Rapid Diamond Deposition on Ni and Co Coatings by Using Twin Acetylene/Oxygen Gas Welding Torches
Source abstract
Abstract
Cermet coatings have been widely used because of their high hardness and excellent wear resistance even under high-temperature conditions. However, since cermet coatings include expensive materials such as WC, TiC, TiN and so on, low-cost hard particles as a dispersing agent need to be developed. In this study, in order to develop a low-cost diamond dispersion system for the creation of diamond/thermal sprayed metal hybrid coatings, diamond deposition on thermal sprayed Ni and Co coatings and Mo and Ni metal substrates by the combustion flame method using twin acetylene/oxygen gas welding torches was carried out. Consequently, even in cases of thermal sprayed Ni and Co coatings, diamond particles could be deposited within only 5 min. From these results, this technique is proved to have a high potential for rapid diamond deposition in order to create diamond/thermal sprayed metal hybrid coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Tribology and Wear Analysis · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. S. Matsumoto, Y. Sato, M. Kamo, and N. Setaka, Vapour Deposition of Diamond Particles from Methane, Jpn. J. Appl. Phys., 1982, 21(4), p L183-L18510.1143/JJAP.21.L183 ↗
2. M. Murakawa, S. Takeuchi, and Y. Hirose, Diamond Coating of A Long Substrate by Use of A Combustion Flame, Surf. Coat. Technol., 1989, 39-40(1), p 235-24010.1016/0257-8972(89)90057-1 ↗
3. H.-C. Chiao, H.-L. Lin, X.-T. Li, and C.-X. Ding, Synthesis of Diamond Crystals and Films Using an Oxygen-Acetylene Flame under Atmospheric Pressure, J. Therm. Spray Technol., 1992, 1(2), p 111-11510.1007/BF02659010 ↗
4. M. Murakawa, S. Takeuchi, and Y. Hirose, An experiment in Large Area Diamond Coating Using A Combustion Flame Torch in Its Traversing Mode, Surf. Coat. Technol., 1990, 43-44(5), p 22-2910.1016/0257-8972(90)90056-I ↗
5. J.-G. Legoux, B. Arsenault, V. Bouyer, C. Moreau, and L. Leblanc, Evaluation of Four High Velocity thermal spray Guns Using WC-10% Co-4% Cr Cermets, J. Therm. Spray Technol., 2002, 11(1), p 86-9410.1361/105996302770349014 ↗
6. Y. Ishikawa, J. Kawakita, S. Kuroda, S. Osawa, T. Itsukaichi, Y. Sakamoto, and M. Takaya, Evaluation of corrosion and wear resistance of hard cermet coatings sprayed by using an improved HVOF process, J. Therm. Spray Technol., 2005, 14(3), p 384-39010.1361/105996305X59378 ↗
7. V. Stoica, R. Ahmed, M. Golshan, and S. Tobe, Sliding Wear Evaluation of Hot Isostatically Pressed thermal spray Cermet Coatings, J. Therm. Spray Technol., 2004, 13(1), p 93-107
8. M. Mohanty and R.W. Smith, Lightweight TiC/Ti Wear-Resistant Coatings for Lightweight Structural Applications, J. Therm. Spray Technol., 1995, 4(4), p 384-39410.1007/BF02648640 ↗
9. A. Lanzutti, M. Lekka, E. Marin, and L. Fedrizzi, Tribological Behavior of thermal spray Coatings, Deposited by HVOF and APS Techniques, and Composite Electrodeposits Ni/SiC at Both Room Temperature and 300 & #xB0;C, Tribol. Ind., 2013, 35(2), p 113-122
10. M. Shi, F. Miyazawa, S. Tobe, and T.A. Stolarski, The Friction and Wear Properties of PTFE Composite-thermal spray Metallic Binary Coatings, Mat. Trans., 2005, 46(1), p 84-8710.2320/matertrans.46.84 ↗
11. D.T. Gawne, Z. Qiu, Y. Bao, T. Zhang, and K. Zhang, Abrasive Wear Resistance of Plasma-Sprayed Glass-Composite Coatings, J. Therm. Spray Technol., 2001, 10(4), p 599-60310.1361/105996301770349114 ↗
12. A.F. Richardson, A. Neville, and J.I.B. Wilson, Developing Diamond MMCs to Improve Durability in Aggressive Abrasive Conditions, Wear, 2003, 255, p 593-60510.1016/S0043-1648(03)00049-8 ↗
13. Y. Ando, S. Tobe, and Hirokazu Tahara, High-Rate Diamond Deposition by Combustion Flame Method Using Twin Acetylene/Oxygen Gas Welding Torch, J. Therm. Spray Technol., 2009, 18(4), p 483-48910.1007/s11666-009-9400-8 ↗
14. Y. Ando, S. Tobe, T. Saito, J. Sakurai, H. Tahara, and T. Yoshikawa, Enlargement of The Diamond Deposition Area in Combustion Flame Method by Traversing Substrate, Thin Solid Films, 2004, 457, p 217-22310.1016/j.tsf.2003.12.042 ↗
15. M. Takahashi, S. Ito, O. Kamiya, and T. Ohyoshi, Synthesis of Diamond Film on Molybdenum Substrate Surface by Combustion Flame Considering the Delamination of the Interface, J. Solid Mech. Mater. Eng., 2007, 1(2), p 223-23110.1299/jmmp.1.223 ↗
16. R. Haubner, A. Lindlbauer, and B. Lux, Diamond deposition on chromium, cobalt and nickel substrates by microwave plasma chemical vapour deposition, Diam. Relat. Mater., 1993, 2(12), p 1505-151510.1016/0925-9635(93)90021-S ↗
17. Z. Sitar, W. Liu, P.C. Yang, C.A. Wolden, R. Schlesser, and J.T. Prater, Heteroepitaxial nucleation of diamond on nickel, Diam. Relat. Mater., 1998, 7(2-5), p 276-28210.1016/S0925-9635(97)00244-6 ↗