journal article·2013-08

Effects of Enthalpy-Enhancing Gas on Ionic Conductivity of Atmospheric Plasma-Sprayed 3.9YSZ Electrolyte for 45-75 μm Particles

Hann-Pyng Wu, Kuan-Zong Fung

Publisher page

Abstract

Enthalpy-enhancing gas is used to optimize the ionic conductivity of atmospheric plasma-sprayed 3.9 mol% yttria-stabilized zirconia (3.9YSZ) electrolyte. In the experiment, three hydrogen gas-flow rates were used to control the plasma energy. The size of the 3.9YSZ feedstock powder was sieved to be set in the range of 45-75 μm. When the hydrogen gas-flow rate was increased, the electrolyte became harder, and the sprayed surfaces became smoother. However, the lowest apparent porosity and the highest bulk density of the electrolyte were obtained at a hydrogen gas-flow rate of 7 L/min. A 3.9YSZ electrolyte with an ionic conductivity of 2860 µ(S/cm) and the lowest dissociation energy was obtained at 800 °C with a hydrogen gas-flow rate of 12 L/min. It was controlled by the intragrain conductivities. A higher hydrogen gas-flow rate enhanced the growth of columnar grains and suppressed the appearance of the monoclinic phase, which led to the greater intragrain conductivities. The increase in grain-boundary conductivities is closely related to the decrease in grain size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. H. Kim, S. Park, J.M. Vohs, and R.J. Gorte, Direct Oxidation of Liquid Fuels in a Solid Oxide Fuel Cell, J. Electrochem. Soc., 2001, 148(7), p A693-A69510.1149/1.1374216 ↗
2. C. Lu, W.L. Worrell, R.J. Gorte, and J.M. Vohs, SOFCs for Direct Oxidation of Hydrocarbon Fuels with Samaria-Doped Ceria Electrolyte, J. Electrochem. Soc., 2003, 150(3), p A354-A35810.1149/1.1553765 ↗
3. R.J. Gorte and J.M. Vohs, Novel SOFC Anodes for the Direct Electrochemical Oxidation of Hydrocarbons, J. Catal., 2003, 216, p 477-48610.1016/S0021-9517(02)00121-5 ↗
4. M.D. Gross, J.M. Vohs, and R.J. Gorte, A Strategy for Achieving High Performance with SOFC Ceramic Anodes, Electrochem. Solid-State Lett., 2007, 10(4), p B65-B6910.1149/1.2432942 ↗
5. G. Kim, G. Corre, J.T.S. Irvine, J.M. Vohs, and R.J. Gorte, Engineering Composite Oxide SOFC Anodes for Efficient Oxidation of Methane, Electrochem. Solid-State Lett., 2008, 11(2), p B16-B1910.1149/1.2817809 ↗
6. N.Q. Minh, Ceramic Fuel Cells, J. Am. Ceram. Soc., 1993, 76(3), p 563-58810.1111/j.1151-2916.1993.tb03645.x ↗
7. N. Kiratzis, P. Holtappels, C.E. Hatchwell, and J.T.S. Irvine, Preparation and Characterization of Copper/Yttria Titania Zirconia Cermets for Use as Possible Solid Oxide Fuel Cell Anodes, Fuel Cells, 2001, 1(3-4), p 211-21810.1002/1615-6854(200112)1:3/4<211::AID-FUCE211>3.0.CO;2-H ↗
8. J.W. Fergus, Electrolytes for Solid Oxide Fuel Cells, J. Power Sources, 2006, 162, p 30-4010.1016/j.jpowsour.2006.06.062 ↗
9. H. Inaba and H. Tagawa, Ceria-Based Solid Electrolytes, Solid State Ion., 1996, 83, p 1-1610.1016/0167-2738(95)00229-4 ↗
10. M. Dudek and J. Molenda, Ceria-Yttria-Based Solid Electrolytes for Intermediate Temperature Solid Oxide Fuel Cell, Mater. Sci.-Pol., 2006, 24(1), p 45-52
11. D. Maland, C. Suciu, I. Warnhus, and A.C. Hoffmann, Sintering of 4YSZ (ZrO2 + 4 mol% Y2O3) Nanoceramics for Solid Oxide Fuel Cells (SOFCs), Their Structure and Ionic Conductivity, J. Eur. Ceram. Soc., 2009, 29(12), p 2537-254710.1016/j.jeurceramsoc.2009.03.013 ↗
12. B.D. White and O. Kesler, Implications of Electronic Short Circuiting in Plasma Sprayed Solid Oxide Fuel Cells on Electrode Performance Evaluation by Electrochemical Impedance Spectroscopy, J. Power Sources, 2008, 177, p 104-11010.1016/j.jpowsour.2007.11.014 ↗
13. L. Rose, O. Kesler, Z. Tang, and A. Burgess, Application of Sol Gel Spin Coated Yttria-Stabilized Zirconia Layers for the Improvement of Solid Oxide Fuel Cell Electrolytes Produced by Atmospheric Plasma Spraying, J. Power Sources, 2007, 167, p 340-34810.1016/j.jpowsour.2007.01.081 ↗
14. D. Waldbilling and O. Kesler, The Effect of Solids and Dispersant Loadings on the Suspension Viscosities and Deposition Rates of Suspension Plasma Sprayed YSZ Coatings, Surf. Coat. Technol., 2009, 203, p 2098-210110.1016/j.surfcoat.2008.11.027 ↗
15. C.X. Li, C.J. Li, and L.J. Guo, Effect of Composition of NiO/YSZ Anode on the Polarization Characteristics of SOFC Fabricated by Atmospheric Plasma Spraying, Int. J. Hydrogen Energy, 2010, 35, p 2964-296910.1016/j.ijhydene.2009.05.041 ↗
16. A. Ohmori and C.J. Li, Quantitative Characterization of the Structure of Plasma-Sprayed Al2O3 Coating by Using Copper Electroplating, Thin Solid Films, 1991, 201, p 241-25210.1016/0040-6090(91)90114-D ↗
17. K.A. Khor, L.G. Yu, S.H. Chan, and X.J. Chen, Densification of Plasma Sprayed YSZ Electrolytes by Spark Plasma Sintering (SPS), J. Eur. Ceram. Soc., 2003, 23, p 1855-186310.1016/S0955-2219(02)00421-1 ↗
18. M. Omori, Sintering, Consolidation, Reaction and Crystal Growth by the Spark Plasma System (SPS), Mater. Sci. Eng. A, 2000, 287, p 183-18810.1016/S0921-5093(00)00773-5 ↗
19. M. Scagliotti, F. Parmigiani, G. Samoggia, G. Lanzi, and D. Richon, Structural Properties of Plasma-Sprayed Zirconia-Based Electrolytes, J. Mater. Sci., 1988, 23, p 3764-377010.1007/BF00540525 ↗
20. C.J. Li, C.X. Li, and X.J. Ning, Performance of YSZ Electrolyte Layer Deposited by Atmospheric Plasma Spraying for Cermet-Supported Tubular SOFC, Vacuum, 2004, 73, p 699-70310.1016/j.vacuum.2003.12.096 ↗
21. M. Lang, R. Henne, S. Schaper, and G. Schiller, Development and Characterization of Vacuum Plasma Spraying Thin Film Solid Oxide Fuel Cells, J. Therm. Spray Technol., 2001, 10(4), p 618-62510.1361/105996301770349141 ↗
22. M. Lang, T. Franco, G. Schiller, and N. Wagner, Electrochemical Characterization of Vacuum Plasma Sprayed Thin-Film Solid Oxide Fuel Cells (SOFC) for Reduced Operating Temperatures, J. Appl. Electrochem., 2002, 32, p 871-87410.1023/A:1020591323343 ↗
23. N. Benoved and O. Kesler, A New Technique for the Rapid Manufacturing of Direct Oxidation Anodes for SOFC’s, Adv. Mater. Res., 2007, 15-17, p 287-29210.4028/www.scientific.net/AMR.15-17.287 ↗
24. N. Benoved and O. Kesler, Air Plasma Spray Processing and Electrochemical Characterization of Cu-SDC Coatings for Use in Solid Oxide Fuel Cell Anodes, J. Power Sources, 2009, 193, p 454-46110.1016/j.jpowsour.2009.04.003 ↗
25. S. Takenoiri, N. Kadokawa, and K. Koseki, Development of Metallic Substrate Supported Planar Solid Oxide Fuel Cells Fabricated by Atmospheric Plasma Spraying, J. Therm. Spray Technol., 2000, 9(3), p 360-36310.1361/105996300770349809 ↗
26. L.J.H. Kuo, S.D. Vora, and S.C. Singhal, Plasma Spraying of Lanthanum Chromite Films for Solid Oxide Fuel Cell Interconnection Application, J. Am. Ceram. Soc., 1997, 80(3), p 589-59310.1111/j.1151-2916.1997.tb02871.x ↗
27. R. VaBen, D. Hathiramani, J. Mertens, V.A.C. Haanappel, and I.C. Vinke, Manufacturing of High Performance Solid Oxide Fuel Cells (SOFCs) with Atmospheric Plasma Spraying (APS), Surf. Coat. Technol., 2007, 202, p 499-50810.1016/j.surfcoat.2007.06.064 ↗
28. R. Hui, Z. Wang, O. Kesler, L. Rose, J. Jankovic, S. Yick, R. Maric, and D. Ghosh, Thermal Plasma Spraying for SOFCs: Applications, Potential Advantages, and Challenges, J. Power Sources, 2007, 170, p 308-32310.1016/j.jpowsour.2007.03.075 ↗
29. J. Harris and O. Kesler, Atmospheric Plasma Spraying Low-Temperature Cathode Materials for Solid Oxide Fuel Cells, J. Therm. Spray Technol., 2010, 19(1), p 328-33510.1007/s11666-009-9441-z ↗
30. C.J. Li, A. Ohmori, and R. McPherson, The Relationship Between Microstructure and Young’s Modulus of Thermally Sprayed Ceramic Coatings, J. Mater. Sci., 1997, 32, p 997-100410.1023/A:1018574221589 ↗
31. E. Barsoukov, Impedance Spectroscopy Theory, Experiment, and Application, 2nd ed., E. Barsoukov and J.R. Macdonald, Eds., Wiley, Hoboken, 200510.1002/0471716243 ↗
32. J.B. Bauerle, Study of Solid Electrolyte Polarization by a Complex Admittance Method, J. Phys. Chem. Solids, 1969, 30, p 2657-267010.1016/0022-3697(69)90039-0 ↗
33. Surface Texture, ANSI B46.1, The American Society of Mechanical Engineer, 1978, p 27
34. D. Matejka and B. Benko, Plasma Spraying of Metallic and Ceramic Materials, Wiley, Chichester, 1989
35. D. Maland, C. Suciu, I. Warnhus, and A.C. Hoffmann, Sintering of 4YSZ (ZrO2 + 4 mol% Y2O3) Nanoceramics for Solid Oxide Fuel Cells (SOFCs), Their Structure and Ionic Conductivity, J. Eur. Ceram. Soc., 2009, 29, p 2537-254710.1016/j.jeurceramsoc.2009.03.013 ↗
36. Y.Z. Xing, C.J. Li, C.X. Li, and G.J. Yang, Influence of Through-Lamella Grain Growth on Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia as an Electrolyte in Solid Oxide Fuel Cells, J. Power Sources, 2008, 176, p 31-3810.1016/j.jpowsour.2007.10.031 ↗
37. S.P.S. Badwal, Electrical Conductivity of Sc2O3-ZrO2 Compositions by 4-Probe d.c. and 2-Probe Complex Impedance Techniques, J. Mater. Sci., 1983, 18, p 3117-312710.1007/BF00700796 ↗
38. M. Filal, C. Petot, M. Mokchah, C. Chateau, and J.L. Carpentier, Ionic Conductivity of Yttrium-Doped Zirconia and the “Composite Effect”, Solid State Ion., 1995, 80, p 27-3510.1016/0167-2738(95)00137-U ↗
39. P. Mondal, A. Klein, W. Jaegermann, and H. Hahn, Enhanced Specific Grain Boundary Conductivity in Nanocrystalline Y2O3-Stabilized Zirconia, Solid State Ion., 1999, 118, p 331-33910.1016/S0167-2738(98)00452-4 ↗
40. C. Zhang, C.J. Li, G. Zhang, X.J. Ning, C.X. Li, H. Liao, and C. Coddet, Ionic Conductivity and Its Temperature Dependence of Atmospheric Plasma-Sprayed Yttria Stabilized Zirconia Electrolyte, Mater. Sci. Eng. B, 2007, 137, p 24-3010.1016/j.mseb.2006.10.005 ↗
41. R. Chiba, T. Ishii, and F. Yoshimura, Temperature Dependence of Ionic Conductivity in (1−x)ZrO2-(x−y)Sc2O3-yYb2O3 Electrolyte Material, Solid State Ion., 1996, 91, p 249-25610.1016/S0167-2738(96)00435-3 ↗
42. I. Kosacki, J.U. Anderson, Y. Mizutani, and K. Ukai, Nonstoichiometry and Electrical Transport in Sc-Doped Zirconia, Solid State Ion., 2002, 152-153, p 431-43810.1016/S0167-2738(02)00382-X ↗
43. M. Weller and H. Schubert, Internal Friction, Dielectric Loss, and Ionic Conductivity of Tetragonal Zirconia ZrO2-3% Y2O3 (Y-TZP), J. Am. Ceram. Soc., 1986, 69(7), p 573-57710.1111/j.1151-2916.1986.tb04795.x ↗
44. A. Cheikh, A. Madani, A. Touati, H. Boussetta, and C. Monty, Ionic Conductivity of Zirconia Based from Single Crystals to Nanostructured Polycrystals, J. Eur. Ceram. Soc., 2001, 21, p 1837-184110.1016/S0955-2219(01)00126-1 ↗
45. P.S. Manning, J.D. Sirman, R.A. De Souza, and J.A. Kilner, The Kinetics of Oxygen Transport in 9.5 mol% Single Crystal Yttria Stabilized Zirconia, Solid State Ion., 1997, 100, p 1-1010.1016/S0167-2738(97)00345-7 ↗
46. C.L. Curtis, D.T. Gawne, and M. Priestnall, The Processing and Electrical Properties of Plasma-Sprayed Yttria-Zirconia, J. Mater. Sci., 1994, 29, p 3102-310610.1007/BF00356651 ↗
47. M. Yoshimura, M. Yashima, and T. Noma, Formation of Diffusionlessly Transformed Tetragonal Phases by Rapid Quenching of Melts in ZrO2-ROl.5 systems (R = rare earths), J. Mater. Sci., 1990, 25, p 2011-201610.1007/BF01045757 ↗
48. H. Toraya, M. Yoshimura, and S. Somiya, Calibration Curve for Quantitative Analysis of the Monoclinic-Tetragonal ZrO2 System by X-ray Diffraction, Commun. Am. Ceram. Soc., 1984, 67, p C-119-C-12110.1111/j.1151-2916.1984.tb19715.x ↗
49. H. Toraya, M. Yoshimura, and S. Somiya, Quantitative Analysis of Monoclinic-Stabilized Cubic ZrO2 Systems by X-ray Diffraction, Commun. Am. Ceram. Soc., 1984, 67, p C-183-C-18410.1111/j.1151-2916.1984.tb19614.x ↗
50. H.G. Scott, Phase Relationships in the Zirconia-Yttria System, J. Mater. Sci., 1975, 10, p 1527-153510.1007/BF01031853 ↗
51. J. Moon, H. Choi, and C. Lee, Cooling Rate Effects on the Phase Transformation of ZrO2 Base Thermal Barrier Coatings Coated by APS, J. Ceram. Process. Res., 2000, 1(1), p 69-73
52. N. Bonanos, R.K. Slotwinski, B.C.H. Steele, and E.P. Butler, Electrical Conductivity/Microstructural Relationships in Aged CaO and CaO + MgO Partially-Stabilized Zirconia, J. Mater. Sci., 1984, 19, p 785-79310.1007/BF00540449 ↗
53. X. Guo, Physical Origin of the Intrinsic Grain-Boundary Resistivity of Stabilized-Zirconia: Role of the Space-Charge Layers, Solid State Ion., 1995, 81, p 235-24210.1016/0167-2738(95)00180-E ↗
54. S.P.S. Badwal, F.T. Ciacchi, S. Rajendran, and J. Drennan, An Investigation of Conductivity, Microstructure and Stability of Electrolyte Compositions in the System 9 mol% (Sc2O3-Y2O3)-ZrO2(Al2O3), Solid State Ion., 1998, 109, p 167-18610.1016/S0167-2738(98)00079-4 ↗
55. C. Haering, A. Roosen, and H. Schichl, Degradation of the Electrical Conductivity in Stabilised Zirconia Systems. Part I: Yttria-Stabilised Zirconia, Solid State Ion., 2005, 176, p 253-25910.1016/j.ssi.2004.07.038 ↗
56. B. Butz, P. Kruse, H. Stormer, D. Gerthsen, A. Muller, A. Wber, and E. Ivers-Tiffee, Correlation Between Microstructure and Degradation in Conductivity for Cubic Y2O3-Doped ZrO2, Solid State Ion., 2006, 177, p 3275-328410.1016/j.ssi.2006.09.003 ↗
57. M. Hattori, Y. Takeda, Y. Sakaki, A. Nakanishi, S. Ohara, K. Mukai, J.H. Lee, and T. Fukui, Effect of Aging on Conductivity of Yttria Stabilized Zirconia, J. Power Sources, 2004, 126, p 23-2710.1016/j.jpowsour.2003.08.018 ↗
58. M. Han, X. Tang, H. Yin, and S. Peng, Fabrication, Microstructure and Properties of a YSZ Electrolyte for SOFCs, J. Power Sources, 2007, 165, p 757-76310.1016/j.jpowsour.2006.11.054 ↗
59. X.J. Chen, K.A. Khor, S.H. Chan, and L.G. Yu, Influence of Microstructure on the Ionic Conductivity of Yttria-Stabilized Zirconia Electrolyte, Mater. Sci. Eng. A, 2002, 335, p 246-25210.1016/S0921-5093(01)01935-9 ↗
60. X.J. Chen, K.A. Khor, S.H. Chan, and L.G. Yu, Overcoming the Effect of Contaminant in Solid Oxide Fuel Cell (SOFC) Electrolyte: Spark Plasma Sintering (SPS) of 0.5 wt.% Silica-Doped Yttria-Stabilized Zirconia (YSZ), Mater. Sci. Eng. A, 2004, 374, p 64-7110.1016/j.msea.2003.12.028 ↗
61. B.D. Culity, Elements of X-ray Diffraction, Addison-Wesley, Reading, 1978