journal article·2020-06

Investigation of the Bonding Formation of a Plasma-Sprayed Cast Iron Splat on a Preheated Aluminum Substrate Using an Experimentally Based Numerical Simulation Method

Ya-Zhe Xing, Ke Wang, Li He, Zhang Liu, Yong-Nan Chen

Publisher page

Abstract

In this study, the bonding formation of the cast iron splat deposited on a preheated aluminum substrate by atmospheric plasma spraying was investigated using a finite element method based on a heat transfer model built in a cylindrical coordinate system. To enhance the accuracy of calculations, thermal contact resistance (Rth) of the contact interface was incorporated into the calculation. A precise Rth value was obtained using a well-established relationship. The diameter of grains in the splat was determined by atomic force microscopy analysis. Furthermore, the physical parameters of the cast iron and the aluminum at different temperatures used in the simulation were calculated according to the composition of the materials. The calculations indicated that the interface temperature was below the substrate melting point during the entire observation period, confirming that no melting of the aluminum substrate had occurred. Thus, the formation of splat–substrate metallurgical bonding was attributed to the enhanced interface temperature and plastic deformation rather than the melting of the substrate surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal Alloys Wear and Properties · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. L. Li, X.Y. Wang, G. Wei, A. Vaidya, H. Zhang, and S. Sampath, Substrate Melting During Thermal Spray Splat Quenching, Thin Solid Films, 2004, 468, p 113-11910.1016/j.tsf.2004.05.073 ↗
2. R.G. Castro, A.H. Bartlett, K.J. Hollis, and R.D. Fields, The Effect of Substrate Temperature on the thermal diffusivity and Bonding Characteristics of Plasma Sprayed Beryllium, Fusion Eng. Des., 1997, 37, p 243-25210.1016/S0920-3796(97)00049-5 ↗
3. J.-J. Tian, S.-W. Yao, X.-T. Luo, C.-X. Li, and C.-J. Li, An Effective Approach for Creating Metallurgical Self-bonding in Plasma-Spraying of NiCr-Mo Coating by Designing Shell–Core–Structured Powders, Acta Mater., 2016, 110, p 19-3010.1016/j.actamat.2016.03.020 ↗
4. S. Kitahara and A. Hasui, Study of the Bonding Mechanism of Sprayed Coatings, J. Vac. Sci. Technol., 1974, 11, p 747-75310.1116/1.1312746 ↗
5. S. Brossard, P.R. Munroe, A.T. Tran, and M.M. Hyland, Study of the Splat Microstructure and the Effects of Substrate Heating on the Splat Formation for Ni-Cr Particles Plasma Sprayed onto Stainless Steel Substrates, J. Therm. Spray Technol., 2010, 19, p 1100-111410.1007/s11666-010-9513-0 ↗
6. Y. Xing, C. Jiang, J. Hao, and R. Sun, Numerical Analysis on Substrate Melting During Plasma-Spraying Cast Iron on Aluminum Surface, Rev. Adv. Mater. Sci., 2013, 33, p 276-280
7. Y.-Z. Xing, Z. Liu, G. Wang, X.-H. Li, C.-P. Jiang, Y.-N. Chen, Y. Zhang, X.-D. Song, and M. Dargusch, Improvement of Interfacial Bonding Between Plasma-Sprayed Cast Iron Splat and Aluminum Substrate Through Preheating Substrate, Surf. Coat. Technol., 2017, 316, p 190-19810.1016/j.surfcoat.2017.03.032 ↗
8. C.-J. Li, C.-X. Li, and G.-J. Yang, Examination of Substrate Surface Melting-Induced Splashing During Splat Formation in Plasma Spraying, J. Therm. Spray Technol., 2006, 15, p 717-72410.1361/105996306X146947 ↗
9. Y. Heichal and S. Chandra, Predicting Thermal Contact Resistance Between Molten Metal Droplets and a Solid Surface, J. Heat Transf., 2005, 127, p 1269-127510.1115/1.2039114 ↗
10. A. McDonald, C. Moreau, and S. Chandra, Thermal Contact Resistance Between Plasma-Sprayed Particles and Flat Surfaces, Int. J. Heat Mass Transf., 2007, 50, p 1737-174910.1016/j.ijheatmasstransfer.2006.10.022 ↗
11. G.X. Wang, R. Goswami, S. Sampath, and V. Prasad, Understanding the Heat Transfer and Solidification of Plasma-Sprayed Yttria-Partially Stabilized Zirconia Coatings, Mater. Manuf. Process., 2004, 19, p 259-27210.1081/AMP-120029855 ↗
12. Y. Lahmar-Mebdoua, A. Vardelle, P. Fauchais, and D. Gobin, Modelling the Nucleation Process in Alumina Lamellae Deposited on a Steel Substrate, Int. J. Therm. Sci., 2010, 49, p 522-52810.1016/j.ijthermalsci.2009.09.011 ↗
13. C. Moreau, P. Cielo, M. Lamontagne, S. Dallaire, J.C. Krapez, and M. Vardelle, Temperature Evolution of Plasma-Sprayed Niobium Particles Impacting on a Substrate, Surf. Coat. Technol., 1991, 46, p 173-18710.1016/0257-8972(91)90160-X ↗
14. M. Bertagnolli, M. Marchese, and G. Jacucci, Modeling of Particles Impacting on a Rigid Substrate Under Plasma Spraying Conditions, J. Therm. Spray Technol., 1995, 4, p 41-4910.1007/BF02648527 ↗
15. C.-J. Li and W.-Z. Wang, Quantitative Characterization of Lamellar Microstructure of Plasma-Sprayed Ceramic Coatings Through Visualization of Void Distribution, Mater. Sci. Eng. A, 2004, 386, p 10-1910.1016/S0921-5093(04)00900-1 ↗
16. A. Sharma, R.J. Gambino, and S. Sampath, Anisotropic Electrical Properties in Thermal Spray Metallic Coatings, Acta Mater., 2006, 54, p 59-65
17. H. Fukanuma, R. Huang, Y. Tanaka, and Y. Uesugi, Mathematical Modeling and Numerical Simulation of Splat Cooling in Plasma Spray Coatings, J. Therm. Spray Technol., 2009, 18, p 965-97410.1007/s11666-009-9366-6 ↗
18. A.A. Nechiporenko and E.P. Martsevoi, Plasma-Arc Spray-Coating of Powders of Self-Fluxing Iron-Base Alloys 1. Estimation of the Temperature and Velocity of Powder Particles in the Plasma Flow, Powder Metall. Met. Ceram., 1995, 34, p 1-210.1007/BF00559849 ↗
19. Q. Yang, R. Li, Z.Q. Liu, M.J. Shi, X.K. Luo, and T. Zhang, Compositional Dependence of Microstructure and Tribological Properties of Plasma Sprayed Fe-Based Metallic Glass Coatings, Sci. China Technol. Sci., 2012, 55, p 1335-134210.1007/s11431-012-4821-x ↗
20. M. Xue, Y. Heichal, S. Chandra, and J. Mostaghimi, Modeling the Impact of a Molten Metal Droplet on a Solid Surface Using Variable Interfacial Thermal Contact Resistance, J. Mater. Sci., 2007, 42, p 9-1810.1007/s10853-006-1129-x ↗
21. Y.-Z. Xing, L. He, Z. Liu, X. Feng, Y. Chen, and Y. Xu, Size Determination of the Grains in a Plasma-Sprayed Cast Iron Splat Based on the Heat Transfer Between the Splat and the Substrate, J. Therm. Spray Technol., 2018, 27, p 1518-152310.1007/s11666-018-0789-9 ↗
22. L. Chen, P.L. Wang, P.N. Song, and J.Y. Zhang, Finite Element Numerical Simulation of Temperature Field in Metal Pattern Casting System and “Reverse Method” of Defining the Thermal Physical Coefficient, Acta Metall. Sin.-Engl. Lett., 2007, 20, p 217-22410.1016/S1006-7191(07)60029-5 ↗
23. S. Sampath and H. Herman, Rapid Solidification and Microstructure Development During Plasma Spray Deposition, J. Therm. Spray Technol., 1996, 5, p 445-45610.1007/BF02645275 ↗
24. P.G. Boswell and G.A. Chadwick, The Grain Size of Splat-Quenched Alloys, Scr. Metall., 1977, 11, p 459-46510.1016/0036-9748(77)90157-0 ↗
25. H.T. Lee, C.T. Chen, and J.L. Wu, Numerical and Experimental Investigation into Effect of Temperature Field on Sensitization of Alloy 690 Butt Welds Fabricated by Gas Tungsten Arc Welding and Laser Beam Welding, J. Mater. Process. Technol., 2010, 210, p 1636-164510.1016/j.jmatprotec.2010.05.012 ↗
26. D.A. Akinlade, W.F. Caley, N.L. Richards, and M.C. Chaturvedi, Microstructural and Thermal Processing Effects on Adding 1 and 3 w/o Ti to a Powder Metallurgy Processed Quaternary Ni-Cr-Fe-Al Alloy, Mater. Sci. Eng. A, 2011, 528, p 996-100210.1016/j.msea.2010.10.044 ↗
27. B. Saeedi, A.S.R. Aghdam, and G. Gholami, A Study on Nanostructured In Situ Oxide Dispersed NiAl Coating and Its High Temperature Oxidation Behaviour, Surf. Coat. Technol., 2015, 276, p 704-71310.1016/j.surfcoat.2015.05.042 ↗
28. E.-J. Yang, X.-T. Luo, G.-J. Yang, C.-X. Li, and C.-J. Li, A TEM Study of the Microstructure of Plasma-Sprayed YSZ Near Inter-Splat Interfaces, J. Therm. Spray Technol., 2015, 24, p 907-91410.1007/s11666-015-0260-0 ↗
29. N. Chen, X. Song, Z. Liu, C. Lin, Y. Zeng, L. Huang, and X. Zheng, Quantitative Analysis of the Relationship Between Microstructures and Thermal Conductivity for YSZ Coatings, J. Therm. Spray Technol., 2017, 26, p 745-75410.1007/s11666-017-0542-9 ↗
30. Y. Zhao and Y. Gao, Deposition of Nanostructured YSZ Coating from Spray-Dried Particles with No Heat Treatment, Appl. Surf. Sci., 2015, 346, p 406-41410.1016/j.apsusc.2015.03.164 ↗
31. M. Fukumoto, E. Nishioka, and T. Matsubara, Flattening and Solidification Behavior of a Metal Droplet on a Flat Substrate Surface Held at Various Temperatures, Surf. Coat. Technol., 1999, 120(121), p 131-13710.1016/S0257-8972(99)00349-7 ↗
32. X. Jiang, Y. Wan, H. Hermann, and S. Sampath, Role of Condensates and Adsorbates on Substrate Surface on Fragmentation of Impinging Molten Droplets During Thermal Spray, Thin Solid Films, 2001, 385, p 132-14110.1016/S0040-6090(01)00769-6 ↗
33. R. McPherson, The Relationship Between the Mechanism of Formation, Microstructure and Properties of Plasma-Sprayed Coatings, Thin Solid Films, 1981, 83, p 29710.1016/0040-6090(81)90633-7 ↗
34. P. Fauchais, M. Fukumoto, A. Vardelle, and M. Vardelle, Knowledge Concerning Splat Formation: An Invited Review, J. Therm. Spray Technol., 2004, 13, p 1-2410.1361/10599630419670 ↗
35. V. Pershin, M. Lufitha, S. Chandra, and J. Mostaghimi, Effect of Substrate Temperature on Adhesion Strength of Plasma-Sprayed Nickel Coatings, J. Therm. Spray Technol., 2003, 12, p 370-37610.1361/105996303770348249 ↗
36. M. Fukumoto, I. Ohgitani, M. Shiiba, and T. Yasui, Effect of Substrate Surface Change by Heating on Transition in Flattening Behavior of Thermal Sprayed Particles, Thermal Spray 2004: Advances in Technology and Application, E. Lugscheider and C. Berndt, Ed., ASM International, Materials Park, OH, 2004, p 1-6
37. G.X. Wang and E.F. Matthys, On the Heat Transfer at the Interface Between a Solidifying Metal and a Solid Substrate, Metal Spinning, Strip Casting and Slab Casting, E.F. Matthys and W.G. Truckner, Ed., Minerals, Metals and Materials Society, Warrendale, PA, 1996, p 205-226
38. L. Bianchi, A. Leger, M. Vardelle, A. Vardelle, and P. Fauchais, Splat Formation and Cooling of Plasma-Sprayed Zirconia, Thin Solid Films, 1997, 305, p 35-4710.1016/S0040-6090(97)80005-3 ↗
39. S.-W. Yao, C.-J. Li, J.-J. Tian, G.-J. Yang, and C.-X. Li, Conditions and Mechanisms for the Bonding of a Molten Ceramic Droplet to a Substrate After High-Speed Impact, Acta Mater., 2016, 119, p 9-2510.1016/j.actamat.2016.07.057 ↗
40. X.Y. Wang, Modeling of Rapid Solidification, Splat Morphology, and Melt Flow During Thermal Spraying, State University of New York, Stony Brook, 2002
41. Q.-F. Zhu, M.-H. Chen, C.-Y. Ban, Z.-H. Zhao, and J.-Z. Cui, Effect of Annealing Temperature on the Deformed Structure of High Purity Aluminum, Heat Treat. Met., 2011, 36, p 111-114 ((in Chinese))
42. W. Trompetter, M. Hyland, D. Mcgrouther, P. Munroe, and A. Markwitz, The Effect of Substrate Surface Oxides on the Bonding of NiCr Alloy Particles HVAF Thermally Sprayed Onto Aluminum Substrates, J. Therm. Spray Technol., 2010, 19, p 1024-103110.1007/s11666-010-9506-z ↗
43. I.V. Alexandrov and R.Z. Valiev, Nanostructures from Severe Plastic Deformation and Mechanisms of Large-Strain Work Hardening, Nanostruct. Mater., 1999, 12, p 709-71210.1016/S0965-9773(99)00223-8 ↗
44. N. Hansen, R.F. Mehl, and A. Medalist, New Discoveries in deformed metals, Metall. Mater. Trans. A, 2001, 32, p 2917-293510.1007/s11661-001-0167-x ↗
45. Y.T. Zhu, T.C. Lowe, and T.G. Langdon, Performance and Applications of Nanostructured Materials Produced by Severe Plastic Deformation, Scr. Mater., 2004, 51, p 825-83010.1016/j.scriptamat.2004.05.006 ↗
46. J.F. Gu, D.H. Bei, J.S. Pan, J. Lu, and K. Lu, Improved Nitrogen Transport in Surface Nanocrystallized Low-Carbon Steels During Gaseous Nitridation, Mater. Lett., 2002, 55, p 340-34310.1016/S0167-577X(02)00389-0 ↗
47. L. Shen, L. Wang, Y. Wang, and C. Wang, Plasma Nitriding of AISI, 304 Austenitic Stainless Steel with Pre-shot Peening, Surf. Coat. Technol., 2010, 204, p 3222-322710.1016/j.surfcoat.2010.03.018 ↗