journal article·2012-03

Modeling of Precipitate Formation in Solution Precursor Droplets in a Microwave Plasma

Kaushik Saha, Baki M. Cetegen

Publisher page

Abstract

A comprehensive computational model based on finite difference method was developed to study the heat and mass transport within solution precursor droplets injected into a laminar microwave air plasma flow field. Plasma flow field was simulated as hot gas flowing in a quartz tube generated by volumetric heat addition in the microwave coupling region. The resulting air plasma had a maximum temperature of 6000 K. Droplets containing zirconium acetate precursor of different diameters and solute concentrations were injected into the axisymmetric laminar plasma flow along the centerline of the plasma. Variation of transport properties of the plasma surrounding spherical droplets and absorption of microwave radiation within these droplets were considered in the model. Model predictions suggest that solution droplets are not affected by the microwave radiation in the presence of high convective heat flux from microwave plasma. Smaller droplets and high solute concentrations result in formation of thicker precipitate shells around them based on the homogeneous precipitation hypothesis. Mass transport is found to be slower than heat transfer in the droplets. Microwave plasma allowing the possibility of injecting droplets axially into the high temperature plasma environment present the opportunity to produce more consistent precipitate states as compared to DC arc plasmas into which droplets are typically injected transversely in thermal spray applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Plasma Applications and Diagnostics · Combustion and Detonation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, Wiley, New York, 1995
2. B.M. Cetegen and S. Basu, Review of Modeling of Liquid Precursor Droplets and Particles Injected into Plasmas and High Velocity Oxy-Fuel (HVOF) Flame Jets for Thermal Spray Applications, J. Therm. Spray Technol., 2009, 18(5-6), p 769-79310.1007/s11666-009-9365-7 ↗
3. J.F. Bisson, B. Gauthier, and C. Moreau, Effect of Plasma Fluctuations on In-Flight Particle Parameters, JTTEE5, 2003, 12(1), p 38-43
4. J.F. Bisson and C. Moreau, Effect of Direct-Current Plasma Fluctuations on In-Flight Particle Parameters: Part II, JTTEE5, 2003, 12(2), p 258-264
5. J. Karthikeyan, C.C. Berndt, J. Tikkanen, S. Reddy, and H. Herman, Plasma Spray Synthesis of Nanomaterial Powders and Deposits, Mater. Sci. Eng. A, 1997, 238, p 275-28610.1016/S0921-5093(96)10568-2 ↗
6. N.P. Padture, K.W. Schlichting, T. Bhatia, A. Ozturk, B. Cetegen, E.H. Jordan, M. Gell, S. Jiang, T.D. Xiao, P.R. Strutt, E. Garcia, P. Miranzo, and M.I. Osendi, Towards Durable Thermal Barrier Coatings with Novel Microstructures Deposited by Solution-Precursor Plasma Spray, Acta Mater., 2001, 49, p 2251-225710.1016/S1359-6454(01)00130-6 ↗
7. E.H. Jordan, L. Xie, M. Gell, N.P. Padture, B.M. Cetegen, A. Ozturk, J. Roth, T.D. Xiao, and P.E.C. Bryant, Superior Thermal Barrier Coatings Using Solution Precursor Plasma Spray, J. Therm. Spray Technol., 2004, 13, p 57-6510.1007/s11666-004-0050-6 ↗
8. T. Bhatia, A. Ozturk, L. Xie, E. Jordan, B.M. Cetegen, M. Gell, X. Ma, and N. Padture, Mechanisms of Ceramic Coating Deposition in Solution- Precursor Plasma Spray, J. Mater. Res., 2002, 17(9), p 2363-237210.1557/JMR.2002.0346 ↗
9. N. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas Turbine Applications, Science, 2002, 296, p 280-28410.1126/science.1068609 ↗
10. A. Ozturk and B.M. Cetegen, Experiments on Ceramic Formation from Liquid Precursor Spray Axially Injected into an Oxy-Acetylene Flame, Acta Mater., 2005, 53, p 5203-521110.1016/j.actamat.2005.08.001 ↗
11. M. Gell, L. Xie, X. Ma, E.H. Jordan, and N. Padture, Highly Durable Thermal Barrier Coatings Made by the Solution Precursor Plasma Spray Process, Surf. Coat. Technol., 2004, 177-178, p 97-10210.1016/j.surfcoat.2003.06.023 ↗
12. G.L. Messing, S.C. Zhang, and G.V. Jayanthi, Ceramic Powder Synthesis by Spray Pyrolysis, J. Am. Ceram. Soc., 1993, 76, p 2707-272610.1111/j.1151-2916.1993.tb04007.x ↗
13. S.C. Zhang, G.L. Messing, and M. Borden, Synthesis of Solid, Spherical Zirconia Particles by Spray Pyrolysis, J. Am. Ceram. Soc., 1990, 73(1), p 61-6710.1111/j.1151-2916.1990.tb05091.x ↗
14. G.V. Jayanthi, S.C. Zhang, and G.L. Messing, Modeling of Solid Particle Formation During Solution Aerosol Thermolysis, Aerosol Sci. Technol., 1993, 19, p 478-49010.1080/02786829308959653 ↗
15. D. Chen, E.H. Jordan, and M. Gell, Effect of Solution Concentration on Splat Formation and Coating Microstructure Using the Solution Precursor Plasma Spray Process, Surf. Coat. Technol., 2008, 202, p 2132-213810.1016/j.surfcoat.2007.08.077 ↗
16. C. Marchand, A. Vardelle, G. Mariaux, and P. Lefort, Modelling of the Plasma Spray Process with Liquid Feedstock Injection, Surf. Coat. Technol., 2008, 202, p 4458-446410.1016/j.surfcoat.2008.04.027 ↗
17. A.I. Al-Shamma’a, S.R. Wylie, J. Lucas, and R.A. Stuart, Microwave Plasma Jet for Material Processing at 2.45 GHz, J. Mater. Process. Technol., 2002, 121, p 143-14710.1016/S0924-0136(01)01231-6 ↗
18. S.R. Wylie, A.I. Al-Shamma’a, J. Lucas, and R.A. Stuart, An Atmospheric Microwave Plasma Jet for Ceramic Material Processing, J. Mater. Process. Technol., 2004, 153-154, p 288-29310.1016/j.jmatprotec.2004.04.061 ↗
19. Y.C. Hong, H.S. Uhm, and S.C. Cho, Microwave Plasma Torch Operating at a Low Pressure for Material Processing, Thin Solid Films, 2009, 517, p 4226-422810.1016/j.tsf.2009.02.011 ↗
20. K.M. Green, M.C. Borras, P.P. Woskov, G.J. Flores, III, K. Hadidi, and P. Thomas, Electronic Excitation Temperature Profiles in an Air Microwave Torch, IEEE Trans. Plasma Sci., 2001, 29(2II), p 399-40610.1109/27.922753 ↗
21. K. Hadidi and P. Woskov, Efficient, Modular Microwave Plasma Torch for Thermal Treatment, PSFC MIT, Cambridge, MA, 1999
22. D. Vollath and K.E. Sickafus, Synthesis of Ceramic Oxide Powders in a Microwave Plasma Device, J. Mater. Res., 1993, 8(11), p 2978-298410.1557/JMR.1993.2978 ↗
23. A. Ozturk and B.M. Cetegen, Modeling of Plasma Assisted Formation of Precipitates in Zirconium Containing Liquid Precursor Droplets, Mater. Sci. Eng. A, 2004, 384(1–2), p 331-35110.1016/S0921-5093(04)00870-6 ↗
24. A. Ozturk and B.M. Cetegen, Modeling of Axially and Transversely Injected Precursor Droplets into a Plasma Environment, Int. J. Heat Mass Transf., 2005, 48(21-22), p 4367-438310.1016/j.ijheatmasstransfer.2005.05.015 ↗
25. S. Basu and B.M. Cetegen, Modeling of Thermo-Physical Processes in Liquid Ceramic Precursor Droplets Injected into a Plasma Jet, Int. J. Heat Mass Transf., 2007, 50(17-18), p 3278-329010.1016/j.ijheatmasstransfer.2007.01.036 ↗
26. S. Basu, E.H. Jordan, and Baki.M. Cetegen, Fluid Mechanics and Heat Transfer of Liquid Precursor Droplets Injected into High-Temperature Plasmas, J. Therm. Spray Technol., 2008, 17(1), p 60-7210.1007/s11666-007-9140-6 ↗
27. K. Saha, S. Chaudhuri, and B.M. Cetegen, Modeling of Ceramic Particle Heating and Melting in a Microwave Excited Plasma. ASME J. Heat Transf., 2011, 133, p 031002-1-031002-10
28. B. Abramzon and W.A. Sirignano, Droplet Vaporization Model for Spray Combustion Calculations, Int. J. Heat Mass Transf., 1989, 32(9), p 1605-161810.1016/0017-9310(89)90043-4 ↗
29. M.I. Boulos, P. Fauchais, and E. Pfender, Thermal Plasmas Fundamentals and Applications, Vol 1, Plenum Press, New York, 199410.1007/978-1-4899-1337-1 ↗
30. J.-P. Deplanque and R.H. Rangel, Droplet Stream Combustion in the Steady Boundary Layer Near a Wall, Combust. Sci.Technol., 1991, 78, p 97-11510.1080/00102209108951742 ↗
31. E. Pfender and Y.C. Lee, Particle Dynamics and Particle Heat and Mass Transfer in Thermal Plasmas. Part I. The Motion of a Single Particle Without Thermal Effects, Plasma Chem. Plasma Process., 1985, 5(3), p 211-23710.1007/BF00615122 ↗
32. E. Bourdin, P. Fauchais, and M. Boulos, Transient Heat Conduction Under Plasma Conditions, Int. J. Heat Mass Transf., 1983, 26(4), p 567-58210.1016/0017-9310(83)90008-X ↗
33. M. Renksizbulut and R.J. Haywood, Transient Droplet Evaporation with Variable Properties and Internal Circulation at Intermediate Reynolds Numbers, Int. J. Multiph. Flow, 1988, 14(2), p 189-20210.1016/0301-9322(88)90005-5 ↗
34. D. Kolman, J. Heberlein, and E. Pfender, A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection, Plasma Chem. Plasma Process., 1998, 18(1), p 73-8910.1023/A:1021741310669 ↗
35. NIST/ASME Steam Properties, Version 2.2. NIST Standard Reference Database 10. National Institute of Standards and Technology, Gaithersburg.
36. R. Clift, J.R. Grace, and M.E. Weber, Bubbles, Drops and Particles, Academic Press, New York, 1978
37. W.A. Sirignano, Fluid Dynamics and Transport of Droplets and Sprays, Cambridge University Press, Cambridge, 199910.1017/CBO9780511529566 ↗
38. B. Abramzon and S. Sazhin, Convective Vaporization of a Fuel Droplet with Thermal Radiation Absorption, Fuel, 2006, 85, p 32-4610.1016/j.fuel.2005.02.027 ↗
39. L.E. Johns and R.B. Beckmann, Mechanism of Dispersed-Phase Mass Transfer in Viscous, Single-Drop Extraction System, A.I.Ch.E. J., 1966, 12, p 10-1610.1002/aic.690120105 ↗
40. J.M. Osepchuk, Microwave Technology, Kirk-Othmer Encyclopedia of Chemical Technology, R.E. Kirk and D.F. Othmer, Ed., Wiley, New York, 1981, p 492-522
41. D.E. Christiansen and W.P. Unruh, Use of a TM010 Microwave Cavity at 2.45 GHz for Aerosol and Filament Drying, Ceram. Trans., 1991, 21, p 597-604
42. D.M. Pozar, Microwave Engineering, 2nd ed., Wiley, New York, 1998
43. A. Daif, M. Bouaziz, X. Chesneau, and A. Ali Cherif, Comparison of Multicomponent Fuel Droplet Vaporization Experiments in Forced Convection with the Sirignano Model, Exp. Therm. Fluid Sci., 1999, 18, p 282-29010.1016/S0894-1777(98)10035-3 ↗
44. V.R. Dushin, A.V. Kulchitskiy, V.A. Nerchenko, V.F. Niktin, E.S. Osadchaya, Yu.G. Phylippov, and N.N. Smirnov, Mathematical Simulation for Non-Equilibrium Droplet Evaporation, Acta Astronaut., 2008, 63, p 1360-137110.1016/j.actaastro.2008.05.021 ↗
45. A.K. Datta, Heat and Mass Transfer in the Microwave Processing of Food, Chem. Eng. Prog., 1990, 86, p 47-53
46. D. Dewitt and F.P. Incropera, Fundamentals of Heat and Mass Transfer, Wiley, New York, 2001