, Substrate Melting During Thermal Spray Splat Quenching, Thin Solid Films, 2004, 468, p 113-11910.1016/j.tsf.2004.05.073 ↗
28. P.G. Boswell and G.A. Chadwick, The Grain Size of Splat-Quenched Alloys, Scr. Metall., 1977, 11, p 459-46510.1016/0036-9748(77)90157-0 ↗
29. S. Sampath and H. Herman, Rapid Solidification and Microstructure Development during Plasma Spray Deposition, J. Therm. Spray Technol., 1996, 5, p 445-45610.1007/BF02645275 ↗