Erratum to: From Particle Acceleration to Impact and Bonding in Cold Spraying
Source abstract
Abstract
The authors have notified the publisher of two errors in their article (appearing in this issue), relating to Figs. 13 and 19. (1) The x-axis of Fig. 13 label. As illustrated below, the axis should be titled ‘‘impact velocity [m/s]’’. In the caption and the text the word ‘‘temperature’’ should be replaced by ‘‘velocity’’ as follows: ‘‘Figure 13 summarizes impact calculations performed for 5, 15, 25, 50 and 150 lm Cu particles, where the impact velocity was varied in 50 m/s steps from 300 to 600 m/s. The initial temperature of particles and the substrate material was constant at 20 C. This diagram shows the maximum interface temperature (compare with Fig. 12) of the monitored element set (compare with Fig. 10) as a function of the impact velocity for the different particle sizes. The more or less steep rise in interface temperature indicates the occurrence of shear instabilities. (2) In the caption of Fig. 19, (a) and (b) were interchanged. The correct description is illustrated in the caption for Fig. 19.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Aluminum Alloys Composites Properties · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.